TT1013 Top Tuning Shock tower front, Losi 5ive-T/2.0/ Mini and TLR 5ive-B

The new TT0900 electric starter is pre-assembled and fits a wide range of models including the Losi 5ive-T, 5ive Mini and DBXL, most FG models, HPI-Baja / Wild Attack series etc. The TT0900 electric starter can be started with the remote control (free channel required!). The new TT0900electric starter has much more power than the previous Electric starter thanks to the brushless motor and higher voltage. The popular Zenoah G320 is no longer a problem. It also no longer uses a one-way bearing, which clearly increases reliability. Also the installation space has been noticeably reduced by the motor and a planetary gearbox.The starter components to be fitted weigh about 666 grams plus the battery.For mounting the starter, the flywheel on the engine is replaced by the version with spring-loaded pawls included in the delivery. The tools required for this, piston stopper and flywheel puller, are also included in the delivery.For the 3rd channel the transmitter should have a switch with two positions (momentary switch preferred) or a controller. An additional channel is required for a remote engine killswitch. A killswitch is included in the scope of delivery, but a real fail-safe module such as TT0990 offers higher safety. A possibly already existing failsafe module can also be used.Due to the splitting of the functions engine start and engine stop on two channels, no more compatibility problems with different remote controls are to be expected, only the availability of free channels matters.A 3S LiPo battery is required as the power source.In the shops options menu, we offer a special battery with a more compact design (5,600 mAh/30C, 110 x 49 x 34 mm) which makes installation usually easier in many cars, as well as a battery with standard dimensions (3,900 mAh/60C, 135 x 45 x 25 mm). Of course, other 3S batteries can also be used at your own discretion, but the load capacity (capacity x C-rate) should be on a similar or higher level.Please note that we cannot ship batteries to countries outside the European Union!Since the starter unit can be mounted vertically or horizontally and the brushless starter motor is very small, almost all air filters and most tuned pipe systems can be used.Notes regarding necessary modifications known to us for mounting the starter depending on the vehicle: FG 4wd onroad Rear r/h plastic body mount, depending on position, slightly modified or relocated FG 2wd onroad horizontal engine No modifications Mecatech FW01 No modifications FG 4wd Buggy sportsline Depending on the body shell, minor trimming is required. FG 2wd Buggy current chassis Depending on the body shell, minor trimming is required. FG 2wd Marder (old chassis) Starter fits without modifications to the chassis plate. However, the body shell has to be cut out a bit more seriously in the area of the starter. A repositioning of the rear r/h body mount is recommended. FG Monster Cut the r/h side panel slightly and add a flat area to the aluminum tube which supports the panel on the engine Losi 5ive-B Depending on the tuned pipe, mount starter with motor on top or on the l/h side. Losi 5ive-B Mount the starter motor on the l/h side, space for the tuned pipe is very tight and must be tested in each individual case. No problems when using the stock muffler box. Losi DBXL Depending on the tuned pipe, mount starter with motor on top or on the l/h side. If the starter motor is to be mounted on the side, one screw of the motor roll cage must be replaced by a CSH screw. Carson C5 Only with Zenoah or CY engine, not with Smartech PT engine (different hole pattern on engine)! Carson C6 With the C6, depending on the body shell, trimming is required. HPI 5B/T Depending on the body shell, minor trimming is required. Carson Wild GP Attack Depending on the body shell, minor trimming is required. The accommodation of the engine killswitch, controller unit and wiring harness must be carried out at your own discretion. User Manual FG 4WD On-Road FG Monster FG 2WD On-Road horizontal engine FG 2WD/4WD Buggy current chassis Losi 5ive-T Losi DBXL FG 2WD Marder (old chassis)

Genuine Top Tuning spare/option part. All aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 150 mm long und 50 mm wide. The battery tray accepts batteries up to 164 mm long, but the motor pinion limits the max. length of one battery to 155 mm.Rear motor clamps: - Diameter 55,75 mm z.b. for Losi Spektrum 780 kV - Diameter 57 mm z.B. for Tenshock oder Castle- Diameter 57,8 mm z.B. for Leopard Baureihe 58- Diameter 60 mm z.B. for Lehner- Diameter 70 mm z.B. for BP70120 ZTW Beast Brushless Motor 620 kV Please note: This set does not include Motor or ESCThis conversion kit is not intended for the 5ive-T 2.0, even though the installation in this vehicle would be feasible with some modifications (drilling and thread tapping required). The version for the 5ive-T 2.0 you can find here: TT1024. Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding ! Contents:Motor mount with your choice of rear clamp for 57 / 57.8 / 60 / 70 mm motor diameterBattery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop tapes4 hook-and-loop tapes to secure the batteriesaluminum mounting pedestals for the battery plate16T pinion with 8 mm bore diameterMounting screws

Genuine TopTuning spare/option part.Rear chassis brace by TopTuning, made of high-strength 7075 aluminum; fits the new racing Buggy TLR/Losi 5ive-B only.The shape of the TLR 5ive-B rear brace with its much steeper angle compared to the 5ive-T and Mini makes the use of aluminum for this application particularly interesting. The standard plastic part cannot provide the desired dimensional stability in the long run. The material strength and temperature resistance of aluminum offer a significant advantage.Inclusive two mounting screw M5 x 14 mm.Contents:1 piece

Genuine Top Tuning spare/option part.TT1001 Top Tuning Aluminum front a-arms Losi 5ive-B and Mini:Losi 5ive-B and Mini front a-arms made by Top Tuning, machined from high grade 7075-T6 aluminum, with replaceable bushings. Made in Germany. These a-arms are designed to work with the stock aluminum guide bushings (LOSB2074), which also serve to hold the C-hubs in the a-arms. The screws in the C-Hubs can therefore be tightened as usual, without binding the assembly. The supplied shims allow the adjustment of the longitudinal play to the tolerances of C-Hubs from different manufacturers. The a-arms are identical for l/h and r/h side. All necessary hardware included. Set of 2 top quality a-arms. Contents:2 x 7075 aluminum front a-arm2 x set screw M8 x 252 x low height nut M82 x socket head screw M5 x 252 x socket head screw M4 x 204 x shim 9 x 15 x 0.52 x shim 9 x 15 x 0.2TT1002 Top Tuning Aluminum rear a-arms Losi 5ive-B and Mini:Genuine Top Tuning spare/option part.Losi 5ive-B and Mini rear a-arms made by Top Tuning, machined from high grade 7075-T6 aluminum, with replaceable bushings. Made in Germany. The a-arms are identical for l/h and r/h side. Contents:2 x 7075 aluminum rear a-arm2 x set screw M8 x 252 x low height nut M82 x socket head screw M5 x 252 x socket head screw M4 x 20

Genuine Top Tuning spare/option part.Losi 5ive-B and Mini rear a-arms made by Top Tuning, machined from high grade 7075-T6 aluminum, with replaceable bushings. Made in Germany. The a-arms are identical for l/h and r/h side. Contents:2 x 7075 aluminum rear a-arm2 x set screw M8 x 252 x low height nut M82 x socket head screw M5 x 252 x socket head screw M4 x 20

Genuine Top Tuning spare/option part.Losi 5ive-B and Mini front a-arms made by Top Tuning, machined from high grade 7075-T6 aluminum, with replaceable bushings. Made in Germany. These a-arms are designed to work with the stock aluminum guide bushings (LOSB2074), which also serve to hold the C-hubs in the a-arms. The screws in the C-Hubs can therefore be tightened as usual, without binding the assembly. The supplied shims allow the adjustment of the longitudinal play to the tolerances of C-Hubs from different manufacturers. The a-arms are identical for l/h and r/h side. All necessary hardware included. Set of 2 top quality a-arms. Contents:2 x 7075 aluminum front a-arm2 x set screw M8 x 252 x low height nut M82 x socket head screw M5 x 252 x socket head screw M4 x 204 x shim 9 x 15 x 0.52 x shim 9 x 15 x 0.2

Complete set with all required installation parts!50% more power than aZenoah G320 engine! Spektrum Firma® 160 Amp Brushless SMART ESC The ESC is waterproof, completely programmable, and comes pre-wired with a high-current IC5 connector. The ESC will work with most sensorless brushless motors and is Li-Po and Ni-MH compatible. The SMART technology provides information like battery voltage, RPM, RX pack Voltage, and Speed directly from the ESC when used with the Spektrum Dashboard app. 50+ MPH Spektrum Firma 4-Pole 780Kv Brushless Motor The brushless ESC and motor provide wicked power with an 8s LiPo battery (not included) that will blaze speeds of 50+ MPH. Perfect option for 1/5th scale models looking to run a 8S Lipo powered setup. Featuring a low cog 4-pole 8-magnet rotor design, CNC machined aluminum housing with heat sinking fins, insulated high purity copper windings, high-quality alloy steel 8mm output shaft, and high-precision bearings for high durability and smooth rotation. Preinstalled with 6.5mm gold plated bullet connectors. Perfectly matched to the Firma 160 Smart ESC. FAST, POWERFUL M4 PROCESSOR The Firma ESCs' 32-bit M4 processor produces higher resolution signal input and more accurate motor output. TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B and MiniAll aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 150 mm long und 50 mm wide. The battery tray accepts batteries up to 164 mm long, but the motor pinion limits the max. length of one battery to 155 mm.This conversion kit is for the Losi 5iveT/B and Mini. The conversion kit for the Losi 5ive-T 2.0 has the order number TT5014 Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding adapter cables! Contents: SPMXSM1100 Spektrum Firma 780Kv Brushless Motor SPMXSE1160 Spektrum Firma 160 Amp Brushless Smart ESC 3S-8S Motor mount with your choice of rear clamp Battery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop bands 4 hook-and-loop bands to secure the batteries aluminum mounting pedestals for the battery plate 17T pinion with 8 mm bore diameter Mounting screws

Genuine Top Tuning spare/option part.Spare bushings for the inner side of front and rear Top Tuning 5ive-B aluminum a-arms TT1001/TT1002.Contents:4 pieces

Genuine Top Tuning spare/option part. All aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 164 mm long und 50 mm wide. Rear motor clamps:Diameter 55,75 mm i.e. for Losi Spektrum 780 kV Diameter 57 mm i.e. for Tenshock or CastleDiameter 57,8 mm i.e. for Leopard 58 lineDiameter 60 mm i.e. for LehnerDiameter 70 mm i.e. for BP70120 ZTW Beast Brushless engine 620 kVPlease note: This set does not include Motor or ESCThis conversion kit is for the 5ive-T 2.0 only. It even allows for running the big BP70120 ZTW Beast Brushless motor in combination with mechanical brakes! The center diff will be turned around between its mounting pillars for installation. Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding ! Contents:Motor mount with your choice of rear clamp for 57 / 57.8 / 60 / 70 mm motor diameterBattery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop bands4 hook-and-loop bands to secure the batteriesaluminum mounting pedestals for the battery plate17T pinion with 8 mm bore diameterMounting screws

Genuine Top Tuning spare/option part.Spare bushings for the outer side of front Top Tuning 5ive-B aluminum a-arms TT1001.Contents:4 pieces

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B, 5ive-T and Mini WRC.Contents:1 piece

Genuine Losi spare/option part. Contents:1 set

Go BIG wherever you bash with the 1/6 scale Losi® Super Rock Rey® AVC® 4WD! This ready-to-run gives any driver the power and stability to succeed off the beaten path and to dominate the desert with impressive size, speed, and endurance.The Super Rock Rey® takes its inspiration from full-scale rigs that tackle the King of Hammers and similar places others wont dare go. Realistic solid axle performance joins 6S brushless power that pushes the needle to 50+ mph or more while the stability of AVC® technology lets you hold nothing back through corners and jumps.Over rough terrain, slick surfaces, and loose dirt, youll have full-throttle freedom no matter how the environment fights back. Dependable Spektrum DSMR® technology delivers precise control. Through it all, the bottom-loading battery enables fast pack changes without body removal.The large tires and new front end geometry increase suspension travel and improve performance over any terrain. Super Rock Rey loves rocky off-road tracks, and the rougher, the better! It also rips through sand, mud, water, and most any other surface condition with a new roll cage and body work creating the dirt-spitting image of 1:1 desert racing, rock crawling, off-road action.Impressive 1/6 scale size and exceptional scale looks.55+ mph speed potential to outperform the competition.Supports up to 6S LiPo battery power out of the box.AVC® Active Vehicle Control system to provide the right amount of stability for any driver.4WD independent front suspension with solid axle 4-link rear adds realism and improves performance over any terrain.4mm aluminum chassis with injection-molded roll cage provides superior durability and scale looks.Larger wheels and tires increase ground clearance to avoid hang-ups.LED light bars provide scale looks when the sun goes down.All-metal gear drivetrain increases durability.Preset motor plate provides easy, precise gear mesh.Coil-over, oil-filled shocks keep the ride smooth and plush.750Kv Dynamite® Brushless Motor and Dynamite Fuze 160A Brushless ESC are capable of 6S up to 8S power and 50+ mph speeds.Waterproof electronics withstand racing over wet and muddy tracks.Spektrum DX2E Active 2.4GHz Radio SystemLarge-scale, metal gear Spektrum steering servo withstands punishing action.Multi-piece body and driver interior maximize scale realism.Bottom-loading battery makes pack changes quick and easy, with the capacity to hold up to 6S packs.Ball Bearings: Full Ball BearingsChassis: 4mm Plate, 6061-T6 AluminumCompletion Level: Ready-To-RunDifferential: Fluid Filled, Bevel GearGear Pitch: 1.5 ModuleGround Clearance: 3.0 in (76.2 mm)Internal Gear Ratio: 4.88:1Motor Type: Non-Sensored BrushlessRadio: Spektrum DX2E Active, 2 ch DSMR with AVCShock Type: Oil-Filled, Coil-Over SpringsSuspension: Independent Front/4-Link RearVehicle Type: Off-Road Rock Racing BuggyWater-Resistant: YesDimensions:Motor Size: 56 x 87 mmLength: 27.0 in (685.8 mm)Weight: 20.6 lb (9.3 kg) without batteriesWheel Diameter: 3.2 in (81.3 mm)Wheel Width: 2.1 in (53.3 mm)Wheelbase: 20.0 in (508.0 mm)Width: 17.25 in (438.1 mm)Front Track: 17.25 in (438.1 mm)Rear Track: 16.5 in (419.1 mm)Height: 11.0 in (279.4 mm)Tire Diameter: 7.0 in (177.8 mm) Long Travel 4-link Live Rear Axle The Super Rock Reys rear suspension allows it to soak up massive whoops and bumps with the same realistic handling and movement of a full-scale desert truck. You get better control and a more locked-in feel regardless of the terrain. Long Travel Independent A-Arm Front Suspension The front, independent A-Arm suspension has been carefully engineered letting the Super Rock Rey rip across the terrain with confidence. By having fully independent suspension, it allows each side to react accordingly providing more control and more precise steering and handling. Coil-Over Oil Filled Shocks with Pre-Load adjustment The long-travel shocks do a fantastic job of soaking up the energy from big bumps and jumps. They also feature threaded shock bodies with adjustment collars so you can fine tune the pre-load settings of the coil-over springs. External bump stops provide plush landings on the hardest surfaces. 55+ MPH Dynamite Fuze 1/6th 750Kv Brushless Motor and 160A ESC The vehicle comes equipped with a Dynamite® Fuze 750Kv brushless motor and a waterproof 160A ESC. This potent combination can handle 8S LiPo batteries (sold separately) and will allow you to hurtle across the landscape at speeds of up to 55+ mph. Full Bodied Roll Cage Just like the 1:1 desert trucks, the Super Rock Rey® truck comes with a super-rigid roll cage made of super-tough composite material that enhances the trucks scale looks and durability. It is integrated with the 4mm hard-anodized aluminum chassis plate providing the ultimate protection for your truck and electronics. True-to-Scale Body Panels The two piece bolt-on body panels give the buggy an authentic factory look. These panels are polycarbonate for incredible durability and rugged good looks. Aluminum Chassis The foundation of the Super Rock Rey consists of a 4mm, hard-anodized aluminum chassis plate with a 4mm upper deck. For added durability and performance its integrated with a realistic roll cage made of super-tough composite material. Whether you are hitting the whoops, getting huge air, or just wide open, the 4mm chassis just keeps asking for more! 4X4 Driveline with Adjustable Differentials Full-time four-wheel drive provides amazing traction. Additionally the front, center and rear differentials can be tuned allowing adjustment of the power bleed between the front and rear drivetrain. The power bleeds evenly front-to-rear and the truck will drive out of the turns harder from point to point. The tunable differentials allow you to dial in your truck for maximum performance and traction. LED Light Bars (Front) The fun doesnt stop even when the sun goes down with the Super Rock Rey. Brilliant LEDs on the two front-mounted integrated light bar cast more than enough illumination for running at night. Plus, the roll cage-mounted LEDs place only a small demand on the battery allowing you to stay out all night! LED Light Bars (Rear) Just as important as the front lights, the red rear lights allow you to gauge the orientation of the buggy even in the darkest night. Large Scale Servo The robust Spektrum S904 waterproof digital servo is designed to handle whatever you can throw at it. Monstrous torque delivers the most intense Super Rock Rey® experience possible. Bottom-Loading-Batterie To help withstand the trials and tribulations of off-road driving, the Super Rock Rey incorporates our innovative bottom loading battery system, which allows you to change the batteries without removing the body. Quickly and easily make battery changes without removing the body or wrestling with battery straps. Full-Size Spare Tire Blow out a tire out on the flats? No worries. The fully-functional spare tire not only adds an authentic scale look to the Super Rock Rey®, but serves as a true spare. Easily add the tire and get back to tackling the terrain. Scale Fox Shox Looking just like their full-scale counterparts, the Fox Shox reservoirs add to the incredible scale realism of the Super Rock Rey. Scale Fire Extinguisher The Super Rock Rey features several scale details rarely included. Attached to the outside, the scale fire extinguisher is at the ready and adds to the realism of this desert racer. Scale Rear View Mirrors Scale rear view mirrors on the Super Rock Reys doors include high-end details like mirror-like chrome inserts. You can actually see your reflection! Scale Window Netting Rubberized safety window netting looks and feels like the full-scale counterparts real netting. Everywhere you look, the Super Rock Reys scale details set it apart from the competition. Fully Detailed Driver Figures The Super Rock Rey also has a molded interior that includes a driver and co-driver, both of which sport racing helmet and harness details. Suspension Limiting Straps Fully-functional suspension limiting straps look and act just like their real-world counterparts. A buckle allows drivers to adjust the length of the strap. Scale Appearing Rotors and Calipers Mounted separately, the authentic looking rotors and calipers add to the incredible scale appearance and keep the realism alive as the Super Rock Rey races over rough terrain. Authentic MAXXIS Creeper Crawler Tires True-to-scale tires look incredible, increase ground clearance to avoid hang-ups, and allow drivers to hit the ground running. Licensed Trim Schemes Licensed Raceline Wheels and Baja Designs trim schemes complete the scale details of the Super Rock Rey. These trim schemes will have racers doing double takes as they take on all comers. Spektrum DX2E Active Radio System The Spektrum DX2e Active radio system offers advanced features like AVC control, a 3-position throttle limiting switch and travel adjust. It also has an expansion port that lets you add the Spektrum Speedometer or a Bluetooth module and phone mount to utilize the Spektrum Dashboard app. The Full-Throttle Freedom of AVC® Technology The receiver"s built-in AVC® (Active Vehicle Control®) system works behind the scenes, making hundreds of throttle and steering adjustments per second, so more of the motor"s power is translated into ballistic speed and acceleration instead of just flying dirt. The patent-pending AVC system adds a level of performance that simply cannot be found with any vehicle from any manufacturer other than Horizon Hobby. Like traction control in your full-scale vehicle, you can activate or deactivate the system on the fly and adjust the level of stability based on driving conditions. Any RC vehicle can go fast and with AVC you can go faster while maintaining optimum stability in all driving conditions. It is still needed:Charger

Genuine Losi spare/option part. Contents:1 piece

Fits Losi 5ive-T and 5ive Mini.Content:1 pieces

Very nicely machined front shock tower from GPM, made of high grade 7075-T6 aluminum. The increased thickness of the upper section makes bending or breaking almost impossible. Cleverly positioned cutouts keep the weight down and make for a pleasing appearance.Direct replacement for the stock part using OEM hardware.Content:1 piece