Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

4419 FG adjustable 3-shoe clutch for Evo 2020

Product information "4419 FG adjustable 3-shoe clutch for Evo 2020"

Genuine FG spare/option part.

Content:
  • 1 piece


0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

Mielke 5542 Power Gearshift clutch for FG Formula 1/RS5 TC/F1/Harm Sx4 TC/Evo 2020 ,Mix, 2,4mm springs with short clutch carrier
The new adjustable system features two aluminum and one carbon pad with special 2.4 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.For RS5 models till version T13!Not for FG F1 Sportsline models!

€129.50*

Average rating of 0 out of 5 stars

Mielke 5442 Power Gearshift clutch for FG Formula 1 Competition / RS5 TC/F1 / Harm Sx4 TC / Evo 2020, Mix, 2,3mm springs, short clutch carrier
The new adjustable system features two aluminum and one carbon pad with special 2.3 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.For RS5 models till version T13!Not for FG F1 Sportsline model!

€129.50*

Average rating of 0 out of 5 stars

5642 Mielke Power Gearshift II Converse clutch for Harm SX 4 / FG 2020 / RS5 and some Formula, 2,4mm springs, alu with short clutch carrier
Genuine Mielke spare/option part. Fits Harm SX 4 / FG 2020 / some F1 cars / Harm Formel FX 3.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece Not fit in FG Formula 1 sportsline models!

€129.50*

Average rating of 0 out of 5 stars

5652 Mielke Power Gearshift II Converse clutch MIX for Harm SX 4 / FG 2020 / some Formula 1 cars with short clutch carrier
Genuine Mielke spare/option part. Fits Harm SX 4 / FG 2020 / some F1 cars / Harm Formel FX 3.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece Not for FG Formula 1 sportsline models!

€129.50*

Similar products

Average rating of 0 out of 5 stars

y1419/01 Clutch spring 6.000 1 / min for the Sintered clutch for Zenoah, Chung Yang, Losi, HPI & Co.
Clutch spring for about 6,000 1 / min. for the OEM clutches from Zenoah and many other rc-car engines from 23 cm³ - 32 cm³.Content:1 piece

€5.90*

Average rating of 0 out of 5 stars

7316/09, FG OEM clutch complete, set for Zenoah/CY/Fuelie/Losi engines
Complete clutch with spring, carrier and bolts. For Zenoah G230/240/260/270/290/320 und CY / Fuelie / Losi engines.

€32.30*

Average rating of 0 out of 5 stars

67350 FG Tuning clutch / Zenoah, set
Item N° 67350 Tuning clutch / Zenoah, setComplete clutch with Tuning carrier, lighter clutch blocks, coated dowel screws and reinforced clutch spring. According to the lighter weight the engine speed is slightly higher when the clutch comes, therefore the engine has more power speeding up.

€65.90*

Average rating of 0 out of 5 stars

7316 FG Clutch blocks for Zenoah
Genuine FG spare/option part. Zenoah bolts 7318 are required for installation.Content:2 pieces

€19.90*

Average rating of 0 out of 5 stars

y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch
With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 139.90

€149.90*
%

Average rating of 0 out of 5 stars

y1419 Sintered steel clutch for Zenoah and many other engines from 23 cm³ to 32 cm³
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!

€19.90* €27.90* (28.67% saved)

Average rating of 0 out of 5 stars

y0723 Gas-nitrited tuning clutch bell for FG, Smartech/Carson, Harm, RS5 & Co.
Genuine HT spare/option part. Gas-nitrited tuning clutch bell; machined from high grade steel with vents for cooling of the clutch system and holes for easy clutch adjustment. The clutch bell features a significantly reinforced wearing surface which guarantees dimensional stability even under high loads!For best mounting of the pinion the clutch bell shaft has to flats with a 90° offset. As an additional safety device a M5 bolt with washer (included) replaces the E-clip found on stock clutch bells.Suitable for many 1/5 and 1/6 cars, such as all FG (except Formula 1), Carson a.s.o.Contents:1 piece

€49.90*

Average rating of 0 out of 5 stars

5715 FG Clutch block carrier für Chung Yang
Genuine FG spare/option part. Contents:1 piece

€9.80*

Average rating of 0 out of 5 stars

y0732 GPM Big Scale Cross adjustable 3 shoe clutch with tuning clutch bell, 1 pce.
Regular price Big Scale Clutch: 109,90 EUR Nitriding hardened clutch bell: 40,50 EUR complete price:.......................150,40 EURAdjustable 3-shoe clutch for:Zenoah / Chung Yang / HPI - Fuelie / Smartech PT and many other engines.The Big Scale-Cross clutch is equipped with 1.3 mm springs. This version is particularly suitable for off-road use.The GPM-Big Scale clutch:Suitable for racing and for the ambitious hobbyist driver. Unlike the stock clutch, the installed GPM-Big Scale clutch can be adjusted by turning one single screw. A 2.5 mm allen key wrench is required for this application.Therefore it is possible to precisely adjust the clutch engagement depending on track characteristics.Attention: You must use adhesive y0743 Clutch-Safe when replacing clutch pads!

€129.99*

Average rating of 0 out of 5 stars

5716 FG Clutch blocks for Chung Yang
Genuine FG spare/option part. Chung Yang bolts 5718 are required for installation.Contents:2 pieces

€19.90*

Average rating of 0 out of 5 stars

5717 FG Clutch spring for Chung Yang
Genuine FG spare/option part.Contents:1 piece

€6.50*

Average rating of 0 out of 5 stars

7315 FG Clutch block carrier Zenoah
Genuine FG spare/option part. Content:1 piece

€9.40*

Customers also viewed

Average rating of 0 out of 5 stars

y0730/19 Full-aluminum clutch shoes conversion kit
Genuine GPM spare/option part. Full aluminum clutch shoes are very successfully used in 1/5 onroad racing applications.Therefore we can now offer the GPM conversion kit for BigScale Cross/Race clutches to full-aluminum clutch shoes. Made of a special alloy to suit this application the kit comes with 1.4 mm wire diameter springs and new spring pressure plates.Slight aluminum deposits in the clutch bell and corresponding wear marks in the clutch shoes are normal with the Big Scale ALLOY clutch and have no negative effect on the function. Caution: It is very important that when swapping the full-aluminum clutch shoes against the organic friction pads of a Big Scale CROSS or RACE to use a different or new , because the rough surface of the aluminum deposits in the clutch bell left by the Big Scale ALLOY will cause a high wear on the organic pads.y0730y0731Content:1 set

€54.90*

Average rating of 0 out of 5 stars

Lauterbacher 3 jaw clutch adjustable for FG / Carson / HPI / Losi Modelle, used "3"
Lauterbacher clutch adjustable for FG, Carson, HPI, Losi and many other models with long adapter for Zenoah, CY or similar engines, used.See photos for condition and delivery.

€39.00*

Average rating of 0 out of 5 stars

5851 Mielke Power Gearshift II Converse clutch for FG, Harm SX3, RS5, Losi, HPI Carbon with 2mm springs, long clutch carrier
Genuine Mielke spare/option part. Fits for FG, Losi, HPI.For onroad vehicles, less Grip or rain use.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece

€129.50*

Average rating of 0 out of 5 stars

Steel tuning resonance pipe system Xandi, used
Chrome-plated tuning resonance tube for 2WD on-road models from FG and other manufacturers with horizontal engine. Not suitable for Carson/Smartech models. See photos for condition and scope of delivery. 1 piece.

€85.00*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development