Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

9471 FG Ball driving set for 1:5 392-402mm

Product information "9471 FG Ball driving set for 1:5 392-402mm"

Suitable for the FG Touring and Sports car models with a width from 392mm up to 402mm, f.e. BMW M3 GTR, Chrysler Viper, Honda Accord, Ferrari 360 GT, Mercedes CLK-DTM, McLaren GTR, Opel V8 DTM or Peugeot 406.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

GPM 9471 Ball drive conversion kit for FG and Mecatech touring cars and gt-models
FG Set price: 130,20 EURFits all FG touring cars, GT-models and Mecatech FW01.The ball drive conversion kit for FG marder, Off-Road Buggy, beetle, monster / stadium, formula 1 and truck models you will find under GPM 9472. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.The GPM ball drive set includes everything for a conversion of the respective FG/Mecatech cars. Set includes:Quantity:DescriptionPart number2 piecesBall drive wheel shaftGPM 6079/012 piecesDifferential ball drive cupGPM 6069/022 piecesBall drive shaft 91 mmGPM 7081/014 piecesDrive shaft booty100412 piecesSteel ballGPM 7080/024 piecesDrive shaft spacer springy1218

€149.90*

Accessories / Spare parts

Average rating of 0 out of 5 stars

y1218 Springs for drive shafts
Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

Average rating of 0 out of 5 stars

4412 FG Driveshaft boots
Genuine FG spare/option part. Suitable for all FG models and other. To complete one car you need two sets.For 2WD models you need two sets and for 4WD models you need four sets.Contents:2 pieces

€19.90*

Average rating of 0 out of 5 stars

6069/02 FG Differential drive cups for ball drive - 1pce.
Genuine FG spare/option part. Spare part for FG ball drive.Dimensions:Shaft:Diameter: 8 mmLength: 27 mmSpline drive: for FG bevel gearsCup:Diameter: 18,5 mmLength: 18 mmContents:1 piece

€35.00*

Average rating of 0 out of 5 stars

6079/01 FG Rear axle shaft for ball drive
Genuine FG spare/option part. For ball drive system only!Diameter: 8 mm.Contents:1 piece

€33.90*

Average rating of 0 out of 5 stars

7081/01 FG Driveshaft for ball drive, 91 mm
Genuine FG spare/option part. Replacement ball driveshaft, medium versionSuitable for BMW M3 GTR, Mercedes C-Class DTM 04, Mercedes CLK-DTM, McLaren GT, Honda Accord, Dogde Viper, Opel V8 and Porsche Carrera GT.Shaft diameter: 6,5mmBall diameter: 12mmLength: 91mmContents:1 piece

€25.00*

Average rating of 0 out of 5 stars

7080/02 FG Balls for ball driveshaft, 5 mm
Genuine FG spare/option part.Replacement balls for ball driveshaft.Contents:six pieces

€4.90*

Average rating of 0 out of 5 stars

7080/03 FG Distance disk - 4pcs.
Rubber pad, fits inside of ball drive cups.Diameter 10.7 mmThickness 1.6 mm

€3.60*

Similar products

Average rating of 0 out of 5 stars

9540/32 Hydraulic Oil 50 ml
Genuine FG spare/option part. Contents:1 piece

Content: 50 Milliliter (€190.00* / 1000 Milliliter)

€9.50*

Average rating of 0 out of 5 stars

9466/04 FG Carburator gasket, 2pcs.
Item N° 09466/04 Carburator gasket, 2pcs.Replacement part for

€5.50*

Average rating of 0 out of 5 stars

9538/23 FG Dust seal, 1 pce.
Item N° 9538/23 Dust seal, 1 pcs.Replacement part for twin piston hydraulic brake.

€3.30*

Average rating of 0 out of 5 stars

9540/06 FG Piston seal ring
Genuine FG spare/option part. Suitable for hydraulic brakes with the order number 09540 and 09541.Contents:2 pieces

€4.90*

Average rating of 0 out of 5 stars

9468 FG Airbox 2011 without choke, set
Item N° 9468 Airbox 2011 without choke, setLight and very solid air box, high air permeability for more engine power. Without choke.Suitable for all Zenoah engines in 1:5 touring cars and 1:6 race trucks. DMC legal ( No. DMC 5 - 093 ).The set includes: Air filter adapter, air box, foam filter, gaskets and installation hardware.

€86.90*

Average rating of 0 out of 5 stars

9466/05 FG Foam filter insert, 2 pcs.
For the new fg airbox no. 9466 and no. 9467

€17.90*

Average rating of 0 out of 5 stars

9540/21 O-ring
Genuine FG spare/option part. Content:1 piece

€3.30*

Average rating of 0 out of 5 stars

9540/22 FG Gasket
Genuine FG spare/option part. Contents:1 piece

€7.90*

Average rating of 0 out of 5 stars

9467 FG Airbox 09 with choke, set.
Light and very solid air box, high air permeability for more engine power. With choke for the Zenoah engines G240RC and G270RC in 1:5 touring cars and 1:6 race trucks. DMC legal ( No. DMC 5 - 093 ).The set includes: Air filter adapter, air box, foam filter, gaskets and installation hardware.

€79.99*

Average rating of 0 out of 5 stars

9472 FG Ball driving set for GT1, F1, Buggy and Trucks
Genuine FG spare/option part.Suitable for the FG GT1 models with a width of 420mm, f.e. CLK-GTR, Porsche GT1, GT2, GT3, for the Formula 1 and all 1:6 Buggy and Monster models. For rear axle only! 4WD cars must use GPM ball drive set GPM66275 for the front.For Marder and Beetle models until Nov'03 the raised uprights 6077 bzw. 6478 are needed.Content:1 set

€138.50*

Average rating of 0 out of 5 stars

9468/07 FG O-Ring f. Airbox, Ø 58 x 2, 2pcs.
Item N° 9468/07 O-Ring f. Airbox, Ø 58 x 2, 2pcs.Spare part for 9468

€5.90*

Average rating of 0 out of 5 stars

9473 FG Ball drive set for Leopard 2WD/4WD Sportsline, set
Item N° 9473Ball drive set for Leopard Sportsline, setFits for 2WD/4WD Sportsline.Not suitable for front application on 4WD cars!

€138.50*

Customers also viewed

Average rating of 0 out of 5 stars

GPM 9471 Ball drive conversion kit for FG and Mecatech touring cars and gt-models
FG Set price: 130,20 EURFits all FG touring cars, GT-models and Mecatech FW01.The ball drive conversion kit for FG marder, Off-Road Buggy, beetle, monster / stadium, formula 1 and truck models you will find under GPM 9472. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.The GPM ball drive set includes everything for a conversion of the respective FG/Mecatech cars. Set includes:Quantity:DescriptionPart number2 piecesBall drive wheel shaftGPM 6079/012 piecesDifferential ball drive cupGPM 6069/022 piecesBall drive shaft 91 mmGPM 7081/014 piecesDrive shaft booty100412 piecesSteel ballGPM 7080/024 piecesDrive shaft spacer springy1218

€149.90*

Average rating of 0 out of 5 stars

9472 FG Ball driving set for GT1, F1, Buggy and Trucks
Genuine FG spare/option part.Suitable for the FG GT1 models with a width of 420mm, f.e. CLK-GTR, Porsche GT1, GT2, GT3, for the Formula 1 and all 1:6 Buggy and Monster models. For rear axle only! 4WD cars must use GPM ball drive set GPM66275 for the front.For Marder and Beetle models until Nov'03 the raised uprights 6077 bzw. 6478 are needed.Content:1 set

€138.50*

Average rating of 0 out of 5 stars

6038 FG Engine mount washers for M4 and M4 screws
Genuine FG spare/option part. Washers for the screws (M4 / M5) that hold the engine mounts to the chassis. Suitable for all FG models.Dimensions:Outside diameter: 15 mmInside diameter: 6 mmContents:4 pieces

€6.50*

Average rating of 0 out of 5 stars

9470 FG Ball driving set for 1:5 390 mm
Genuine FG spare/option part. Contents:1 set

€129.95*

Average rating of 0 out of 5 stars

y1419 Sintered steel clutch for Zenoah and many other engines from 23 cm³ to 32 cm³
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!

€19.00*

Average rating of 0 out of 5 stars

GPM 7081/01 Ball driveshaft for 91 mm FG and Mecatech cars, 1 pce.
Fits all FG and Mecatech touring cars and gt-models. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins. The GPM ball drives can be partially mixed with FG parts. The heads of the GPM driveshafts fit into FG differential cups or wheel shafts.The opposite combination, i.e. FG shafts in GPM differential cups or wheel shafts does not always fit. We had tests where some FG shafts fit neatly, but due to slight tolerances others who did not fit into the very same cups/shafts. For this combination, we can not guarantee compatibility! Dimensions: Length 91 mm

From €19.80*

Average rating of 0 out of 5 stars

8140/01 FG Alloy plate for front axle, 1 pce.
Genuine FG spare/option part.

€12.70*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency