LOS45026 Losi Wheel & Beadlock Set, white, 5ive-T 2.0
€49.99
Available
Product information "LOS45026 Losi Wheel & Beadlock Set, white, 5ive-T 2.0"
Contents:
- 2 pieces
Login
Customers also bought
Genuine HT spare/option part. The spool replaces the center differential and keeps the speed of both output shafts the same. As a result, especially the acceleration of the vehicle is significantly increased.The spool is nicely made of high-quality burnished steel and very strong. Its total length is the same as a normal differential housing with gasket. The gasket is no longer used with the spool. The driving pin of the front output shaft is secured by an O-ring. The screws for the connection with the spur gear are secured with nylock nuts. This eliminates the need for waiting for the curing of a thread locking compound and makes the removal of screws with damaged head much less critical.The spool would physically fit front and rear applications as well; however, its use here makes no sense to driving dynamics.Scope of delivery:Spool2 x Driving pin 4 x 20 mmO-ring4 x Steel nylock nut M4
Customers also viewed
CNC-machined from 6061-T6 aluminum front chassis braces by Area RC for MCD RR5/XS5. The set includes front chassis brace, front top plate and steering post brace; it stiffens the front chassis section and improves steering precision.
Extremely flexible 6-piece body shell for Losi 5ive-T, with complete installation hardware.Made of thermoplastic elastomer (TPE), an extremely strong plastic which combines thermoplastic and elastomeric properties! Color black (the decals pictured are not included!). The elastoplastic body set fits the stock Losi 5ive-T roll cage precisely and is almost "unbreakable"! Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells.Of course, the extreme deformability of the elastoplastic body shell, compared to the stock version, is a huge advantage.And there's more with the elastoplastic body shell:Better dirt protection for the 5ive-T through partially closed wheel wells front and rear.Front and rear fenders with large cut-outs prevent contact with the tires.Integrated window nets allow for improved airflow and better engine cooling.The textured surface of the elastoplastic body shell is largely soil-resisting.Please note: This feature also makes the use of highly specialised adhesives for any kind of decals unavoidable if you want them to stay. All decals shown in the pictures for presentation are of the standard version!Even though the elastoplastic body shell is much tougher than the stock Losi 5ive-T body, the weight increase only very moderate from 902 grams to 971 grams. The body shell is a 6-piece design for best flexibility possible.Contents:1 x hood/front fender2 x side panels1 x roof2 x rear fenders1 x complete installation hardware
Genuine Top Tuning spare/option part.Light yet strong version due to reinforcement ribs.Contents:1 piece
Genuine Losispare/option part. Mechanical brake for retrofitting in an electric powered Losi 5ive-B or 5ive-T 2.0. An additional servo and a 3-channel remote control are required.If you run the maximum operating voltage approved for an ESC, there is a risk - especially in large scale cars - that under certain circumstances the reverse currents generated by the motor when braking will destroy the esc.For this reason, we recommend using a mechanical brake (as with gas powered vehicles).Please note that Reverse is no longer possible with this configuration!In the ESC settings, you must select the Forward/Brake operating mode. The brake by the controller must be deactivated or set to the lowest possible value. For this job a program card suitable for the ESC is usually required!Set includes: TLR252011 TLR Brake Disc, Pad and Screw Set 5ive-B LOSB3230 Losi Brake Cams & Bushings 5T, TLR 5ive-B and Mini LOSB5901 Losi Throttle/Brake Linkage Set 5T, TLR 5ive-B and Mini Servo mount for throttle / brake servoLosi Servo HS901T Contents:1 set
Genuine HT spare/option part.These heavy duty differential drive cups for the center differential in a Losi 5ive-T/2.0/B or MINI WRC are made of 300M / Böhler V132 steel and are characterized not only by high hardness, but also simultaneously toughness. The service life is therefore much higher than for the stock cups. Replaces stock parts LOSB3214 and TLR252008.300M steel is used in motorsport and aviation for high strength parts. As a highly pure material, it is significantly more expensive than conventional steels, its high basic strength and toughness make the machining a time-consuming task.The 300M steel center diff drive cup has the same dimensions as the stock part.Contents:2 pieces of 300M steel HD differential drive cup, center diff application2 pieces of 4x18 drive pins
Genuine Losi spare/option part. Inclusive mounting screws.Contents:2 pieces
Genuine Losi spare/option part. Gear table:Gears:Ratio:Slug:LOSB5046 18 Teeth pinion / 18 to 6211,39LOSB5804 Engine MountLOSB5044 19 Teeth pinion / 19 to 6210,79LOSB5803 Engine MountLOSB5045 20 Teeth pinion / 20 to 6210,25LOSB5805 Engine MountThe 62T spur gear is also very helpful with brushless conversions, creating more space between motor and center diff. This allows the use of smaller pinions for all those, who are not into top speed only.Contents:1 piece