66220 FG Alloy tensioning pulley case, l/h 4WD

€37.50*

Prices incl. VAT plus shipping costs

Available

Product number: fg_66220

EAN: 3410564530351

Product information "66220 FG Alloy tensioning pulley case, l/h 4WD"

Genuine FG spare/option part.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

66211 FG Gear cover 4WD

Genuine FG spare/option part. Contents:1 piece

€6.90*

66267 FG Turnbuckle M10/M8x66mm, 2WD/4WD, 2 pcs.

M8 r/h thread / M10 l/h threadFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€19.50*

66245 FG Steel ball 7 mm

Genuine FG spare/option part. Bore 3 mm.Contents:4 pieces

€5.30*

66254, FG Axle shaft 6x50mm 4WD, 1 pce.

€4.30*

66223, FG Plastic bearing carrier 4WD

Genuine FG spare/option part.Contents:2 pieces

€5.50*

66250/01, FG Bracket f. stabilizer bar front 2WD/4WD, 2 pcs.

For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€3.50*

66210 FG Rear axle cover 4WD

Genuine FG spare/option part. Contents:1 piece

€10.95*

66256, FG Plastic cog belt pulley front 42T. 4WD, 1pce.

€23.90*

66222, FG Axle for tensioning pulley case, 4WD, 1pce

32mmx10mm mit 4mm tread

€5.30*

66266, FG Alloy a-arm, front upper 4WD, 1 pce.

Alternative: y2002 Alloy a-arm, front upper FG 4WD - Fits FG Leopard 4WD und Sportsline onroad 4WD with 510mm wheelbase.Does not fit FG Leopard 2WD und Sportsline onroad 4WD with 530mm wheelbase.

€39.95*

66207, FG Plastic cog belt pulley, rear 42T. 4WD

Genuine FG spare/option part.Contents:1 piece

€23.90*

66237/01 FG Gilmer belt 15mm, 530/535 long, 1 pce.

Item N° 66237/01 Gilmer belt 15mm, for Leopard 4WD 530, Offroad 4WD 535 and Sportline TW 4WD 535, 1 pce.

€54.90*

Customers also viewed

8300 Samba 8 Titan Racing - tuned pipe system DMC 10-1504

The Samba 8 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 8 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"

€399.00*

Details

TT1021/07 Top Tuning electric Motor pinion nitrided hardened, 8 mm bore, module 1.5

Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece

€23.90*

Details

8058 FG Body set BMW E30, painted 2 mm

Genuine FG spare/option part. The body set contents the main part, front body and the rear wing. The body is painted and decorated with stickers. Required body mounts:Mount front: FG 7020/06 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsDimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mmContents:1 piece

€309.95*