7475 FG Alloy ball-and-socket joint for 1:5 Truck

€45.75*

Prices incl. VAT plus shipping costs

Available

Product number: fg_7475

EAN: 3410564518618

Product information "7475 FG Alloy ball-and-socket joint for 1:5 Truck"

Genuine FG spare/option part.

Alloy ball-and-socket joints with surface coating, 70% less weight.

Contents:

10x 7475/01
4x 7475/02
2x 7475/03
2x 7475/04

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

6475 FG Alloy balls for 1:6 models - 14pcs.

Alloy balls for ball joints with surface coating, 70% less weight, easy-running and resistant to wear.8 pcs. 10 x 15 mm, 5 mm bore2 pcs. 10 x 13 mm, 5 mm bore4 pcs. 10 x 10.75 mm, 4 mm bore

€42.95*

Accessories / Spare parts

7475/01 FG Alloy ball-and-socket joint Ø5/10x15mm - 2pcs.

Alloy ball-and-socket joints with surface coating, 70% less weight.

€6.50*

7475/03 FG Alloy ball-and-socket joint Ø10x9,5mm - 2pcs.

Alloy ball-and-socket joints with surface coating, 70% less weight.Bore diameter 4 mm

€5.90*

7475/04 FG Alloy ball-and-socket joint Ø10x13mm - 2pcs.

Alloy ball-and-socket joints with surface coating, 70% less weight.Bore diameter 5 mm

€5.90*

7475/06 FG Aluminium joint ball with covering disc Ø4/10 x 15,5 mm

Genuine FG spare/option part. Joint ball for the plastic joints of the track rods of all FG models. The plastic joints are subject to wear after longer use or use under dusty conditions. The clearance between ball and joint increases, a re-adjustment of the joint is no longer sufficient. In case of a crash it is possible that the joint jumps off. This joint ball prevents a jumping off of the plastic joint.Content:1 piece

€5.90*

Similar products

7474 FG Alloy gear plate 97 for 2WD and 4WD

Genuine FG spare/option part. Suitable for all FG 1:5 and 1:6 2WD and 4WD models. Best fitting of ball bearing seat and distance of gear shaft, non-twisting. To mount this gear plate into the models Marder, Beetle, Beetle On-Road, Pajero and Monster the rear brake 7040/01 is needed.Bearing seatsClutch bell: 22 x 6 mmLayshaft: 19 x 7 mmContent:1 piece

€99.90*

7750 FG small module 1,25 transmission set, steel

Small steel modul (1,25) transmission set for Sportsline and Challenge Line, improves performance and reliability.

€119.90*

7706 FG Cylinder gasket for Zenoah G240, G270, G290 and 4-Bolt Chung Yang

Genuine FG spare/option part.Applications:Click here!The gasket have a thickness from 0,40 mm. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€5.40*

8014 FG Body mount, side, rear, for Alfa Romeo, Calibra and GTR

Genuine FG spare/option part. Contents:2 pieces

€13.90*

7573 FG Radio controll 2,4 GHz FG-RS3 incl. receiver

Genuine FG spare/option part. Wheel / trigger type transmitter with ergonomic designRubber coated non-slip wheelLarge LCD display for easy settings10 model memoriesFHSS ModulationFailsafeDual rate on channels 1, 2 and 3Trims on the 3 channelsLow voltage (9,5V)7573/01 FG receiver 2,4 GHz fpr FG-RS3Contents:1 piece

€75.90*

8012 FG Body mount middle

Genuine FG spare/option part. Contents:2 pieces

€9.90*

7573/01 FG Receiver 2,4 GHz for FG-RS3

Genuine FG spare/option part. Contents:1 piece

€42.90*

8017 FG Brake rod set for 1:5

For touring cars and Leopard. With 2 mm thick and 440 mm in the lenght

€9.90*

8018 FG Throttle rod set for Zenoah 1:5

For touring car. With 2 mm thick and 350 mm in the lenght.

€9.50*

7800 FG Zenoah G290RC with Walbro carburetor WT 990

Same dimensions as the Zenoah G230, G240, G260, G270.New generation Zenoah engine with 28,5cm³ cylinder capacity and approx. 3.9 hp. The cylinder is fixed with 4 screws. The technical details are identical to the Zenoah engines G240RC and G270RC.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€284.90*

7909/01 FG Program card

Genuine FG spare/option part. Small and light program card for mobile use to change or adjust parameters of brushless control FG order number: 7909 fast and clearly. Supply 2S-6S Li-Po (7.4 22V)BEC 6V/3ADimensions: 55 x 48 x 38 mmWeight: 185gContents:1 piece

€32.90*

7497/01 FG Rear brake 2WD/4WD

Genuine FG spare/option part. The set will shipped without gear carrier plate. Contents:1 set

€55.90*