y19047/01 Alloy shock pistons for buggy shocks

€26.30*

Available

Product number: daempfer_0004

EAN: 4058575010340

Product information "y19047/01 Alloy shock pistons for buggy shocks"

Genuine HT spare/option part.

O-ring piston for the red FG buggy shocks for optimum shock performance.

These pistons cause almost no wear to the shock body. Because of this we recommend a break-in period of a couple of gas tanks for the shocks with the original piston to smoothen the body's surface. Then swap the pistons for the new o-ring piston. Doing so will give you the best results possible.

Fits standard piston rods! Of course, piston rods are not included.

Contents:

4 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y19047/02 O-rings for y19047

Genuine HT spare/option part. Replacement o-rings for aluminum shock pistons no. y19047.Contents:4 pieces

€3.90*

Details

Similar products

7088 FG Volume compensation for shock absorber

Genuine FG spare/option part. Ersatzteil zu:7083 FG Shock absorbers 97 short complete7200 FG alloy shock absorber 04 short7201 FG Alloy shock absorber 04 medium-short 7202 FG alloy shock absorber 04 medium-long 7203 FG alloy shock absorber 04 medium7204 FG alloy shock absorber 04 long Content:Two pieces

€4.70*

7201/05 FG Guiding set

Suitable for shocks with the FG order number: 7200, 7201, 7202, 7203, 7204.Dimensions (with flange):Inner diameter 4 mmOuter diameter 6 mmFlange diameter 8 mmWidth 2,5 mmDimensions (without flange):Outer diameter 7,7 mmWidth 1,6 mmContents:8 bushings with flange2 bushings without flange

€6.90*

7093 FG Silicone o-ring - 12pcs.

Inner diameter 4 mmThickness 2 mm

€6.90*

67330/02 FG Threaded piston rod Ø4,5 x 95mm Leopard 2WD/4WD

Genuine FG spare/option part. Spare part for the FG Leopard 2WD/4WD 2010 version.Content:1 piece

€13.90*

7087/02 FG Lower shock retaining long - 2pcs.

Spare part for , , , , , , , , and .

€4.50*

7087/01 FG Lower shock retaining short - 2pcs.

Spare part for , , and .

€4.30*

67320/13 FG Sealring Ø4,5mm Leopard 2WD/4WD, 2pcs.

Item N° 67320/13 Sealring Ø4,5mm Leopard 2WD/4WD, 2pcs.Spare part for the Leopard 2WD/4WD 2010 version

€10.90*

67320/10 FG Plastic shock piston Leopard 2WD/4WD

Genuine FG spare/option part. Spare part for the Leopard 2WD/4WD 2010 versionContents:2 pieces

€7.90*

66291/05, FG Shock shaft end, 35 mm long, 4WD

Genuine FG spare/option part.Contents:2 pieces

€5.90*

67320/09 FG Volume compensation Ø20mm Leopard 2WD/4WD, 4pcs.

Item N° 67320/09 Volume compensation Ø20mm Leopard 2WD/4WD, 4pcs.Spare part for the Leopard 2WD/4WD 2010 version

€5.40*

6093 FG Shock seal kit

Genuine FG spare/option part. Spare part for 6083 and 6084. Includes 4 each o-rings 4x2 mm and 13x2 mm. Contents:4 pieces

€5.90*

y7087/02 Alloy shock shaft end long

Genuine HT spare/option part.Replaces FG 7087/02.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. There are replaceable bushings.Dimensions:Length overall: 27 mm, about 22 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 pieces

€15.90*

Customers also viewed

10008 FG Formula 1 Competition 1/5

This model is fitted with numerous aluminium parts: front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Just like all other FG Competition models the FG Formula 1 Competition is the most successful model of the past years. The experiences we gained from numerous competitions have all influenced this version. The FG gearwheel drive which is extremely smooth running and cares for more power reserves. Surely FG Modellsport has created a competitive model for the next years with this version which will seamlessly follow up on the past successes. Highlights Alloy wishbones FG gearwheel drive Alloy rear axle plate FG alloy shock absorbers 04 Ball-bearing alloy servo saver 26 ccm Zenoah-Engine Airbox Tuned pipe Front- and rear brake 5 mm Chassis Lexan body shell Technical description of the FG Formula 1 Competition ki:The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with tuning bowden cable brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition kitCNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, mechanical Tuning brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.We deliver the models as a kit including mounting instruction. The body parts are made of clear polycarbonate for your own painting. FG stickers and writings are enclosed.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos (each approx. 40 - 50 kg), 2 servo for throttle brake (approx. 20 - 30 kg), batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engine Clear bodyshell and polycarbonate spoiler Mechanical brakesDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!

€2,499.95*

Configure now

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set

Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all, necessary for installation, accessories (see also our pictures)One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline and E (in connection with alloy front uprights y0932Dimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €289.90*

Details

4466 FG Rose joint for alloy wishbone

Suitable for , , , , , , , , , , and Elcon Monster-Truck front axle.A = 5 mmB = 6 mmC = 8 mmD = 13 mmContent:2 pieces

€51.90*

7089 FG Shock piston

Genuine FG spare/option part.Spare part for 7083, 7200, 7201, 7202, 7203, 7204.Dimensions:Outer diameter: 13.3 mmInner diameter: 4 mmContents:2 piece

€4.30*

67320/10 FG Plastic shock piston Leopard 2WD/4WD

Genuine FG spare/option part. Spare part for the Leopard 2WD/4WD 2010 versionContents:2 pieces

€7.90*