2012-112 Mecatech Pinion Z24

€41.80*

Prices incl. VAT plus shipping costs

Available

Product number: mec_2012_112

EAN: 4058575035930

Product information "2012-112 Mecatech Pinion Z24"

Genuine Mecatech spare/option part for the FW01.

Content:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

1000-34/DOT4/DOT5 Mecatech seal

Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Compatible with the DOT4/DOT5brake fluid.Contents:1 piece

€5.50*

1000-36/DOT4/DOT5 Mecatech o-ring

Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Compatible with the DOT-4 brake fluid.Contents:4 pieces

€6.00*

2012-223 Mecatech Clutch pinion 34 teeth

Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€33.00*

Details

- PMT - Supreme V4-Q03 (Soft)

Exciting news for the modeling world: Introducing the new 1:5 Supreme V4.With a fresh design and innovative tread patterns for even higher performance. We are thrilled to present the 1:5 Supreme V4 – our revolutionary tire for the world of four-wheeled modeling. The new V4 aims to raise the bar in competitions and cater to the needs of drivers. It features a redesigned tread with new patterns meticulously crafted for enhanced performance. Let’s see its key features: Exceptional Grip: Advanced tread patterns for unparalleled traction on various asphalt conditions. Simplified Driving: Superior control for a smoother and more effective driving experience. Enhanced Durability: Thanks to the new tread design, the tire’s performance remains consistent even in longer sessions. Available in Three Different Compounds. Like all our products, the V4 is available in various compounds to accommodate different asphalt conditions: - Q01 – SuperSoft - Q03 – Soft - Q05 – MediumNote:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability.Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!Dimension:Outside diameter: approx. 116 mmWidth: approx. 65 mmRims: 18 mm square driveContents:2 piece

€45.90*

2012-34 Mecatech Front axle Wheels

Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€11.00*

2012-154 Mecatech Pinion Z 25

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.70*

Similar products

2012-106 Mecatech Aluminium Washer for Engine Fastening

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€8.30*

2012-108 Mecatech Zahnrad Z64

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€61.00*

2012-104 Mecatech Countersunk Screw M5x14

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

2012-123 Mecatech Bush for rear Wheel Toe in 1° -3°

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

2012-122 Mecatech Rear Driving Axle

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€23.00*

2012-105 Mecatech Countersunk Screw M5x12

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

2012-107 Mecatech Gearwells Retaining Ring

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€2.60*

2012-121 Mecatech Square Wheel Driver 11,5 mm

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€17.50*

2012-124 Mecatech Bush for rear Wheel toe in 1,5° -2,5°

Genuine Mecatech spare/option part for the FW01.Contents:4 pieces

€29.50*

Details

GPM 6079/01 Ball drive wheel shaft for all FG and Mecatech cars, 1 pce.

Fits all FG cars and the Mecatech FW01. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins. The GPM ball drives can be partially mixed with FG parts. The heads of the GPM driveshafts fit into FG differential cups or wheel shafts.The opposite combination, i.e. FG shafts in GPM differential cups or wheel shafts does not always fit. We had tests where some FG shafts fit neatly, but due to slight tolerances others who did not fit into the very same cups/shafts. For this combination, we can not guarantee compatibility! Dimensions: Diameter: 8 mmTotal length 76.6 mm

From €32.90*

Details

2012-120 Mecatech Spacer for Rear Upright Bearing

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€5.90*

2012-115 Mecatech Rear upper Wishbone Shaft

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€7.70*

Customers also viewed

2012-154 Mecatech Pinion Z 25

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.70*

2012-113 Mecatech Pillar Rear Axle LH

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€77.90*

2012-204 Mecatech Brake HUB rear 11,5 mm

Genuine Mecatech spare/option part for the FW01.With a special mount for the brake disk.Content:2 pieces

€54.90*

Details

2012-65 Mecatech Steering and rear antiroll bar plastic joint

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€5.50*

Mecatech FW01 Touring car, wheelbase 510 mm, Basic Kit -- Europe- and world champion

The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Basic Kit of the FW01 is especially intended for "switchers" and differs from the chassis kit in terms of the brakes and shock absorbers (included in the chassis kit). Here is a list of the parts that are required for completion:brakes, shocks and springs (Difference to Chassis Kit)DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlStock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73TCurrently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us!The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01.Included in the basic kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the engineDoes not include- Brakes, shocks and springs- differential- clutch- body and spoilers- Airbox- Engine and linkage- Electronics- Tires

€1,862.00*

Carburetor Walbro WT 813

y0251 Performance carburetor with accelerator pump type: WT-813Walbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15.88mm bore, 12.7mm venturi. Ready for installation with modified shaft already installed. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well. Fits all Zenoah G230/240/260/270 and 290 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.

€79.90*

Configure now

4402 FG Alloy steering stop for alloy uprights

Genuine FG spare/option part. A buckling of the inner front wheel in curves becomes impossible when mounting the alloy steering stop.Suitable for 6103/05, 6103/06, 4403, 4403/01, 4404 and 4406.Dimensions:Length: 24 mmDiameter: 7 mmThread: M4 Contents:2 pieces

€13.20*