9467 FG Airbox 09 with choke, set.
€79.99
Currently unavailable
Product information "9467 FG Airbox 09 with choke, set."
The set includes: Air filter adapter, air box, foam filter, gaskets and installation hardware.
Login
Accessories / Spare parts
Item N° 09466/04 Carburator gasket, 2pcs.Replacement part for
This air filter oil is designed for lubricating foam filters for on-road and off-road use. It reinforces the filters' efficiency for better carburation and retains dirt, mud and sand particles. Prevents water from penetrating into the filter.It is recommended to put the filter with a little bit oil in a small polybag and work it vigorously by hand. Excessive oil must be pressed out (don't wring the foam!) afterwards.For cleaning the filter please use the special foam cleaner y0523.The filter element must be dry before re-oiling.Content:50 ml
Content: 50 Milliliter (€119.00 / 1000 Milliliter)
Genuine Motul spare/option part. High-cling oil for foam cartridge air filters, especially for offroad and street use. The oil reinforces the the air filter'e efficiency and retains dirt, mud and sand particles, which will greatly extend the life of the engine. The blue tint makes it easier to control even oil application to the filter.Apply oil to filter generously and work the foam vigorously by hand to ensure complete oil penetration. Press foam slightly to remove excessive oil when done.Contents:1 piece / 400 ml
Content: 400 Milliliter (€47.25 / 1000 Milliliter)
Item N° 6565/29 Cable ties black 4,8x290mm - 25 pcs.Black cable clamps, indespensable to RC-car drivers for installation of batteries, receiver a.s.o.
Alternatives
Item N° 9469 Air box 2011 w. aluminium adapter w/o choke , setWe deliver this air box 2011 set with the cnc-manufactured aluminium adapter. Apart from that the equipment is identical with air box 2011 Item N°. 09468.
Genuine FG spare/option part. Complete set including airbox with reuseable foam filter element, billet aluminum venturi adapter with o-rings, filter oil and hardware.Version with o-ring "locks" for better sealing and easier assembly, new venturi adapter to reduce fuel consumption.AttentionThe venturi adapter can only be used on carbs without choke!Contents:1 set
Customers also bought
Genuine spare/option part.Protects chassis and body shell.Dimensions:Length: 334 mmWidth: 20 mmBore: 8 mmContents:2 pieces
Genuine FG spare/option part. Powerfull servo for 2WD and 4WD 1/5 and 1/6 cars. Ballraced, with metal gears.Technical data:Voltage : 6.0-7.4VSpeed : 0.14s-0.12s/60°Torque: 9-10kgcmDimensions : 40.8 x 20.1 x 38 mmWeight : 56 gContents:1 piece
Genuine FG spare/option part. Extreme light alloy gear wheel in anodizing quality with 24 teeth.Suitable for the gear wheels with 39, 40 and 41 teeth.Dimensions:Diameter: 38,7 mmBore: 10 mmTotal width: 18 mmTooth width: 11,5 mmModule: m=1,5Contents:1 piece
Genuine HT spare/option part. Fits all CY / Zenoah engines. Laser cutted stainless steel.The long design increases stiffness of the carburetor assembly significantly compared to the previous version. Comes with gasket and mounting bolt.Content:1 piece
Genuine GPM spare/option part. Full aluminum clutch shoes are very successfully used in 1/5 onroad racing applications.Therefore we can now offer the GPM conversion kit for BigScale Cross/Race clutches to full-aluminum clutch shoes. Made of a special alloy to suit this application the kit comes with 1.4 mm wire diameter springs and new spring pressure plates.Slight aluminum deposits in the clutch bell and corresponding wear marks in the clutch shoes are normal with the Big Scale ALLOY clutch and have no negative effect on the function. Caution: It is very important that when swapping the full-aluminum clutch shoes against the organic friction pads of a Big Scale CROSS or RACE to use a different or new , because the rough surface of the aluminum deposits in the clutch bell left by the Big Scale ALLOY will cause a high wear on the organic pads.y0730y0731Content:1 set
Adjustment tool for Mielke Power Gearshift clutches #5440 and #5441.
Customers also viewed
Item N° 9469 Air box 2011 w. aluminium adapter w/o choke , setWe deliver this air box 2011 set with the cnc-manufactured aluminium adapter. Apart from that the equipment is identical with air box 2011 Item N°. 09468.
Replacementpart for the FG airbox with the order no. 9468.
Item N° 9468 Airbox 2011 without choke, setLight and very solid air box, high air permeability for more engine power. Without choke.Suitable for all Zenoah engines in 1:5 touring cars and 1:6 race trucks. DMC legal ( No. DMC 5 - 093 ).The set includes: Air filter adapter, air box, foam filter, gaskets and installation hardware.
HT-airboxes, very small, low height design and low weight; but with a large (45 mm diameter) filter element. The boxes will fit on a FG car under a Porsche GT3 body and weighs even less than a FG Formula 1 airbox. The filter mounts directly above the carburetor and remains there, even when the box itself has been removed.The Evo-airbox has a higher flow rate, which is important for the high revving engines in onroad cars. Its diameter (100 mm) will usually allow an installation only in a few buggies with a vertically mounted engine, like Gas Devil / Titan / Helldevil.All parts available separately.
For the new fg airbox no. 9466 and no. 9467
Replacementpart for the new fg airbox without choke with the order no. 9466.
Ready for the ultimate Off-Road fun? Four-wheel drive combined with well-tried competition technology in an affordable beginner model. With the Sportsline Leopard 4 you purchase a premium RTR Racing Buggy manufactured of top-quality materials with the potential to win races - completely assembled and ready for racing.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Built on a 4mm aluminium chassis, closed belt drive, 2 differential gears, double wishbones at front and rear axle with many adjusting possibilities as well as large-volume oil-pressure shock absorbers for traction and optimal ground contact. The lateral splash-guard and the almost closed bodyshell prevent engine, servos a.s.o. from dirt. The model is equipped with a powerful 26 cm³ combustion engine with tuning pipe and ready oiled air-filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EUR The RTR version is delivered with assembled and preset 2.4 GHz radio control system and rechargeable batteries, either with painted or clear bodyshell. To complete the non-RTR version with clear bodyshell all popular servos and radio control systems are suitable.Dimensions:Length: 750 mmWidth: 470 mmHeight: 330 mmWheelbase: 534 mmThe video shows the FG-Marder in terrain!