66245 FG Steel ball 7 mm

€5.30*

Prices incl. VAT plus shipping costs

Available

Product number: fg_66245

EAN: 3410564530528

Product information "66245 FG Steel ball 7 mm"

Genuine FG spare/option part.

Bore 3 mm.

Contents:

4 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

66244/01 FG Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs.

Item N° 66244/01 Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs.Spare part for the Leopard 2010 2WD/4WD version

€5.90*

6029/08 FG Ball-and-socket joint for M8

Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M8 thread rods. Replacement for the plastic ball-and-socket joints 6029/01.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

6402/01 FG Exhaust hose

Genuine FG spare/option part. Heavy gauge teflon tube for connection between exhaust manifold and tuned pipe with da inside diameter from 21 mm and a length from 50 mm.You may have to heat the tube with a cigarette lighter for installation.Contents:1 piece

Content: 5 Zentimeter (€244.00* / 100 Zentimeter)

€12.20*

y19133 Ball & socket tool

Genuine HT spare/option part. Ball & socket tool with t-handle, especially for installation and removal of balls in FG or Smartech/Carson cars' plastic a-arms and steering rod ball joints.Contents:1 piece

€17.90*

y1004 Driveshaft boots for ball drive + dogbones

Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces

€8.90*

8335 FG Insulator gasket for Solo

Genuine FG spare/option part. Spare part for Solo engines. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€3.30*

Similar products

66254, FG Axle shaft 6x50mm 4WD, 1 pce.

€4.30*

66223, FG Plastic bearing carrier 4WD

Genuine FG spare/option part.Contents:2 pieces

€5.50*

66211 FG Gear cover 4WD

Genuine FG spare/option part. Contents:1 piece

€6.90*

66266, FG Alloy a-arm, front upper 4WD, 1 pce.

Alternative: y2002 Alloy a-arm, front upper FG 4WD - Fits FG Leopard 4WD und Sportsline onroad 4WD with 510mm wheelbase.Does not fit FG Leopard 2WD und Sportsline onroad 4WD with 530mm wheelbase.

€39.95*

66256, FG Plastic cog belt pulley front 42T. 4WD, 1pce.

€23.90*

66222, FG Axle for tensioning pulley case, 4WD, 1pce

32mmx10mm mit 4mm tread

€5.30*

66267 FG Turnbuckle M10/M8x66mm, 2WD/4WD, 2 pcs.

M8 r/h thread / M10 l/h threadFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€19.50*

66210 FG Rear axle cover 4WD

Genuine FG spare/option part. Contents:1 piece

€10.95*

66250/01, FG Bracket f. stabilizer bar front 2WD/4WD, 2 pcs.

For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€3.50*

66207, FG Plastic cog belt pulley, rear 42T. 4WD

Genuine FG spare/option part.Contents:1 piece

€23.90*

66217 FG Steel pinion 14T narrow, 1pce.

Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€29.95*

66260/01, FG Plastic link for stabilizer bar, short, 4/4mm twisted, for 4WD, 2 pcs.

€3.90*

Customers also viewed

66244/01 FG Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs.

Item N° 66244/01 Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs.Spare part for the Leopard 2010 2WD/4WD version

€5.90*

6027/06 FG Steel ball 6 mm

Genuine FG spare/option part. Steel ball for FG 6027/05.Dimensions:Bore: 3 mmHeight: 8 mmContents:5 pieces

€5.40*

6027 FG Ball-and-socket joint 6mm with ball

Genuine FG spare/option part. Plastic ball joint Fits all FG cars.Dimensions:Thread size: M4Länge: 20 mmBall bore: 3 mmHeight: 8 mmContents:6 pieces

€14.50*

This product is currently not available.

Alloy servoarms, for 25 teeth multi-tooth shaft

y0700_alle Version: y0701 Double sided split alloy servoarm+ 7EUR

y0700 Double sided alloy servoarm: 9,90 EURy0700/01 Single-sided alloy servoarm: 7,90 EURy0701 Double sided split alloy servoarm: 14,90 EURy0701/01 Single-sided split alloy servoarm: 12,90 EURFor y0700, y0700/01, y0701 and y0701/01:Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaft Suitable for all servos with an output shaft with 25 teeth multi-tooth shaft, for example:y2006 Digital Big-Scale Servo D-21HVy2007 Digital large scale Brushless Servo CYS9130Nearly all Ribbe/Futaba servosMega Power servoThunder Tiger DS1015And many more!holes for linkage with M3 threadWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarm are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.

Variants from €9.90*

€16.90*

68323/03 FG Servo-Saver A/B, 80°

Genuine FG spare/option part. Improved servo saver parts A + B with changes in detail. A change of the slope angle improves the protective function. Depending on the steering servo and the desired hardness of the servo saver red and blue FG servo saver springs are recommended. Fits the 2010 model servo saver.Contents:2 pieces

€10.90*

7427 FG Plastic gearwheel 40 teeth

Genuine FG spare/option part.Suitable for all 1:5 models.Dimensions:Diameter 63 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5Contents:1 piece

€17.90*