y2012-01LL Complete low-friction Ball bearing set for FW01

€79.90*

Prices incl. VAT plus shipping costs

Available

Product number: mec_2012_01ll

EAN: 4058575055259

Product information "y2012-01LL Complete low-friction Ball bearing set for FW01"

Complete low-friction ball bearing set ABEC-7 for the Mecatech FW01, sealed on both sides.

Set includes:

Order no.:Dimensions:Position:Unit:Price:2012-32LL8/19/6Wheel8 pieces43,80 EUR2012-93LL10/19/5Clutch3 pieces21,50 EUR2012-110LL12/21/5Layshaft2 pieces14,90 EUR2012-175LL15/24/5Differential2 pieces15,90 EUR2012-58LL8/12/3,5 (Flanged)Stabiliser4 pieces21,90 EURTotal:19 pieces118,-- EURSet price: 79,90 EUR

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

y0781 Dry-Fluid Extreme especially for RC-Cars, 20 ml

Dry lubricant instead of oilWe did not think that today its still possible to make a real improvement in lubricants!DryFluid Extreme is especially designed for remote control model cars, with the aim to maintain the functionality and durability of these little racers as long as possible or to even extend significantly.The effect of the new lubricants for shafts, bearings, guides and ball joints starts where other lubricants reach their limits. Low friction, high lubricity and minimal attractivity to dust or dirt were the main developmental targets. Recent findings in aerospace and automotive technology as well as the experience of RC car drivers are the mentors of innovation of this new lubricant.What is DryFluid Extreme RC-Cars?DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Ease of application and long-term effects of DryFluid Extreme will delight any modeler.DryFluid Extreme product featuresReduces the power losses of shafts, bearings and ball joint systems and guarantees a long life of the treated componentsLowest friction for smooth operation and wear reductionMultistage lubricant system with immediate and long-term lubrication effectsDoes not bind any dust or dirtExtremely good penetrating abilityHighest compatibility with all common materials like metals, plastics and rubberExcellent adhesion and corrosion protection propertiesThe use of DryFluid Extreme RC-CarsThe main effect of DryFluid Extreme is the reduction of friction and wear on shafts, bearings, guides and ball joint systems. The dry components do not bind any dust or dirt and ensure best possible long term lubrication effects.For best results the parts to be treated should be thoroughly cleaned and the fluid applied sparingly. Repeated use increases the long-term effect.Before use, shake bottle vigorously for a short time!Nanotec lubricant for joints, shafts, bearings and gears of rc-cars. Excellent long term lubrication effects. Use included put-on canula for fine dosing. Let dry for several minutes after application and close bottle tightly. Shake well before use Attention:Keep out of reach of children. Do not swallow. Avoid contact with eyes. Keep away from ignition sources. Keep bottle closed tightly.

Content: 20 Milliliter (€845.00* / 1000 Milliliter)

€16.90*

y2012-01 Complete Ball bearing set for FW01

Complete ball bearing set for the Mecatech FW01, sealed on both sides.

€59.90*

y0781/01 Dry-Fluid "Gear Lube" for gears, 10/20 ml

y0781_01 Size: y0781/20 - 20 ml+ 8.1EUR

Dry lubricant instead of oil DryFluid Extreme Gear Lube is specifically designed for highly loaded gears in models. It is characterized by extreme pressure resistance and excellent adhesion. Through the use of solid lubricant components, it shows only a slight tendency for dust and dirt retention. Main applications of the newly developed Gear Lube Gear are of model helicopters, rc-cars and trucks, model trains and servos. Also ideally suited for shafts and gimbals of any kind.DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Especially the long-term effects of DryFluid Extreme will delight any modeler. Product characteristics at a glance: Exciting lubricating propertiesReduces power losses caused by friction Reduces operating noise Reduces wear Extremely pressure resistant Long-term stability Highest adhesion High material compatibility with metals, plastics and rubber materials Low tendency for dust and dirt binding Application Notes: A thin layer of the Gear Lube is enough for an extreme lubricating effect. If possible, apply to an upright standing gear and rotate it during the application. For hard to reach places and selective applications use the included canula. For fine and uniform distribution use a fine hair brush immediately after the application of Gear Lube. Transmissions that have not been treated with Gear Lube before should be thoroughly cleaned first. Shake well before using and apply sparingly!High End dry lubricant for highly loaded gears in models. Especially for transmissions of model helicopters, rc-cars, trucks, model trains and servos. Can also be used for shafts and gimbals of any kind Through the use of dry particles, lubricating polymers and high-end lubricating fluids an unprecedented lubricating effect is achieved. Extremely pressure-resistant and with excellent adhesion. Very low tendency for dust and dirt retention. Multistage dry lubricant system with long-term effects.

Content: 10 Milliliter (€2,500.00* / 1000 Milliliter)

Variants from €16.90*

€25.00*

Customers also viewed

y2012-01 Complete Ball bearing set for FW01

Complete ball bearing set for the Mecatech FW01, sealed on both sides.

€59.90*

5312 FG Needle bearing complete

Genuine FG spare/option part.Contents:1 piece

€11.00*

y1045 hydraulic brake lining 4mm - 1 St

hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Length: 1 meterDimensions:Inner diameter: 2 mmOuter diameter: 4 mm

€4.90*

2012-32 Mecatech Lager 8x19x6

Genuine Mecatech spare/option part for the FW01.Wheel bearings front and rear, sealed on both sides.Content:1 piece

€7.50*

2012-175 Diff.ball bearing

Genuine Mecatech spare/option part for the FW01.Differential ball bearing, sealed on both sides.Content:1 piece

€9.75*

y1354 SPEED TEC Aluminum insulator for Zenoah and Chung Yang engines

y1354 Version: y1354/01 SPEED TEC Cross

Genuine Speed-Tec spare/option part. Due to the air boxes mandatory for racing and the required off-road air filters, a strong and rigid insulator is a must! No more stripped threads, no warpage and the resulting air leaks at the insulator anymore! So many weird running behaviors, for example if the engine is warmed up and a tiny gap occurred at the insulator, are caused by this distortion of a plastic insulator. The increased heat transfer of the aluminum is taken into account by addition of an insulator plate. Therefore the aluminum intake is largely insulated. Due to the face-milled surfaces of the aluminum intake you reach a greater durability of the gaskets. The SPEED TEC aluminum insulator is available with two insulator plates.y1354/01 SPEED TEC cross aluminum insulator with 7 mm insulator plate and therefore a longer intake path for more torque. Ideal for off-road and cars. y1354/02 SPEED TEC Race aluminum insulator with 4 mm insulator plate, better for maximum rpm and therefore best for on-road use! Dimensions: Height of aluminum intake 20 mmHeight of cross version insulator plate - 7mm Height of Race version insulator plate - 3 mm Contents:Aluminum intake insulator plate 3 x gasket 2 x allen screw 5 x 30 mm 2 x washer 5/9.8 mm

€59.90*

This product is currently not available.

2020-18 Mecatech Adjustable 3 Shoe Clutch

Genuine Mecatech spare/option part. This completely new developed adjustable clutch fits by default in combination with the Mecatech and Genius clutch bells. But combined with a special washer it can also be used on other brands.The shoes in this clutch are mounted in the direction of rotation (reverse), similar to other actual clutch designs.It is of course possible adjust this clutch to engage at different rpm's. The clever design of this clutch makes it very easy to disassemble and adjust the clutch. This requires only 2 separate tools.The first tests in Italy have shown that even after 2 hours of continuous driving, the clutch acts more smooth and precise compared to others. Furthermore the engagement remains very stable and the wear was negligibleContents:1 piece

€149.90*