EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Go to homepage
Quick shipping until 14 o'clock
PartScout
€0.00*
Quick shipping until 14 o'clock

7081/01 FG Driveshaft for ball drive, 91 mm

€21.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_7081_01
EAN: 3410564514740

Product information "7081/01 FG Driveshaft for ball drive, 91 mm"

Genuine FG spare/option part.

Replacement ball driveshaft, medium version

Suitable for BMW M3 GTR, Mercedes C-Class DTM 04, Mercedes CLK-DTM, McLaren GT, Honda Accord, Dogde Viper, Opel V8 and Porsche Carrera GT.

Shaft diameter: 6,5mm
Ball diameter: 12mm
Length: 91mm

Contents:
  • 1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Accessories / Spare parts

y1218 Springs for drive shafts
y1218 Springs for drive shafts
Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*
GPM 7081/01 Ball driveshaft for 91 mm FG and Mecatech cars, 1 pce.
GPM 7081/01 Ball driveshaft for 91 mm FG and Mecatech cars, 1 pce.
Fits all FG and Mecatech touring cars and gt-models. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins. The GPM ball drives can be partially mixed with FG parts. The heads of the GPM driveshafts fit into FG differential cups or wheel shafts.The opposite combination, i.e. FG shafts in GPM differential cups or wheel shafts does not always fit. We had tests where some FG shafts fit neatly, but due to slight tolerances others who did not fit into the very same cups/shafts. For this combination, we can not guarantee compatibility! Dimensions: Length 91 mm

From €19.80*
Details
GPM 9471 Ball drive conversion kit for FG and Mecatech touring cars and gt-models
GPM 9471 Ball drive conversion kit for FG and Mecatech touring cars and gt-models
FG Set price: 130,20 EURFits all FG touring cars, GT-models and Mecatech FW01.The ball drive conversion kit for FG marder, Off-Road Buggy, beetle, monster / stadium, formula 1 and truck models you will find under GPM 9472. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.The GPM ball drive set includes everything for a conversion of the respective FG/Mecatech cars. Set includes:Quantity:DescriptionPart number2 piecesBall drive wheel shaftGPM 6079/012 piecesDifferential ball drive cupGPM 6069/022 piecesBall drive shaft 91 mmGPM 7081/014 piecesDrive shaft booty100412 piecesSteel ballGPM 7080/024 piecesDrive shaft spacer springy1218

€149.90*

Alternatives

GPM 7081/01 Ball driveshaft for 91 mm FG and Mecatech cars, 1 pce.
GPM 7081/01 Ball driveshaft for 91 mm FG and Mecatech cars, 1 pce.
Fits all FG and Mecatech touring cars and gt-models. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins. The GPM ball drives can be partially mixed with FG parts. The heads of the GPM driveshafts fit into FG differential cups or wheel shafts.The opposite combination, i.e. FG shafts in GPM differential cups or wheel shafts does not always fit. We had tests where some FG shafts fit neatly, but due to slight tolerances others who did not fit into the very same cups/shafts. For this combination, we can not guarantee compatibility! Dimensions: Length 91 mm

From €19.80*
Details
GPM 9471 Ball drive conversion kit for FG and Mecatech touring cars and gt-models
GPM 9471 Ball drive conversion kit for FG and Mecatech touring cars and gt-models
FG Set price: 130,20 EURFits all FG touring cars, GT-models and Mecatech FW01.The ball drive conversion kit for FG marder, Off-Road Buggy, beetle, monster / stadium, formula 1 and truck models you will find under GPM 9472. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.The GPM ball drive set includes everything for a conversion of the respective FG/Mecatech cars. Set includes:Quantity:DescriptionPart number2 piecesBall drive wheel shaftGPM 6079/012 piecesDifferential ball drive cupGPM 6069/022 piecesBall drive shaft 91 mmGPM 7081/014 piecesDrive shaft booty100412 piecesSteel ballGPM 7080/024 piecesDrive shaft spacer springy1218

€149.90*

Customers also bought

7072/02 FG POM Adjustable rear lower wishone for 1:5
7072/02 FG POM Adjustable rear lower wishone for 1:5
Genuine FG spare/option part.Contents:1 piece

€51.60*
y19132 Taps for plastic
y19132 Taps for plastic
tool_0013 Thread size: y19132-6r M6 r/h
Genuine HT spare/option part. Taps for plastics, they do not cut the thread to its final diameter, thus leaving the thread self locking.Available in the sizes:M6 left and rightM7 left and rightM8 left and rightContents:1 piece

€8.40*
y1163 Aluminum differential case conversion kit for FG 2WD/4WD
y1163 Aluminum differential case conversion kit for FG 2WD/4WD
y1163 Version: y1163/02 for 4WD models
Genuine HT spare/option part.Alloy diff case conversion kit for FG 2WD cars and 4WD large scale cars, fits front or rear axle. You need two sets to do a complete car.Comes complete as shown with sealed bearings, installed needle bearings, shims, screws and o-rings.Please note:The differential comes unassembled, we recommend assembly tool #8505 for bevel gear installation.Contents:1 piece

€89.90*
7735 FG Isolator gasket for Zenoah
7735 FG Isolator gasket for Zenoah
Genuine FG spare/option part.Applications:Click here!Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€4.30*

Similar products

7088 FG Volume compensation for shock absorber
7088 FG Volume compensation for shock absorber
Genuine FG spare/option part. Ersatzteil zu:7083 FG Shock absorbers 97 short complete7200 FG alloy shock absorber 04 short7201 FG Alloy shock absorber 04 medium-short 7202 FG alloy shock absorber 04 medium-long 7203 FG alloy shock absorber 04 medium7204 FG alloy shock absorber 04 long Content:Two pieces

€4.70*
7052 FG Plastic gear wheel 42 teeth - 1pce.
7052 FG Plastic gear wheel 42 teeth - 1pce.
Gearwheel with 42 teeth for the layshaft. Diameter 66 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€15.75*
7058/01 FG Body screws Torx with stop nuts, 15 pieces
7058/01 FG Body screws Torx with stop nuts, 15 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Set includes:15 x Torx body screws M3 x 10 mm15 x Washers15 x M3 Hexagon nut

€6.90*
7092 FG Spring plate - 2pcs.
7092 FG Spring plate - 2pcs.
Spare part for , , , , and .Retainer diameter: 23 mmAccepts springs with approx. 16 mm inner diameterSlot for 4 mm shock shaft

€6.20*
7072/01 FG Adjustable rear lower wishone for 1:5
7072/01 FG Adjustable rear lower wishone for 1:5
Genuine FG spare/option part.Contents:1 piece

€19.90*
7039 FG Gear plate - 1pce.
7039 FG Gear plate - 1pce.
Also available in .Old version for brake with two small discs.

€19.80*
7080/02 FG Balls for ball driveshaft, 5 mm
7080/02 FG Balls for ball driveshaft, 5 mm
Genuine FG spare/option part.Replacement balls for ball driveshaft.Contents:six pieces

€4.90*
7080/04 FG Balance spring tapered, 4 pcs.
7080/04 FG Balance spring tapered, 4 pcs.
Item N° 7080/04Balance spring tapered, 4 pcs.

€5.90*
7072/03 FG Countersunk head screws M5x35 mm for rear lower wishbone, 4 pieces
7072/03 FG Countersunk head screws M5x35 mm for rear lower wishbone, 4 pieces
Genuine FG spare/option part.For installation of the rear lower a-arms, complete with washers and nuts.Part is delivered in silver or black color from vendor!Content:4 pieces

€2.20*
7050 FG Plastic gear carrier 52mm - 1pce.
7050 FG Plastic gear carrier 52mm - 1pce.
For 44T - 39T spur gears.Also available in alloy:

€13.90*
7088/01 FG Oil seal
7088/01 FG Oil seal
Genuine FG spare/option part. Content:4 pieces

€9.90*
7058 FG Body screws with stop nuts, 15 pieces
7058 FG Body screws with stop nuts, 15 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Set includes:15 x Allen head body screws M3 x 10 mm15 x Washers15 x M3 Hexagon nut

€6.60*

Customers also viewed

y0809 Klüber high performance grease for differentials
y0809 Klüber high performance grease for differentials
Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g

Content: 30 Gramm (€730.00* / 1000 Gramm)

€21.90*
7080/02 FG Balls for ball driveshaft, 5 mm
7080/02 FG Balls for ball driveshaft, 5 mm
Genuine FG spare/option part.Replacement balls for ball driveshaft.Contents:six pieces

€4.90*
GPM 9471 Ball drive conversion kit for FG and Mecatech touring cars and gt-models
GPM 9471 Ball drive conversion kit for FG and Mecatech touring cars and gt-models
FG Set price: 130,20 EURFits all FG touring cars, GT-models and Mecatech FW01.The ball drive conversion kit for FG marder, Off-Road Buggy, beetle, monster / stadium, formula 1 and truck models you will find under GPM 9472. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.The GPM ball drive set includes everything for a conversion of the respective FG/Mecatech cars. Set includes:Quantity:DescriptionPart number2 piecesBall drive wheel shaftGPM 6079/012 piecesDifferential ball drive cupGPM 6069/022 piecesBall drive shaft 91 mmGPM 7081/014 piecesDrive shaft booty100412 piecesSteel ballGPM 7080/024 piecesDrive shaft spacer springy1218

€149.90*
6079/01 FG Rear axle shaft for ball drive
6079/01 FG Rear axle shaft for ball drive
Genuine FG spare/option part. For ball drive system only!Diameter: 8 mm.Contents:1 piece

€33.90*
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency