9472 FG Ball driving set for GT1, F1, Buggy and Trucks

€138.50*

Available

Product number: fg_9472

EAN: 3410564524879

Product information "9472 FG Ball driving set for GT1, F1, Buggy and Trucks"

Genuine FG spare/option part.

Suitable for the FG GT1 models with a width of 420mm, f.e. CLK-GTR, Porsche GT1, GT2, GT3, for the Formula 1 and all 1:6 Buggy and Monster models.

For rear axle only! 4WD cars must use GPM ball drive set GPM66275 for the front.

For Marder and Beetle models until Nov'03 the raised uprights 6077 bzw. 6478 are needed.

Content:

1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y1218 Springs for drive shafts

Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

4412 FG Driveshaft boots

Genuine FG spare/option part. Suitable for all FG models and other. To complete one car you need two sets.For 2WD models you need two sets and for 4WD models you need four sets.Contents:2 pieces

€19.90*

Details

6069/02 FG Differential drive cups for ball drive - 1pce.

Genuine FG spare/option part. Spare part for FG ball drive.Dimensions:Shaft:Diameter: 8 mmLength: 27 mmSpline drive: for FG bevel gearsCup:Diameter: 18,5 mmLength: 18 mmContents:1 piece

€35.00*

6079/01 FG Rear axle shaft for ball drive

Genuine FG spare/option part. For ball drive system only!Diameter: 8 mm.Contents:1 piece

€33.90*

Details

6080/01 FG Ball drive shaft rear 96,5 mm

Genuine FG spare/option part. Same applications as 6080, just for ball drive system!Dimensions:Shaft diameter: 6,5 mmBall diameter: 12 mmLength: 96,5 mmContents:1 piece

€21.90*

7080/02 FG Balls for ball driveshaft, 5 mm

Genuine FG spare/option part.Replacement balls for ball driveshaft.Contents:six pieces

€4.90*

7080/03 FG Distance disk - 4pcs.

Rubber pad, fits inside of ball drive cups.Diameter 10.7 mmThickness 1.6 mm

€3.60*

Details

Alternatives

GPM 9472 Ball drive conversion kit for FG Marder, Off-Road, Beetle, Monster/Stadium, Formula 1 and Truck cars

Fits all FG offroad (like Marder, Off-Road Buggy, Beetle) / monster and stadium models (except Leopard 2010 up). Also for FG Formula 1 and Race Truck models.The ball drive conversion kit for FG touring cars and gt-models you will find here: GPM 9471. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.The GPM ball drive set includes everything for a conversion of the respective FG car. Set includes:Quantity:DescriptionPart number2 piecesBall drive wheel shaftGPM 6079/012 piecesDifferential ball drive cupGPM 6069/022 piecesBall drive shaft 96,5 mmGPM 6080/014 piecesDrive shaft booty100412 piecesSteel ballGPM 7080/024 piecesDrive shaft spacer springy1218

€149.90*

Similar products

9540/32 Hydraulic Oil 50 ml

Genuine FG spare/option part. Contents:1 piece

Content: 50 Milliliter (€190.00* / 1000 Milliliter)

€9.50*

Details

9466/04 FG Carburator gasket, 2pcs.

Item N° 09466/04 Carburator gasket, 2pcs.Replacement part for

€5.50*

9538/23 FG Dust seal, 1 pce.

Item N° 9538/23 Dust seal, 1 pcs.Replacement part for twin piston hydraulic brake.

€3.30*

Details

9540/06 FG Piston seal ring

Genuine FG spare/option part. Suitable for hydraulic brakes with the order number 09540 and 09541.Contents:2 pieces

€4.90*

9466/05 FG Foam filter insert, 2 pcs.

For the new fg airbox no. 9466 and no. 9467

€17.90*

Details

9468 FG Airbox 2011 without choke, set

Item N° 9468 Airbox 2011 without choke, setLight and very solid air box, high air permeability for more engine power. Without choke.Suitable for all Zenoah engines in 1:5 touring cars and 1:6 race trucks. DMC legal ( No. DMC 5 - 093 ).The set includes: Air filter adapter, air box, foam filter, gaskets and installation hardware.

€86.90*

9540/21 O-ring

Genuine FG spare/option part. Content:1 piece

€3.30*

Details

9467 FG Airbox 09 with choke, set.

Light and very solid air box, high air permeability for more engine power. With choke for the Zenoah engines G240RC and G270RC in 1:5 touring cars and 1:6 race trucks. DMC legal ( No. DMC 5 - 093 ).The set includes: Air filter adapter, air box, foam filter, gaskets and installation hardware.

€79.99*

9468/07 FG O-Ring f. Airbox, Ø 58 x 2, 2pcs.

Item N° 9468/07 O-Ring f. Airbox, Ø 58 x 2, 2pcs.Spare part for 9468

€5.90*

9473 FG Ball drive set for Leopard 2WD/4WD Sportsline, set

Item N° 9473Ball drive set for Leopard Sportsline, setFits for 2WD/4WD Sportsline.Not suitable for front application on 4WD cars!

€138.50*

9540/22 FG Gasket

Genuine FG spare/option part. Contents:1 piece

€7.90*

9538/09 FG Brake rotors, 2 pcs.

Item N° 9538/09Brake rotors, 2 pcs.Replacement part for MecaTech twin piston hydraulic brake.Measures:Diameter 64 mmThickness 1.9 mm18 mm square

€37.80*

Customers also viewed

08.20.13 OSKART Pilot Boots

Genuine OSKART Pilot Boots spare/option part.Fits 1/2 scale OSKART.Contents:1 pair

€145.00*

68411 FG Front lower alloy wishbones 4WD

Genuine FG spare/option part. Set contents front lower wishbones, rose joints, screws.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR; on-road cars with 510 mm wheelbase only, i.e. 4WD Porsche and Mini.Contents:2 pieces

€134.50*

6080 FG Rear dogbone

Genuine FG spare/option part. Replacement drive shaft (dogbone). Long Version.Suitable for BMW GTR, Mercedes CLK-GTR, Race-Trucks, C291, Porsche GT1, GT2, GT3 and all FG Off-Road models.Dimensions:Shaft diameter: 7 mmBall diameter: 10 mmLength: 101,5 mmContents:1 piece

€19.00*

9473 FG Ball drive set for Leopard 2WD/4WD Sportsline, set

Item N° 9473Ball drive set for Leopard Sportsline, setFits for 2WD/4WD Sportsline.Not suitable for front application on 4WD cars!

€138.50*

7497/01 FG Rear brake 2WD/4WD

Genuine FG spare/option part. The set will shipped without gear carrier plate. Contents:1 set

€55.90*

FG Formula 1 Sportsline

Completely mounted, with a 26 cm³ combustion engine and final speed of almost 100 km per hour, what else would you want?A further additional improvement is the installed front disk brake. A clear polycarbonate bodyshell is included.Quality and high-class equipment to a sensible price.Technical description of the Formula 1 Sportsline chassis:The undercarriage of the FG Formula 1 is built on a high-strength 5 mm alloy chassis. All chassis borings (screws) are countersunk. The front and rear axle with their various adjusting possibilities as king pin angle, trailing effect etc. consist of double delta wishbones. The double delta wishbones of the rear axle are supported by additional track rods which enable you a very fast set-up. All adjustments can be made without a dismounting of parts according to the fixed wishbone threaded rods with right-/left-handed thread.The model is equipped with 4 alloy oil-pressure shock absorbers. The push-rod suspension ensures the transmission between single wheel suspension and shock absorber.We deliver this chassis with a powerful 26 cc combustion engine. The engine's power is transmitted over a four-block Teflon clutch on a synchronous belt drive. This synchronous belt drive is also designed for a higher driving power. The BBS wheels and the tires are copies of the big models. All rotating parts are supported by ball bearings.The construction of the Formula 1 chassis is not identical with the other 1:5 scale FG models such as Merc. C-Class, Race Truck a.s.o. and therefore it can?t be converted into or from these models by a conversion kit.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 960 mmWidth: 440 mmHeight: 230 mmWheelbase: 620 mmFormular 1 models in action!

€1,279.00*

Configure now

10259 FG Body detail kit F1

Genuine FG spare/option part.Contents:1 set

€15.00*