y2004 Tuning aluminum rear suspension set for nearly all FG 4WD Sportsline cars

rc-car-online

€339.90*

% €379.40* (10.41% saved)

Prices incl. VAT plus shipping costs

y2004 Model

y2004/01 - FG 4WD Monster-Truck Modelle, Beetle

y2004/02 - FG 4WD Touring car models (except Porsche GT3 RSR)

y2004/03 - FG 4WD/2WD Off-Road WB535

Product number: y2004.2

EAN: 4058575039945

Product information "y2004 Tuning aluminum rear suspension set for nearly all FG 4WD Sportsline cars"

Tuning aluminum rear suspension set for nearly all FG 4WD Sportsline cars: Monster-Truck, Off-Road Buggy, Marder, Beetle, Tourenwagen.
Does not fit Formula 1, Leopard and Truggy!

Assembled units in the pictures are completed with some parts which are not included. These parts will be re-used from the stock suspension when swapping in the aluminum version. You will also need two bags of 6100/04 Turnbuckle left/right M8/40mm.

y2004/01 fits:
FG 4WD Monster-Truck models and Monster Beetle models, Off-Road, Marder, Beetle, Porsche GT3 RSR and Race Trucks. The only difference between the sets is the length of the lower a-arms (y2004/01 = long, y2004/02 = short). The picture of the assembled set is used for both versions and shows the shorter arms.

Part number:	Name:
y2001	Aluminum rear upper a-arms
y68401	Aluminum rear lower a-arms long
66213	Aluminum rear shock tower
y66205/06	Aluminum rear diff mounts

y2004/02 fits:
FG 4WD Touring car models (except Porsche GT3 RSR).

Part number:	Name:
y2001	Aluminum rear upper a-arms
y68401/01	Aluminum rear lower a-arms short
66213	Aluminum rear shock tower
y66205/06	Aluminum rear diff mounts

y2004/03 fits:
FG 4WD/2WD Off-Road WB535.

Part number:	Name:
y2001	Aluminum rear upper a-arms
y68401	Aluminum rear lower a-arms long
66213/02	Aluminum rear shock tower
y66205/06	Aluminium rear diff mounts

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y2001 Alloy a-arm, rear upper FG 2WD/4WD/Leopard 2WD

Genuine HT spare/option part.Alloy a-arm rear upper for FG 2WD/4WD models. Replacement for FG item No.: 66225.Contents:1 piece

€19.90*

y68401 Rear lower alloy wishbones 2+4WD, set

Set contents rear lower wishbones, alloy ball-and- socket joints, hardened wishbone pins, small parts, screws.Suitable for Off-Road Buggy 2+4WD RTR, Off-Road Beetle 2+4WD RTR and Monster/ Stadium models 2+4WD RTR, 2+4WD Porsche.

€199.90*

y68401/01 Rear lower alloy wishbones small, set

Rear lower alloy wishbones salon cars, setSet contents small rear lower wishbones, alloy ball-and- socket joints, hardened wishbone pins, small parts, screws.Suitable for 4WD Mini Cooper and for FG 2WD Touringcar like the Sportsline or the Ecoline too. Or suitable for all 1:5 models with a width up to 400mm.

€199.90*

y6479 HT rear alloy upright

Genuine HT spare/option part.Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (hinge pin), too. Fits the rear axle of all FG and Carson / Smartech 1/6 scale cars.Comes with adjustment clips and grub screws for the hinge pins included.Dimensions:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm Contents:2 pieces

€89.90*

y68400 Alloy damper plate/ alloy rear axle mounts 2WD/4WD, set

The set includes right and left rear axle mounts, damper plate and screws.Suitable for Off-Road Buggy 2WD/4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR, for all 2WD/4WD On-Road models. For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.https://rc-car-online.de/en-ersatzteile_main,15.html

€179.90*

6100/04 FG Turnbuckle left/right M8/40mm

Genuine FG spare/option part.steel version, 40 mm. Fits all FG except Formula 1.Contents:2 pieces

€12.50*

Similar products

y1218 Springs for drive shafts

Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

y1004 Driveshaft boots for ball drive + dogbones

Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces

€8.90*

y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*

y6107/02 Wheel squares 18 mm HART-COAT, 17 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)17 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 17 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€18.95*

y6107 Wheel squares 18 mm HART-COAT, 9,5 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)9,5 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 9,5 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€14.95*

y0897 Wheelie bar with suspension for 2WD + 4WD models - 1pce.

Wheelie bar with double ball raced wheel, cnc-machined from high strength alloy. The arm has a rubber suspension unit, the height is infinitely adjustable. The suspension allows for a maximum deflection of 30 degrees and is dirt- and mud-proof. The wheel bearings are sealed.The unit fits FG Monster Truck, Monster Beetle and Marder BigFoot, except for Monster Buggy Off-Road WB535 4WD. Installation on other models will be possible, but requires modifications to the chassis, mainly to accept the bolt pattern. The Carson Attack already has the correct pattern.

€89.90*

y6107/07 Wheel squares 18 mm HART-COAT, 12 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)12 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 12 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Content:2 pieces

€16.45*

y6479 HT rear alloy upright

€89.90*

7497/01 FG Rear brake 2WD/4WD

Genuine FG spare/option part. The set will shipped without gear carrier plate. Contents:1 set

€53.90*

y67577 Drive shaft 132 mm

Genuine HT spare/option part. Dimensions:Total length: approx. 132 mmLength center pin / center pin: approx. 123 mmShaft diameter: approx. 6 mmBall diameter: approx. 9,8 mmPlease note:If you own a Leopard 2WD with the old 130.5 mm driveshafts, the swap of both shafts is recommended.Contents:1 piece

€9.90*

y1064 Cable ties, black, 202 x 2.5 mm, 20 pcs.

For the secure installation of driveshaft boots.

€3.90*

67577 FG Drive shaft 134 mm

Genuine FG spare/option part. Please note: If you own a Leopard 2WD with the old 130.5 mm driveshafts (same part number), the upgrade of both shafts is recommended.Contents:1 piece

€19.90*