7478 FG Rear alloy upright lengthening

€52.40*

Prices incl. VAT plus shipping costs

Available

Product number: fg_7478

EAN: 3410564518670

Product information "7478 FG Rear alloy upright lengthening"

Genuine FG spare/option part.

The lengthening of the alloy uprights stiffen the negative inclination of the rear wheel.

Use only in connection with alloy uprights 6477 or 6478
Not recommended for installation in offroad cars.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

7706 FG Cylinder gasket for Zenoah G240, G270, G290 and 4-Bolt Chung Yang

Genuine FG spare/option part.Applications:Click here!The gasket have a thickness from 0,40 mm. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€5.40*

7750 FG small module 1,25 transmission set, steel

Small steel modul (1,25) transmission set for Sportsline and Challenge Line, improves performance and reliability.

€119.90*

Details

8012 FG Body mount middle

Genuine FG spare/option part. Contents:2 pieces

€9.90*

This product is currently not available.

8014 FG Body mount, side, rear, for Alfa Romeo, Calibra and GTR

Genuine FG spare/option part. Contents:2 pieces

€13.90*

7474 FG Alloy gear plate 97 for 2WD and 4WD

Genuine FG spare/option part. Suitable for all FG 1:5 and 1:6 2WD and 4WD models. Best fitting of ball bearing seat and distance of gear shaft, non-twisting. To mount this gear plate into the models Marder, Beetle, Beetle On-Road, Pajero and Monster the rear brake 7040/01 is needed.Bearing seatsClutch bell: 22 x 6 mmLayshaft: 19 x 7 mmContent:1 piece

€99.90*

7909/01 FG Program card

Genuine FG spare/option part. Small and light program card for mobile use to change or adjust parameters of brushless control FG order number: 7909 fast and clearly. Supply 2S-6S Li-Po (7.4 22V)BEC 6V/3ADimensions: 55 x 48 x 38 mmWeight: 185gContents:1 piece

€32.90*

8017 FG Brake rod set for 1:5

For touring cars and Leopard. With 2 mm thick and 440 mm in the lenght

€9.90*

7573/01 FG Receiver 2,4 GHz for FG-RS3

Genuine FG spare/option part. Contents:1 piece

€42.90*

7573 FG Radio controll 2,4 GHz FG-RS3 incl. receiver

Genuine FG spare/option part. Wheel / trigger type transmitter with ergonomic designRubber coated non-slip wheelLarge LCD display for easy settings10 model memoriesFHSS ModulationFailsafeDual rate on channels 1, 2 and 3Trims on the 3 channelsLow voltage (9,5V)7573/01 FG receiver 2,4 GHz fpr FG-RS3Contents:1 piece

€75.90*

7473/02 FG Engine flange for engine quick mount - 1 piece

Spare part for FG .Outer diameter engine flange 64 mm.

€43.90*

This product is currently not available.

7809 FG Piston ring for Zenoah G290

Genuine FG spare/option part.Spare part for Zenoah G290 engine.Dimensions:Thickness: 1 mmContents:1 piece

€19.90*

7855 FG Carburetor type: Walbro WT990

Genuine FG spare/option part. Standard carburetor for Zenoah G290.Typ: Walbro WT990.Contents:1 piece

€79.90*

Customers also viewed

4475 FG Rear alloy shock mount - 1pce.

Genuine FG spare/option part. Rear aluminum damper plate including screws.Replacement for plastic rear shock tower FG 7072/01.Content:2 pieces

€99.90*

6477/02 FG Rear alloy upright right

Genuine FG spare/option part.Spare part for 6477.Dimensions:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 20 mmContents:1 piece

€65.00*

LOS252058/01 Losi brushless motor mounting plate, black, DBXL-E / DBXL-E 2.0

Genuine Losi spare/option part. Aluminum brushless motor mounting plate, black, incl mounting screws for the motor.Size:Outer dimensions max. 40 x 46 x 10 mmContents:1 set

€29.90*

MadMax SUPER GRIP Soft 170x80/x60 for FG, Smartech, HPI, Losi, Arrma & Co.

SUPER GRIP 170 x 80 mm and 170 x 60 mm with black MadMax Extreme rims for 18 mm square or 24 mm hex wheel drive, 20 beadlock screws per rim and reinforced silver beadlock rings. Fits FG, Smartech, Losi 5ive-T, 5ive Mini, Desert Buggy XL and all HPI Baja 5B and 5T/SC cars.Due to the extreme stress created by the MadMax SUPER GRIP tires, the rim has been optimized again.The tires come with a special rigid insert which transfers the applied forces without tilting; even with the heaviest cars like the Losi 5ive-T.All together, the SUPER GRIP lives up to its name and provides maximum grip, which makes it necessary to use the supplied 3 mm beadlock screws for the MadMax EXTREME rims instead of the usual 2.5 mm screws. Additionally, the seating of these screws should be checked after each use.The MadMax SUPERGRIP tires have been designed especially for use on tarmac. Even on fine-pored tarmac your car will still find enough grip! (As you can see in our video.) On most 1/5 and 1/6 cars the best combination is the use of 60 mm wide front and 80 mm wide rear tires. The Losi 5ive-T and Super Baja Rey should run 60 mm wide MadMax SUPERGRIP tires all around, because the 80 mm wide SUPERGRIP tires are a bit too wide for the body shell.The 80 mm wide MadMax tires are reinforced on the inside of the carcass with a special cross pattern in the tread section and ribs in the outside shoulder.The MadMax SUPERGRIP has a special on-road tread. These tires have excellent grip even after eating up the tread and can be used after that for a long time as slicks!MadMax SUPERGRIP spare rubber can be found here: MadMax SUPER GRIP spare part Some off-road tires knowledge can be found here!

€109.90* €129.90* (15.4% saved)

Configure now

y1034 HT Aluminum front suspension for FG Off-Road Buggy 2WD, set

The sets include complete front bulkheads A + B with brace, upper (adjustable) and lower a-arms and shock tower.Please note: the hinge pins are not included, you will use the pins from the stock suspension!The sets include:Item N°Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1028HT Aluminum front bulkhead A for 2WDy1030HT Aluminum front bulkhead B for 2WDy1036HT rose joints with conical spacersy1029HT aluminum droop stopsy1035HT Aluminum shock tower Off-Road Buggy 2WDy1031HT Aluminum bulkhead brace for 2WDUnit prices: 387,10 EURFits FG Off-Road Buggy 2WD.This front suspension can be used on a FG Monster Beetl 2WD as well, however some new holes must be drilled into the shock tower for this application.

€339.00* €387.10* (12.43% saved)

LOS252020 Universal Rebuild Kit (2): 1:5 4wd DBXL+MTXL

Genuine Losi spare/option part.Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!Contents:1 set

€11.99*

6477/03 FG Upright pin 4 mm

Genuine FG spare/option part.Spare part for 6477. Dimensions:Length 19 mmDiameter: 4 mmContents:2 pieces

€6.30*