Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

7100 FG Adjusting clip for 16 mm axle, 16 pcs.

Product information "7100 FG Adjusting clip for 16 mm axle, 16 pcs."

These adjusting clips allow a faster adjustment of the wishbones. Suitable for front and rear suspension.

The set contains 16 adjusting clips in 2 and 6mm size for 6 mm axles.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

6734/05 FG Washers steel 5,3mm - 15pcs.
Part is delivered in silver or black color from vendor!

€2.60*

Average rating of 0 out of 5 stars

6077/08 FG Spacer bushing for rear upright
Genuine FG spare/option part. Only suitable with standard size ball bearings.Dimensions:Length: 10 mmOuter diameter: 11 mmInner diameter: 8 mmContents:2 pieces

€4.90*

Average rating of 0 out of 5 stars

8505 FG Mounting tool for bevel gear wheels - 1pce.
We essentially simplyfied the inserting of the differential bevel gear wheels with the mounting tool. Through the exact positioning of the bevel gear wheels it is guaranteed that the differential bevel wheel axle and the differential driving axle are in true alignment from the beginning.

€7.90*

Average rating of 0 out of 5 stars

6077/01 FG rear uprights, 2 pcs.
Bearing seats 22x7 mm

€11.00*

Average rating of 0 out of 5 stars

6422 FG Plastic gearwheel 44 teeth - 1pce.
44 teeth plastic main gear for the layshaft.Diameter 69 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

Average rating of 0 out of 5 stars

6432/02 FG Steel pinion 19 teeth - 1pce.
Item N° 6432/02 Steel pinion 19 teeth - 1pce.For combination with 44T main spur gear.Diameter 32.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€35.00*

Similar products

Average rating of 0 out of 5 stars

7154 FG Body mount adjustable, 1 pce.
Adjustable body mount with heigt-adjustable body support.Measures:Length 110 mmDiameter 8 mm10 mm at the baseFor all cars and body shells.

€10.90*

Average rating of 0 out of 5 stars

7155 FG Body mount short adjustable
Genuine FG spare/option part. Adjustable body mount with heigt-adjustable body support.Dimensions:Length: 55 mmDiameter: 8 mmThe Base: 10 mmFor all cars and body shells.Contents:1 piece

€10.90*

Average rating of 0 out of 5 stars

7152/01 FG Extended rear mount
Genuine FG spare/option part. Fits all touring cars and Porsche 530.( Not for Mini Cooper und Porsche 465/510.)Contents:1 piece

€19.90*

Average rating of 0 out of 5 stars

7152/02 FG Body mount front - 2pcs.
Total length: 60mmLength until body support: approx. 50mm

€8.70*

Average rating of 0 out of 5 stars

7093 FG Silicone o-ring - 12pcs.
Inner diameter 4 mmThickness 2 mm

€6.90*

Average rating of 0 out of 5 stars

7103/08 FG Distance bush for front upright
Genuine FG spare/option part.The installation of these spacer bushings between the ball bearings in the uprights allows you to tighten the wheel nut strongly. Suitable for all FG plastic and alloy uprights.Dimensions:Outer diameter: 11 mmWidth: 7 mmInner diameter 8,22 mmContents:2 pieces

€4.30*

Average rating of 0 out of 5 stars

7102 FG Front wishbone pin - 2pcs.
6 x 87 mm

€10.50*

Average rating of 0 out of 5 stars

7154/01 FG Body mount adjustable 80mm
Genuine FG spare/option part.Adjustable body mount with heigt-adjustable body support.Fits RC-models and bodies.Contents:1 set

€10.90*

Average rating of 0 out of 5 stars

7153 FG Extended rear body mount distance - 3pcs.
Distance rod for .Diameter 9.5 mmLength 75 mm

€13.90*

Average rating of 0 out of 5 stars

7099 FG Distance disk - 8pcs.
Spacer bushings for front axle caster adjustment.Outer diameter 11 mmInner diameter 6.3 mmWidth 6 mm

€3.90*

Average rating of 0 out of 5 stars

7106 FG ATS rim silver 65mm - 2pcs.
Suitable for all FG 1:5 models and other makes.Rim with 18 mm square driveRim width: 65mmRim diamter: 95mmColour: Silver

€19.50*

Average rating of 0 out of 5 stars

7143 FG/Carson/Smartech Tank mounting for Zenoah tank - 2pcs.
Suitable for .

€23.90*

Customers also viewed

Average rating of 0 out of 5 stars

7352 FG Fuel tube for Zenoah, 1 pce.
Spare part for 7348 also suitable for the Losi 5ive-T.Measures:Inner diameter: 3.2 mm Length: 400 mm

€7.90*

Average rating of 0 out of 5 stars

6108 FG Pins for driveshaft 4x22mm
Genuine FG spare/option part. Contents:4 pieces

€12.90*

Average rating of 0 out of 5 stars

FG Sportsline 4WD-510 with Mini Cooper body HT-Edition
The first 1/5 touring and sports car designed as a 4WD from the ground up. With a wheelbase of 510mm the 4WD chassis is suitable for the FG Mini Cooper and the FG Porsche GT3 RSR bodies. Equipped with a strong 26 cm³ engine, tuning pipe, tank with quick acting closure, 2 differential gears, front disk brake and a lot more. However, the highlight is still the well-known FG 4WD. Maximum traction, easy handling and grip during cornering as well, these are the advantages only a 4WD model can offer.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.The 4WD Sportsline chassis opens up a new era within the Touring and Sportscar class of large scale model cars. Main target was the development of a chassis with supreme driving dynamics and ultimate performance. Maximum traction as well as easy handling, sufficient grip in curves, only a fourwheel powered model offers all these advantages. With the new 4WD Sportsline series FG Modellsport once again sets a trend at 1:5 scale.The 4WD Sportsline chassis for the Mini Cooper is delivered with a wheelbase of 510mm. The fourwheel drive is carried out over an almost wear resistant tooth belt. 2 differential gears, tank with snap closure and a powerful engine with Tuning pipe turn the Sportsline 4WD chassis into a high-class 1:5 scale model with outstanding driving characteristics.You can choose this 4WD model with painted Mini Cooper bodyshell , 2.4 GHz radio control system, servos, batteries in our configurator. Team decals are not included in the delivery content and have to be ordered separately.The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problems. A tank filling enables you to run your model around 45 minutes. Equipment and technical description of the 4WD Sportsline Mini Cooper:Solid 4mm chassis made of high-quality aluminium low-wear belt drive splash-proved 2 differential gears double wishbones at front and rear axle toe-in, castor and wheel camber adjustable at the axles - rear FG ball drive all steel driving components hardened all rotating parts ball-beared servo relieving servo saver front disk brake rear gear brake with big brake disk 700ccm fuel tank with snap closure oil-pressure shock absorbers with volume control and spring adjusting ring 26 cm³ combustion engine with Tuning pipe fabric hollow chamber tires with inserts receiver box and battery holder optional painted polycarbonate bodyshell with decals and with the RTR version the 2.4 GHz pistol grip radio control system with steering and gas servo.Dimensions: Length: 780 mm Width: 405 mm Height: 250 mm Wheelbase: 510 mm HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURTouring cars in action!Painting tips:

From €1,389.95*

Average rating of 0 out of 5 stars

6029/08 FG Ball-and-socket joint for M8
Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M8 thread rods. Replacement for the plastic ball-and-socket joints 6029/01.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

Average rating of 0 out of 5 stars

y1309 All steel linkage for steering servo/servo saver application
Genuine HT spare/option part.Very strong linkage with M6 steel ball joints.M6 threaded rod with lock nuts, balls with holes for M4 screws.Maximum length about 96 mm, but through cutting the M6 rod allows for a minimum length of 48 mm.Significantly stronger than the standard plastic version, and especially recommend when using the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP servo, this linkage can be used with "normal" servos as well.The threaded rod is not designed as a turnbuckle for a reason because there is not need to change the adjusted length for this application after installation. The setting accuracy of 0.5 mm (½ turn) means a maximum difference to the ideal length of 0.25 mm. This is always sufficient, the trim on the transmitter handles the final adjustment.On the other hand, a connecting rod with the same thread on both ends will always keep its setting when installed, even when both lock nuts are not tightened against the ball joints. Therefore reliability is higher.Set includes:2 x steel ball joints M62 x flat lock nuts1 x M6 x 60 mm threaded piece for Losi 5ive-T1 x M6 x 80 mm threaded piece for Losi 5ive-T 2.02 x spacer tubesContents:1 piece

€27.90*

Average rating of 0 out of 5 stars

y1335/01 Replacement clips for Suspension limiter Set
Genuine HT spare/option part. Replacement clips for Suspension limiter no.: Clips with 1,5 mm, 2 mm und 3 mm size included in the set. The clips fit shock shafts up to 4.5 mm diameter. Suitable for the following shock : y1137 GPM - Spezial Cross shocks (all versions) 2011 Mecatech Big Bore Shocks y1193 Mecatech Klick-Shocks, externally adjustable FG 6083/6084 shocks front / rear 66291/66292/66293 alloy shocks 08 67320/67330 alloy shocks for Leopard 2WD/4WD 7202/7203/7204 alloy shocks 04 305029/305030 shocks Comanche / Attack Evo 32488 Carson 1/5 front shocks 32574 Carson 1/5 rear shocks Cad shocks (all versions ) Package includes:6 clips 1.5 mm thick 6 clips 2 mm thick6 clips 3 mm thick

€8.20*

Average rating of 0 out of 5 stars

6732/05 FG E-clip spring steel 5 mm
Genuine FG spare/option part. Fits FG + Carson 6 mm a-arm hinge pins and 8 mm front wheel shafts.Part is delivered in silver or black color from vendor!Content:15 pieces

€2.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Theme Development