EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Go to homepage
Quick shipping until 14 o'clock
PartScout
€0.00*
Quick shipping until 14 o'clock

6048/03 FG Secondary crown gear 74 Teeth

€56.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_6048_03
EAN: 3410569716651

Product information "6048/03 FG Secondary crown gear 74 Teeth"

Genuine FG spare/option part.

ClutchGear shaft outerGear shaft innerDifferentialReduction ratio
345823735,41
345823745,49
345824735,19
345824745,26
355823735,26
355823745,33
355824735,04
355824745,11
365823735,11
365823745,18
365824734,90
365824744,97
375823734,98
375823745,04
375824734,77
375824744,84


Contents:
  • 1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Alternatives

6495 FG Fine pitch gears EVO 2020
6495 FG Fine pitch gears EVO 2020
Genuine FG spare/option part. ClutchGear shaft outerGear shaft innerDifferentialReduction ratio345823735,41345823745,49345824735,19345824745,26355823735,26355823745,33355824735,04355824745,11365823735,11365823745,18365824734,90365824744,97375823734,98375823745,04375824734,77375824744,84Contents:1 set

€279.95*

Similar products

y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft
y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft
Fits FG and Smartech touring cars. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car. The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions. The following measures are required for installation of the HT-steel gear adapter "on-road" on the layshaft in FG EVO 2020 cars:- The installed wide 16T layshaft pinion 6431/01 must be replaced by the narrow version 6431.- The supplied 1mm shim must be added between layshaft pinion and ball bearing.- The flat sections on the layshaft do not have the usual 180° offset for the adapter; therefore only one grub screw will be used. However, since this is a wide face M8 version, this is no disadvantage.

€69.90*
Configure now
6492 FG Steel spur gear 46T with adapter - set
6492 FG Steel spur gear 46T with adapter - set
Hardened steel spur gear for FG 1/6 off-road models, spur gear diameter 72 mm.Module: m=1,5

€97.90*
y0191 HT-Steel spur gear 46 teeth
y0191 HT-Steel spur gear 46 teeth
Fits the y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaftInner diameter and bolt pattern are the same as a standard FG differential spur gear.Module: m=1,5Content:1 piece

€49.90*
y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaft
y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaft
This carriers makes it possible to run steel spur gears on the layshaft. Pebbles heat and the high torque of monster truck applications are no longer a problem.The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of the pinion and the spur gear carrier are pointing to the outside of the car. The carrier features M8 (eight, no typo) grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.

€89.90*
6048 FG Steel gearwheel big 48 teeth
6048 FG Steel gearwheel big 48 teeth
Genuine FG spare/option part. Differential spur gear for all FG street cars except Formula 1. Can also be used as a main spur gear on the layshaft on monster models when mounted on alloy gear carrier y0190.Dimensions:Outer diameter: 75 mmWidth: 7.5 mmBore: 45 mmModule: m=1,5Contents:1 piece

€52.90*
LOS252080 Losi Center Transmission Gear Set, Super Baja Rey / 2.0 / Super Rock Rey
LOS252080 Losi Center Transmission Gear Set, Super Baja Rey / 2.0 / Super Rock Rey
Genuine Losi spare/option part. Contents:2 pieces

€69.99*
y0692 HT-Gearset for layshaft and differential fine pitch for 1/5 onroad
y0692 HT-Gearset for layshaft and differential fine pitch for 1/5 onroad
Genuine HT spare/option part.Fine pitch gears for layshaft and differential, for competition use in touring car and GT models only. The gears run smoother and quieter than the stock parts, reducing the car's rolling resistance.Module: m=1Fits FG and Smartech / Carson cars. Only for use as a set, not in combination with standard pitch gears!Contents:2 pieces

€79.90*
6495 FG Fine pitch gears EVO 2020
6495 FG Fine pitch gears EVO 2020
Genuine FG spare/option part. ClutchGear shaft outerGear shaft innerDifferentialReduction ratio345823735,41345823745,49345824735,19345824745,26355823735,26355823745,33355824735,04355824745,11365823735,11365823745,18365824734,90365824744,97375823734,98375823745,04375824734,77375824744,84Contents:1 set

€279.95*
6491 FG Steel spur gear 44T with adapter - set
6491 FG Steel spur gear 44T with adapter - set
Hardened steel gearwheels for the gears of the 1/6 off-road models.Module: m=1,5

€93.90*
y0191/01 HT-Steel spur gear 48 teeth
y0191/01 HT-Steel spur gear 48 teeth
Fits the y0190/48 HT-Alloy carrier with steel spur gear 48T for the layshaftInner diameter and bolt pattern are the same as a standard FG differential spur gear.Module: m=1,5Content:1 piece

€49.90*
6493/01 FG Steel spur gear 48T - 1 pce.
6493/01 FG Steel spur gear 48T - 1 pce.
Item N° 6493/01 Steel spur gear 48T - 1 pce.Outer diameter: 75 mmInner diameter: 26 mmBolt circle: 3 x 35 mmWidth: 10 mmModule: m=1.5

€59.90*
6493 FG Steel spur gear 48T with adapter
6493 FG Steel spur gear 48T with adapter
Genuine FG spare/option part. Hardened steel gearwheels for the gears of the 1/6 off-road models.Module: m=1,5Contents:1 set

€93.50*

Customers also viewed

y0692 HT-Gearset for layshaft and differential fine pitch for 1/5 onroad
y0692 HT-Gearset for layshaft and differential fine pitch for 1/5 onroad
Genuine HT spare/option part.Fine pitch gears for layshaft and differential, for competition use in touring car and GT models only. The gears run smoother and quieter than the stock parts, reducing the car's rolling resistance.Module: m=1Fits FG and Smartech / Carson cars. Only for use as a set, not in combination with standard pitch gears!Contents:2 pieces

€79.90*
7432/25 FG Steel gearwheel hardened 25 teeth
7432/25 FG Steel gearwheel hardened 25 teeth
Suitable for 39, 40 and 41 teeth main gear wheel.Measures:Diameter: 38,7 mmBore: 10 mmTotal width: 18 mmTooth width: 11,5 mmModule: m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.Content:1 piece

€35.10*
6776 FG Alloy Ring Gear Adaptor male
6776 FG Alloy Ring Gear Adaptor male
Genuine FG spare/option part. Contents:1 piece

€65.90*
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency