4429 FG Steel balljoint
€42.30
Available
Product information "4429 FG Steel balljoint"
Steel ball-and-socket-joint with 5mm bore in the ball and M6 right-handed thread for use with the wishbones.
For the installation are needed the adjusting screws 4430 or 4431.
The delivery contains all needed pin disks.
Dimensions:
- A = 5 mm
- B = M6
- C = 8 mm
- D = 15.5 mm
- E = 37 mm
Contents:
- 2 pieces
Login
Accessories / Spare parts
Genuine FG spare/option part.Steel taper disks, 3.5 mm thick, with a higher stiffness compared to alloy taper disks. Installation of these disks allows for larger operation angles of the metal ball joints and rose joints. You need two disks per joint.Contents:4 pieces
Customers also bought
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)17 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 17 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces
Genuine FG spare/option part. Spare part for :6250/018450/0184521045010451Content:4 pieces
Genuine HT spare/option part. Dimensions:Inner diameter: 4 mm/li>Outer diameter: 5.5 mm/li>Width: 5 mmContents:4 pieces
Customers also viewed
Steel ball joint 6 mm r/h or l/h thread, 4 mm bore in ball, for steering rods and other applications.This version is for steering rod applications.Sets available:One each with r/h and l/h threadOne x r/h threadOne x l/h thread Please note:We recommend using a nut 4472/03 for locking the r/h thread ball joint to prevent the linkage from loss of adjustment.
Alloy ball-and-socket joint with 5mm bore in the ball and M8 right-hand thread for use with wishbones.When using these ball joints you will get a weight reduction in comparison with,A = 5 mmB = M8C = 8 mmD = 17.5 mmE = 39 mm
Genuine GPM spare/option part. All-metal steering rods from GPM made of 6061T6 aluminum and stainless steel for Arrma Kraton / Outcast 8S. Thanks to clamping device on the ball cups, no lock nuts are required.Contents:1 set
Genuine FG spare/option part.Steel ball-and-socket joint with 5mm bore in the ball and M8 right-hand thread for installation on the wishbones.Delivery contains all needed pin disks.Dimensions:A = 5 mmB = M8C = 8 mmD = 16 mmE = 37.5 mmContent:2 pieces
Genuine FG spare/option part. Solid steel ball-and-socket joints with 4mm boring in the steel ball and M7 right handed thread. Clearance- and maintenance-free. Useable for the F1 front and rear axle instead of the plastic ball-and-socket joints 10mm 10027 and 10027/07.For mounting the wishbone thread rods M7 and hexagon nuts M7 with right-handed thread 10437, 10437/01 are necessary. Dimensions:A = 5 mmB = M7C = 14.5 mmD = 16.5 mmE = 45.7 mmContents:2 pieces
Genuine HT spare/option part. Foldable maintenance tray, ideal for 1/5 and 1/6 cars; even for heavy weight and high ground clearence cars like a Losi 5ive-T!Size folded:Width: 300 mmHeight: 315 mmDepth: 40 mmWeight 1 kgSize erected: Width: 300 mmHeight: 220 mmDepth: 210 mmContents:1 piece