8514/06 FG Ball-and-socket joint 7 mm

€6.50*

Prices incl. VAT plus shipping costs

Available

Product number: fg_8514_06

EAN: 3410569700544

Product information "8514/06 FG Ball-and-socket joint 7 mm"

Genuine FG spare/option part.

Spare part for 8514 FG Stabilizer adjustable for 2-damper front axle.

Contents:

4 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

y0711/01 Single-sided split alloy servoarm for Savöx SV-0236MG, Rhino and 805er Servo

Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaft!Suitable for all servos with an output shaft with 15 tooth spline shaft, for example:Multiplex RhinoHitec 805Savöx SV-0236MGLOSB 0886 S901T (Original Losi 5ive-T throttle Servo servo)LOSB 0884 S900S (Original Losi 5ive-T steering servo)and many more!holes for linkage with M3 threadWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.Content:1 pieces

€12.90*

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters

Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€37.90*

10645 FG Alloy rear brace

Genuine FG spare/option part. For cars with gear drive FG no.: 10639. Contents:1 piece

€3.60*

GPM Part 23 SCS23 shock shaft end, new version, 2 pcs.

The new version of the shock shaft end is recessed (without thread) allowing the shaft to go in deeper. This protects the critical transition from the thread to the shaft.With plastic bushing included.Length: 26.5 mm overall, about 22 mm to center of bushingM4 thread for shock shaftBushing i.d. 4 mm

€6.90*

AKX177/187-16 GPM Spring perches for GPM Arrma shocks

Genuine GPM spare/option part. Contents:1 piece

€8.90*

Similar products

8514/08 FG Collet set 4mm - 4pcs.

Spare part for .Outer diameter 8 mmWidth 5 mm

€7.50*

8513 FG Stabilizer 4mm for 2-damper front axle

Genuine FG spare/option part.4mm stabilizer for the 2-damper front axle, not adjustable. Not suitable for Ecoline, Mono-Shock front axle and monster models with four shocks per axle.Contents:1 piece

€19.90*

8513/01 FG Stabilizer 5mm for 2-damper front axle

Genuine spare/option part.5mm stabilizer for the 2-damper front axle, not adjustable. Not suitable for Ecoline and Mono-Shock front axle.Contents:1 piece

€23.90*

8519/01 FG Stabilizer shaft 3mm with ball end - 1pce.

Spare part for .

€21.80*

8507 FG Differential conversion kit 30° conical

Genuine FG spare/option part. Conversion kits for the alloy differential gears 8500/05 and 8501/05.You achieve an even more effective locking effect through the use of these conical friction surfaces.Contents:1 set

€52.40*

8517/03 FG Wishbone pin 6x110mm - 2pcs.

Spare part for .

€6.60*

8505 FG Mounting tool for bevel gear wheels - 1pce.

We essentially simplyfied the inserting of the differential bevel gear wheels with the mounting tool. Through the exact positioning of the bevel gear wheels it is guaranteed that the differential bevel wheel axle and the differential driving axle are in true alignment from the beginning.

€7.90*

8514/04 FG Stabilizer rods - 2pcs.

Spare part for .

€8.80*

8518 FG Stabilizer shaft 3mm with split taper socket - each 2pcs.

The stabilizer shaft 3mm is suitable for the FG rear ball stabilizer and FG front ball stabilizer . This 3mm shaft is useful when it is wet, with bad traction or for precise adjustment. Enclosed split taper socket serves as reducing bush and for hardness adjustment.

€38.40*

8519 FG Stabilizer shaft 3mm with split taper socket - set

€62.60*

8507/02 FG Taper disk 30°

Genuine FG spare/option part. Spare part for 8507.Contents:1 piece

€12.40*

8518/01 FG Stabilizer shaft 3mm - 2pcs.

Spare part for .

€22.00*