P-R-M 1000-40/03 epoxy discs, slotted and with serrated edge, for Mecatech
€24.90
Available
Product information "P-R-M 1000-40/03 epoxy discs, slotted and with serrated edge, for Mecatech"
Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!
Dimensions:
- Outer diameter: 64 mm
- Internal dimension: 18 mm (square)
- Material thickness: 1,8 mm
Suitable for:
- 3002 Crosshydro hydraulic brake
- 1001 Mecatech twin piston hydraulic brake
Content:
- 2 Pieces
Login
Accessories / Spare parts
PRM premium quality epoxy brake discs Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmSocket size: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brakeContent:2 Pieces
PRM premium quality epoxy brake discs. Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brake FG Evo2020Content:2 Pieces
Customers also bought
Genuine HT spare/option part.Connecting springs for Samba 7 pipes.Lenght: approx 18 mmWire thickness: 0,8 mmContents:8 pieces
Genuine FG spare/option part. Contents:2 pieces
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)12 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 12 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Content:2 pieces
Suitable for Opel Calibra 93 and ITC, Chrysler Viper and Evo chassis.
Customers also viewed
PRM premium quality epoxy brake discs Suitable for the FG brake 9540 and 9541, replaces the original brake disc (9445/05).The 15 slot cuts enable better absorption of tire wear or dirt deposits!Dimensions: Outer diameter: 69 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brake in FG Evo 2020Content:2 Pieces
PRM premium quality epoxy brake discs. Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brake FG Evo2020Content:2 Pieces
Y-connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.
Genuine Mecatech spare/option part. Contents:4 pieces
Top quality epoxy P-R-M Race brake discs with 10 dirt slots for removing dirt and abrasion, which will be transferred to the outside by the discs rotation. The epoxy P-R-M Race brake disc provides an optimal deceleration of the car without the unwanted fading (poor braking performance due to increased heat buildup)! The best braking action when using the epoxy P-R-M Race brake disc is achieved by the combination of the epoxy brake discs and steel brake pads (8456 or y19218). The epoxy P-R-M Race brake discs fit mechanical front and rear brakes on FG / Smartech / Carson cars with brake pads 8456 recommended for these applications.1 pair (2 pieces) Dimensions: Outer diameter: 60 mm Thickness: 2 mmsocket for 18 mm square wheel drive
Replacement part for Mecatech twin piston hydraulic brake 1,5mm.Not fit into the new vision (2,5 mm)