Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

Mielke rain airbox/air filter 5210

Product information "Mielke rain airbox/air filter 5210"

Genuine Mielke spare/option part.

Complete set including airbox (rain version with elbow fittings on the intake side) with reuseable foam filter element, billet aluminum venturi adapter with o-rings, filter oil and hardware.

Content:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y0523 Special cleaner for foam air filters, 500 ml
Genuine rc-car-online spare/option part. Foam-Cleaner, special cleaning agent for foam air filter elements and GPM coverThe foam-Cleaner is specially designed for RC foam air filters, as well as covers for starter, filter and shocks. Removes reliably dirt, mud, dust, old filter oil, and sand particles and ensures optimum air flow. After cleaning please oil the air filter with air filter oil with order-no. y0284 for foam filters before re-use. Routinely cleaning of filters protects against premature wear and extends engine life!Use: apply cleaner to filter/cover, wait for some minutes and rinse with warm water. Let the parts dry before re-use.Bottle with 500 ml.Contents:1 piece

Content: 500 Milliliter (€19.90* / 1000 Milliliter)

€9.95*

Customers also bought

Average rating of 0 out of 5 stars

y0700/01 Single-sided alloy servoarm, 1 pce.
Item N° y0700/01 Single-sided alloy servoarm, 1 pce.Suitable for all servos with an output shaft with 25 teeth multi-tooth shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!When you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.

€8.90*

Average rating of 0 out of 5 stars

2012-226 Mecatech Central weight for Short car
Genuine Mecatech spare/option part for the FW01.Attention:does only fit the chassis plate with corresponding cut-outs and mounting provision!Content:2 pieces

€37.40*

Average rating of 0 out of 5 stars

2012-195 Mecatech Front weights
Genuine Mecatech spare/option part for the FW01.Attention:does only fit the chassis plate with corresponding cut-outs and mounting provision!Content:2 pieces

€37.40*

Average rating of 0 out of 5 stars

2009-42 Mecatech Coated shock rod
Genuine FG spare/option part. Spare part for MecaTech order no.: 2011 Mecatech Big Bore Shocks, 2 pcs. Content:1 piece

€16.50*

Average rating of 0 out of 5 stars

6079/05 FG Ball driving axle M8
Original FG Ersatz-/Tuningteil.Inhalt:1 Stück

€35.90*

Average rating of 0 out of 5 stars

2012-144 Mecatech Retainer Ring for Shocks
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€2.20*

Similar products

Average rating of 0 out of 5 stars

5201 Mielke airbox/air filter
Genuine FG spare/option part. Complete set including airbox with reuseable foam filter element, billet aluminum venturi adapter with o-rings, filter oil and hardware.Version with o-ring "locks" for better sealing and easier assembly, new venturi adapter to reduce fuel consumption.AttentionThe venturi adapter can only be used on carbs without choke!Contents:1 set

€78.00*

Average rating of 0 out of 5 stars

5250 Mielke Air Booster carbon airbox
Genuine Mielke spare/option part.The Carbon Air Booster No. 5250 has been specially developed for the tough race use! The complete air filter weighs 138 grams with all attachments and aluminum adapter, the carbon part alone weighs 66 grams.Nevertheless, an extreme stability has been achieved through the bulges in the mold. Furthermore, the design ensures a straight air flow in conjunction with the new air ducts. When using these ducts, the fresh air from the cooling opening is pressed directly into the air booster, increasing engine performance or reducing temperatures.Contents:1 piece

€111.30*

Average rating of 0 out of 5 stars

Mielke 5201/01 airbox/air filter upgrade kit, 1 pce.
This upgrade kit is for all those who already have an appropriate venturi adapter. If you're looking for a complete airbox set we recommend Mielke airbox/air filter set #5201.Set including airbox with reuseable foam filter element, o-rings, filter oil and hardware.New version with o-ring "locks" for better sealing and easier assembly.Only for use with the blue Mielke Airbox or identically constructed units!

€49.90*

Customers also viewed

%

Average rating of 0 out of 5 stars

Original Zenoah engine to choose with carburetor and spark plug
y0557 Zenoah G230RC, with Walbro WT 603B carburetor (also available in the ball-raced version through the shop's options menu)23 cm³ Zenoah engine for large scale cars!The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch are optionally available at additional charge.y1009 Zenoah G240RC with Walbro WT 990 carburetor (also available in the ball-raced version through the shop's options menu)23 cm³ Zenoah engine for large scale cars!Please note: contrary to their new designation the displacement has not been increased! The outer dimension didn't change, so you don't need any additional parts for the engine swap!The engines feature the following improvements over their G230RC:- Quantity of cylinder mounting bolts increased from 2 to 4- Improved strength of crankcase- Added additional bearing on the PTO (clutch) side of crankshaft- Redesigned shape of cylinder fins- Dimension of air intake port is 5% widerContains internal fuel pump which increases acceleration from idle to wide open throttle.Removal of choke valve increases performance by increasing air flow to the carburetor - Changed material of the insulator gasket to metal, which improves sealing performanceThe engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch are optionally available at additional charge. y0553 Zenoah G260RC with Walbro WT 603B carburetor (also available in the ball-raced version through the shop's options menu)This is the G260 in the 26 cm³ version.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch are optionally available at additional charge. y1011 Zenoah G270RC with Walbro WT 990 carburetor (also available in the ball-raced version through the shop's options menu)26 cm³ Zenoah engine for large scale cars!Please note: contrary to their new designation the displacement has not been increased! The outer dimension didn't change, so you don't need any additional parts for the engine swap!The engines feature the following improvements over their G260RC:- Quantity of cylinder mounting bolts increased from 2 to 4- Improved strength of crankcase- Added additional bearing on the PTO (clutch) side of crankshaft- Redesigned shape of cylinder fins- Dimension of air intake port is 5% wider- New carburetor (WT-990) Contains internal fuel pump which increases acceleration from idle to wide open throttle.Removal of choke valve increases performance by increasing air flow to the carburetor - Changed material of the insulator gasket to metal, which improves sealing performanceThe engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter are optionally available at additional charge. 7800 Zenoah G290RC with Walbro WT 990 carburetor (also available in the ball-raced version through the shop's options menu)Same dimensions as the Zenoah G230, G240, G260, G270.New generation Zenoah engine with 28,5ccm cylinder capacity and approx. 3.9 hp. The cylinder is fixed with 4 screws. The technical details are identical to the Zenoah engines G240RC and G270RC.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise.Zenoah G320RC with Walbro WT 1107 carburetor (also available in the ball-raced version through the shop's options menu)With 32 cm³ and 30% more power than the Zenoah G290.Significantly more torque and higher stamina due to larger sized bearings all around, with Racing Carburetor Walbro WT 1107.The motor is supplied with WT-1107 carburetor and spark plug.SpecificationType: Two stroke gasoline engineDisplacement: 31,8 cm³Bore: 38 mmStroke: 28 mmWeight: 2,3 KgOverall Dimension:Length: 167 mmWidth: 215 mmHeight: 196 mmMaximum Output: 4,6 PSMaximum Torque: 2,00 N-mRotation Direction: CounterclockwiseCarburetor: Walbro WT-1107Spark plug: CMR7HStarting: Recoil starterFor all HPI Baja 5 cars the G320RCer clutch housing has to be shortened at the mounting base, for Losi 5ive- T and Desert Buggy XL cars the clutch housings overall length must be shortened to CY size.When installing the air filter you must pay attention to the length of the screws.For use on Losi and HPI we recommend M5x45 screws (like H94763); you can also cut existing screws to length, of course.When ordering with a modified clutch housing we will include these screws!In our shop you can select from Zenoah G320RC engines already modified to fit your HPI or Losi car.The installation of the Zenoah G320RC in other cars (like FG or Smartech buggies / monsters a.s.o.) is not even remotely straightforward, since the layshaft pinion (the small pinion in front of the big differential spur gear) is in the way for the larger Zenoah G320RC crankcase.Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise.

€259.90* €299.90* (13.34% saved)

Average rating of 0 out of 5 stars

304032/10 Carson Wild GP Air Filter, set
Genuine Carson spare/option part. Set includet:- B091-97 Air filterContents:1 set

€49.90*

Average rating of 0 out of 5 stars

Mielke 5201/01 airbox/air filter upgrade kit, 1 pce.
This upgrade kit is for all those who already have an appropriate venturi adapter. If you're looking for a complete airbox set we recommend Mielke airbox/air filter set #5201.Set including airbox with reuseable foam filter element, o-rings, filter oil and hardware.New version with o-ring "locks" for better sealing and easier assembly.Only for use with the blue Mielke Airbox or identically constructed units!

€49.90*

Average rating of 0 out of 5 stars

6442 FG Special air filter set washable
K+N air filter with a very good dust filter for Off and On Road.Inner diameter adaptor flange 62 mm

€56.10*

Average rating of 0 out of 5 stars

9467 FG Airbox 09 with choke, set.
Light and very solid air box, high air permeability for more engine power. With choke for the Zenoah engines G240RC and G270RC in 1:5 touring cars and 1:6 race trucks. DMC legal ( No. DMC 5 - 093 ).The set includes: Air filter adapter, air box, foam filter, gaskets and installation hardware.

€86.90*

Average rating of 0 out of 5 stars

y1608 SPEED TEC CRANK Team-Edition Zenoah G320 7-port Tuning engine
The SPEED TEC CRANK genuine Zenoah engine is optimized for performance by hand with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC Team Edition version modifications: Cylinder & case:Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust, intake is flow-optimized the case is specially matched with enlarged and flow-optimized cross section towards the ports Crankshaft:is adjusted, aligned and balancedFlywheel and ignition:Latest SPEED TEC CRANK SV ignition system for rc-car race engines with air baffles, a special balanced 62 mm diameter flywheel, modified ignition coil mount and special ignition system allows for the extremely fast revving of the SPEED TEC team edition engine and guarantees a significantly improved performance.The machined and more than 30% lighter than stock CRANK flywheel with fins on both sides contributes to the optimized engine cooling.Gaskets:Premium quality gaskets installed.Isolator:Special matched and raised insulator Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€1,099.00*

Average rating of 0 out of 5 stars

5900 Mielke Big Tornado Titanium tuned pipe muffler system DMC #10-1503 with manifold
Genuine Mielke spare/option part. We took a very long time to test this mufflerer thoroughly and to test and compare small changes again and again already in summer 2017 on different vehicles on different race tracks. All experiences were then analysed in detail and combined with the bench tests from last year and, of course also from winter 2018, to the current final product no. 5900.The very good results and the weight optimization (titanium is approx. 40% lighter compared to steel) along with the great racy look should give us a perfect tuned pipe system for 1/5 touring cars.Modified engines, which are widely used, are especially grateful for the low thermal expansion (approx. 40% less) and the high temperature resistance (perfect for exhaust gases).The material used is only 0.7 mm thick and yet very strong.Combined with the very well tested Masterfix connection (3 springs connect the manifold to the pipe) and the Teflon gasket, which has been tested for years, there will also be no problems with the connection to the manifold.Contents:1 piece

€419.00*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development