Product information "9468 FG Airbox 2011 without choke, set"
Item N° 9468 Airbox 2011 without choke, set
Light and very solid air box, high air permeability for more engine power. Without choke. Suitable for all Zenoah engines in 1:5 touring cars and 1:6 race trucks. DMC legal ( No. DMC 5 - 093 ).
The set includes: Air filter adapter, air box, foam filter, gaskets and installation hardware.
0 of 0 reviews
Leave a review!
Share your experiences with other customers.
Login
No reviews found. Share your insights with others.
Fits Lauterbach airbox, mf-RaceLine airbox and the new FG airboxes with the numbers 9466 and 9467. Also for all other airboxes, where a filter with an inner diameter of about 35 mm is required (stretches up to 55 mm).
Genuine Motul spare/option part. High-cling oil for foam cartridge air filters, especially for offroad and street use. The oil reinforces the the air filter'e efficiency and retains dirt, mud and sand particles, which will greatly extend the life of the engine. The blue tint makes it easier to control even oil application to the filter.Apply oil to filter generously and work the foam vigorously by hand to ensure complete oil penetration. Press foam slightly to remove excessive oil when done.Contents:1 piece / 400 ml
This air filter oil is designed for lubricating foam filters for on-road and off-road use. It reinforces the filters' efficiency for better carburation and retains dirt, mud and sand particles. Prevents water from penetrating into the filter.It is recommended to put the filter with a little bit oil in a small polybag and work it vigorously by hand. Excessive oil must be pressed out (don't wring the foam!) afterwards.For cleaning the filter please use the special foam cleaner y0523.The filter element must be dry before re-oiling.Content:50 ml
GPM air filter cover which fits easily over your existing air filter. A rubber band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments. Fits all common filters, foam or fabric (K&N) style.
Lightscale N.R.G. is a high power, low noise and light weight air box system which fits all common known Touring car Models.Its power is the result of it?s big volume. Especially the area above the carburetor is optimized to guarantee the gas pillars `proper work. The alloy adapter is molded concave which has shown the best results in many years of testing, while extra venture systems reduce the volume and result in less maximum rpm.The Air Box outer part is made from robust fuel resistant plastic, which is impact resistant as well as flexible. This material is also part of the noise reduction system, ultra light weight without having to use fragile and expensive carbon fiber materials.The incoming air is filtered with a foam piece just in front of the air intake and therefore as far as possible positioned from the carburetor intake. This fact also assists the power development and offers perfectly filtered air as well as easy access for maintenance.As a result the use of Lightscales`N.R.G. Air box leads to a real gain of power and longer engine lifetime.The set includes the fully pre mounted air box with adapter and pre oiled filter foam
Item N° 9469 Air box 2011 w. aluminium adapter w/o choke , setWe deliver this air box 2011 set with the cnc-manufactured aluminium adapter. Apart from that the equipment is identical with air box 2011 Item N°. 09468.
Genuine FG spare/option part. Complete set including airbox with reuseable foam filter element, billet aluminum venturi adapter with o-rings, filter oil and hardware.Version with o-ring "locks" for better sealing and easier assembly, new venturi adapter to reduce fuel consumption.AttentionThe venturi adapter can only be used on carbs without choke!Contents:1 set
Light and very solid air box, high air permeability for more engine power. With choke for the Zenoah engines G240RC and G270RC in 1:5 touring cars and 1:6 race trucks. DMC legal ( No. DMC 5 - 093 ).The set includes: Air filter adapter, air box, foam filter, gaskets and installation hardware.
Same dimensions as the Zenoah G230, G240, G260, G270.New generation Zenoah engine with 28,5cm³ cylinder capacity and approx. 3.9 hp. The cylinder is fixed with 4 screws. The technical details are identical to the Zenoah engines G240RC and G270RC.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.
Item N° 9469 Air box 2011 w. aluminium adapter w/o choke , setWe deliver this air box 2011 set with the cnc-manufactured aluminium adapter. Apart from that the equipment is identical with air box 2011 Item N°. 09468.
Genuine Mielke spare/option part.The Carbon Air Booster No. 5250 has been specially developed for the tough race use! The complete air filter weighs 138 grams with all attachments and aluminum adapter, the carbon part alone weighs 66 grams.Nevertheless, an extreme stability has been achieved through the bulges in the mold. Furthermore, the design ensures a straight air flow in conjunction with the new air ducts. When using these ducts, the fresh air from the cooling opening is pressed directly into the air booster, increasing engine performance or reducing temperatures.Contents:1 piece
This reed valve system converts a normal piston-port engine into a reed valve engine. It offers the advantage of increased intake duration for a better charge for more power. As a positive side effect no fresh gas loss occurs during the downward movement of the piston because the membranes close this path.The reed valve block replaces the usual stock insulator. To use the advantage of the reed system, it is necessary to modify the piston skirt on the intake side. Depending on the engine it is advantageous for best results, to slightly match the cylinders intake port to the Epoxy insulator plate at the bottom of the reed valve system. Both steps are described in the installation instructions for Zenoah and Chung Yang engines. Our thanks for these instructions go to our customer Thomas Hoenicke.Note: For the time being the epoxy insulator plate must be slightly reworked to fit a G320 Zenoah engine. The manual has been written with the conversion of a G320, the affected area for modification is therefore shown.The unit is 24.5 mm high.
€79.90*
This website uses cookies to ensure the best experience possible. More information...