66244/01 FG Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs.
€6.50
Available
Product information "66244/01 FG Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs."
Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs.
Spare part for the Leopard 2010 2WD/4WD version
0 of 0 reviews
Average rating of 0 out of 5 stars
Login
Alternatives
Steel ball joint 4 mm thread, 3 mm bore in ball, for servo saver/servo linkage.This version is for servo linkage.Sets available:One each with r/h and l/h thread
Steel ball joint 4 mm r/h, 3 mm bore in ball, for servo saver/servo linkage.This version is for servo linkage.Sets available:One x r/h thread
Steel ball joint 4 mm l/h thread, 3 mm bore in ball, for servo saver/servo linkage.This version is for servo linkage.Sets available:One x l/h thread
Customers also bought
Genuine FG spare/option part. Bore 3 mm.Contents:4 pieces
Genuine FG spare/option part.Dimensions:6 x 8 x 7,5 mmContents:6 pieces
Item N° 67542Steering rods M4 x 83mm, 2pcs.Spare part for Sportsline Leopard 4WD.
These adjusting clips allow a faster adjustment of the wishbones. Suitable for front and rear suspension. The set contains 16 adjusting clips in 2 and 6mm size for 6 mm axles.
Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 100 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 100 ml:FG Item N° 66295/010 = Viscosity: 100 FG Item N° 66295/025 = Viscosity: 250FG Item N° 66295/035 = Viscosity: 350FG Item N° 66295/050 = Viscosity: 500FG Item N° 66295/075 = Viscosity: 750FG Item N° 66295/100 = Viscosity: 1000FG Item N° 66295/150 = Viscosity: 1500FG Item N° 66295/200 = Viscosity: 2000FG Item N° 66295/300 = Viscosity: 3000FG Item N° 66295/400 = Viscosity: 4000FG Item N° 66295/500 = Viscosity: 5000FG Item N° 66295/600 = Viscosity: 6000FG Item N° 66295/700 = Viscosity: 7000FG Item N° 66295/800 = Viscosity: 8000FG Item N° 66295/900 = Viscosity: 9000FG Item N° 66296 = Viscosity: 10000Viscosity of silicone oil at various temperatures.
Content: 100 Milliliter (€154.00 / 1000 Milliliter)
Customers also viewed
Alloy ball-and-socket joints with surface coating, 70% less weight.
Genuine FG spare/option part.Spare part for 8514 FG Stabilizer adjustable for 2-damper front axle.Contents:4 pieces
Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M6 thread rods. Replacement for the plastic ball-and-socket joints 6029.Fits 10 mm balls, total length 39 mm.Contents:4 pieces
Genuine Smartech spare/option part.Content:1 set
Rim with 18 mm square drive. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.1/6 monster truck tires, hard, glued on chromed FG Monstervrim. Outer Ø 210mm, width 120mm, fits FG Marder, Off-Road Buggy, Beetle and Monster cars. Fits other makes of 1/6 cars as well, wheel square size must be checked prior to installation. Installation of tires with a different diameter may require a change in gear ratio as well.Diameter 195 mm Width 120 mm 1 pair
Genuine FG spare/option part.Steel ball-and-socket joint with 5mm bore in the ball and M8 right-hand thread for installation on the wishbones.Delivery contains all needed pin disks.Dimensions:A = 5 mmB = M8C = 8 mmD = 16 mmE = 37.5 mmContent:2 pieces