Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

4429/02 FG Steel taper disk 5mm bore

Product information "4429/02 FG Steel taper disk 5mm bore"

Genuine FG spare/option part.

Steel taper disks, 3.5 mm thick, with a higher stiffness compared to alloy taper disks. Installation of these disks allows for larger operation angles of the metal ball joints and rose joints. You need two disks per joint.

Contents:
  • 4 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

y0888 Steel low height nut M6, r/h or l/h thread, 2 pcs.
gewinde_0008 Thread: y0888/01 Righthand
M6 thread, 3 mm thick, pack of two.Part is delivered in silver or black color from vendor!

€2.70*

Average rating of 0 out of 5 stars

4472/03 FG Hexagon nut M8 right
Genuine FG spare/option part.Counternut for track rod, 3,8 mm thick.Part is delivered in silver or black color from vendor!Contents:2 pieces

€3.20*

Average rating of 0 out of 5 stars

4472/02 FG Hexagon nut M8 left
Genuine FG spare/option part.Counter nut for track rod, 3,8 mm thick.Part is delivered in silver or black color from vendor!Contents:2 pieces

€3.30*

Customers also viewed

Average rating of 0 out of 5 stars

6027 FG Ball-and-socket joint 6mm with ball
Genuine FG spare/option part. Plastic ball joint Fits all FG cars.Dimensions:Thread size: M4Länge: 20 mmBall bore: 3 mmHeight: 8 mmContents:6 pieces

€15.50*
%

Average rating of 0 out of 5 stars

306050, Carson alloy a-arms, rear upper, pair
Rear upper a-arms, a clamping system for the turnbuckles makes lock nuts obsolete.

€24.95* €49.90* (50% saved)

Average rating of 0 out of 5 stars

5020/01 FG Front bumper Porsche GT2/GT3
Genuine spare/option part.Suitable for FG Porsche GT2/GT3 body.Dimensions:Length: 340 mmWidth: 115 mmContents:1 piece

€35.90*

Average rating of 0 out of 5 stars

y0700 Double sided alloy servoarm, 1 pce.
Item N° y0700 Double sided alloy servoarm, 1 pce.Suitable for all servos with an output shaft with 25 teeth multi-tooth shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!When you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.

€12.90*

Average rating of 0 out of 5 stars

1000-51-R Mecatech adapter plates rear, 2 pcs.
Replacement part for Mecatech twin piston hydraulic brake. The plate has a thickness of 2,7 mm.

€42.90*

Average rating of 0 out of 5 stars

FG Formula 1 Sportsline
Completely mounted, with a 26 cm³ combustion engine and final speed of almost 100 km per hour, what else would you want?A further additional improvement is the installed front disk brake. A clear polycarbonate bodyshell is included.Quality and high-class equipment to a sensible price.Technical description of the Formula 1 Sportsline chassis:The undercarriage of the FG Formula 1 is built on a high-strength 5 mm alloy chassis. All chassis borings (screws) are countersunk. The front and rear axle with their various adjusting possibilities as king pin angle, trailing effect etc. consist of double delta wishbones. The double delta wishbones of the rear axle are supported by additional track rods which enable you a very fast set-up. All adjustments can be made without a dismounting of parts according to the fixed wishbone threaded rods with right-/left-handed thread.The model is equipped with 4 alloy oil-pressure shock absorbers. The push-rod suspension ensures the transmission between single wheel suspension and shock absorber.We deliver this chassis with a powerful 26 cc combustion engine. The engine's power is transmitted over a four-block Teflon clutch on a synchronous belt drive. This synchronous belt drive is also designed for a higher driving power. The BBS wheels and the tires are copies of the big models. All rotating parts are supported by ball bearings.The construction of the Formula 1 chassis is not identical with the other 1:5 scale FG models such as Merc. C-Class, Race Truck a.s.o. and therefore it can?t be converted into or from these models by a conversion kit.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 960 mmWidth: 440 mmHeight: 230 mmWheelbase: 620 mmFormular 1 models in action!

€1,279.00*

Average rating of 0 out of 5 stars

y6479 HT rear alloy upright
Genuine HT spare/option part.Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (hinge pin), too. Fits the rear axle of all FG and Carson / Smartech 1/6 scale cars.Comes with adjustment clips and grub screws for the hinge pins included.Dimensions:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm Contents:2 pieces

€89.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development