Mielke 5543 Power Gearshift clutch for FG (except Formula 1+Evo2020), Harm and RS5, carbon, 2,4mm springs with long clutch carrier

€129.50*

Prices incl. VAT plus shipping costs

Available

Product number: mielke_5543

EAN: 4058575113508

Product information "Mielke 5543 Power Gearshift clutch for FG (except Formula 1+Evo2020), Harm and RS5, carbon, 2,4mm springs with long clutch carrier"

The new adjustable system features three carbon pads with special 2.4 mm springs.
Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.

Adjustable friction points:

First gear - 8.500 U/min.
Second gear - 9.300 U/min.
Third gear - 10.100 U/min.
Fourth gear - 11.000 U/min.

With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

5441/01 Mielke Clutch carrier for 5441

Genuine Mielke spare/option part. Contents:1 piece

€39.90*

Details

5441/02 Mielke Front cover for 5441

Genuine Mielke spare/option part. Contents:1 piece

€39.90*

Mielke 5445 Power Gearshift clutch adjustement tool

Adjustment tool for Mielke Power Gearshift clutches #5440 and #5441.

€19.90*

5445/1 Mielke tool for clamping of all Power-Gearshift clutches

Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece

€34.90*

Mielke 5449 Carbon clutch pads single, 3 pcs.

Genuine Mielke spare/option part.Spare parts for Mielke clutch´s no.: 5442, 5440, 5441.Contents:3 pieces

€44.90*

Mielke 5447/01 Springs 2,4 mm made from special steel

Genuine Mielke spare/option part. Replacement part for Mielke Power Gearshift clutches #5440 and #5441.Content:3 pieces

€9.90*

Similar products

Mielke 5445 Power Gearshift clutch adjustement tool

Adjustment tool for Mielke Power Gearshift clutches #5440 and #5441.

€19.90*

Mielke 5443 Power Gearshift clutch for FG (except Formula 1+Evo2020), Smartech, Harm, Losi and HPI, carbon pads, 2,3mm springs

The new adjustable system features three carbon pads with special 2.3 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.

€129.50*

5445/1 Mielke tool for clamping of all Power-Gearshift clutches

Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece

€34.90*

Mielke 5441 Power Gearshift clutch for FG (except Formula 1+Evo2020), Smartech, Harm, Losi /HPI, Mix, 2,3mm springs with long clutch carrier

The new adjustable system features two aluminum and one carbon pad with special 2.3 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.For RS5 models from version T14!

€129.50*

Mielke 5741 Power Gearshift clutch for FG (not for Formel 1+Evo2020) Harm, RS5, HPI, Losi, 2,0mm springs, Mix with long clutch carrier

Genuine Mielke spare/option part. For offroad vehicles, less Grip or rain use.The new adjustable system features two aluminum and one carbon pad with special 2.0 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm. Contents:1 piece

€129.50*

Mielke 5743 Power Gearshift clutch for FG (not for Formel 1+Evo2020) Harm, RS5, HPI and Losi, Carbon, 2mm springs with long clutch carrier

Genuine Mielke spare/option part. For offroad vehicles, less Grip or rain use.The new adjustable system features three carbon pads with special 2.0 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm. Contents:1 piece

€129.50*

Mielke 5541 Power Gearshift clutch for FG (except Formula 1+Evo2020), Harm, RS5, Mix, 2,4mm springs with long clutch carrier

The new adjustable system features two aluminum and one carbon pad with special 2.4 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.For RS5 models from version T14!

€129.50*

Customers also viewed

y1436 SPEED TEC CRANK Ignition-System (CIS)

y1436 Tools: y1436/01 Assembly wrench+ 29.9EUR

New ignition system for RC Car race engines with air baffles, special 62 mm balanced flywheel, modified ignition coil mount and special Löhin tuning ignition (#1361). For Zenoah G230/240/260/270/290/320 und CY / Fuelie / Losi engines.A much smaller and lighter flywheel, in conjunction with the special air baffles, ensures that the engine gets more cooling air then with previously available modified flywheels! The fan from the CIS-ignition with fins on both sides is about 30% lighter (!) than the stock version! Needless to say an engine equipped with such a flywheel revs considerably faster and significantly higher, of course. This in itself is nothing new, because modified flywheels, even though not 30% lighter, are pretty common on modified engines. However, the problem with these modified flywheels is maintaining sufficient cooling for the engine, which is absolutely mandatory for a reliably running engine! The 20% smaller in diameter flywheel is primarily responsible for the very substantial performance increase by the SPEED TEC CRANK ignition . The lower inertia, which is quite crucial for engine performance, allows for an extremely fast and higher revving engine! The air baffles of the CIS-ignition ensure that the path of the cooling air is matched to the reduced diameter of the CIS-fan wheel and the engine gets more cooling! As our product video shows, the stock engine gained near 2,000 rpm through installation of the SPEED TEC CIS-ignition ! But perhaps the optimized torque is even more convincing. This for 30% reduced and 20% more centrally positioned flywheel mass gives your engine a stunning power increase. Other benefits of SPEED TEC CIS - ignition system: Fits all Zenoah, as well as HPI, Losi-, CY 1/5 & 1/6 engines (incl. Zenoah G320) No modifications to the cylinder or the ignition coil mount required! No assembly of the flywheel, thus 100% exact fit and running true The enclosed Löhin ignition system is designed for speeds up to 25,000 rpm! The baffles protect the flywheel from debris (stones, etc.) Complete with Löhin ignition and all necessary parts in a nice special bag Easy installation: Remove the stock ignition system - install the CIS-ignition - done! The color of the ignition cable and the spark plug cap may vary.

Variants from €329.00*

€358.90*

Details

LOSB5039 Losi Clutch Shoes & Spring, 8,000 RPM. 5T, Mini, DBXL+MTXL

Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Contents:1 pieces

€69.99*

5851 Mielke Power Gearshift II Converse clutch for FG, Harm SX3, RS5, Losi, HPI Carbon with 2mm springs, long clutch carrier

Genuine Mielke spare/option part. Fits for FG, Losi, HPI.For onroad vehicles, less Grip or rain use.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece

€129.50*

5646/3 Mielke Mix linings "NEW" for Power Gearshift Converse II clutch

Neue Mielke Mix Beläge für die Gearshift 2 Kupplung (die Blaue).3 Stück2 x Beläge in Aluminium1 x Kupplungsbelag in Aluminium mit eingesetzem Carbonteil.Dieses Carbonteil ist notwenig um die Kupplungsglocke sauber von Aluminiumabrieb zu halten.

€54.90*

Mielke 5447 Springs 2,3 mm made from special steel

Genuine Mielke spare/option part. Replacement part for Mielke Power Gearshift clutches #5440 and #5441.Contents:3 pieces

€9.90*

y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch

With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 139.90

€149.90*

Details

4415/06 FG Clutch spring

Genuine FG spare/option part. Contents:3 pieces

€4.30*