y1549/02 TT Beast Pro 300A 12S ESC with TT56112/520 520KV Brushless motor
€599.90*
% €669.90* (10.45% saved)Delivery time approx. 2 days
Product number:
y1549_02
EAN:
4058575137573
Supplies
Genuine ZTW spare/option part. For programming the ZTW Beast Pro 300A 12S ESC and 200A 8S ESC as well as for connection to a PC and for firmware updates of the esc.The Gecko software from ZTW on the PC is required for this: Specification:Length: 91 mmWidth: 54 mmHeight: 18 mmWeight: 68gPower supply: DC 5.0V - 12.0VContents:1 piece
Product information "y1549/02 TT Beast Pro 300A 12S ESC with TT56112/520 520KV Brushless motor"
y1549 ZTW Beast Pro 300A 12S ESC
Features:
- Enchanced throttle response, excellent acceleration, linearity and driveability
- Usind the advanced PC interface allows you to set up, program or update the firmware
- Fully Programmable via LCD program card, PC interface
- Adjustable BEC output 6.0/7.4V, up to 8A current output
- Multible protection features: Low voltage cut-off protection, over-heat protection and throttle signal loss protection
Specification:
- Continuous Current: 300A
- Burst Current: 1800A
- BEC: 6,0 V/7,4 V einstellbar / 8 A
- Battery NIXX / LiPo: 18 - 36NC / 6-12S LiPo
- Width: 74 mm
- Length: 115 mm
- Height: 78 mm
- Weight: 500g
- Programmable: Ja
- Waterproof: splash proof
TT56112/520Top Tuning Monster Brushless Motor 520kV
Specifications
- Max. amps: 129 A
- Max. voltage: 57 V
- Max. power: 7,350 W
- KV (RPM/Volt): 520 KV
- Mounting hole depth: 8 mm
- Bolt pattern: 4 x M4 at 30 mm pitch circle diameter
- Case diameter: 57.8 mm
- Case length: 112 mm
- Free shaft length: 30 mm
- Shaft diameter: 8 mm
- Weight: 1260 g
- Connector: 6.5 mm diameter
- Cable size: 8AWG
Features
- High quality bearings
- 4Pole rotor with high quality magnets
- Stator - super thin silicon steel layers
- Super strength 8 mm shaft
- CNC Aluminium heatsink case
- Copper wires with high temperature endurance
Contents:
- 1 set
Login
Accessories / Spare parts
Genuine ZTW spare/option part. For programming the ZTW Beast Pro 300A 12S ESC and 200A 8S ESC as well as for connection to a PC and for firmware updates of the esc.The Gecko software from ZTW on the PC is required for this: Specification:Length: 91 mmWidth: 54 mmHeight: 18 mmWeight: 68gPower supply: DC 5.0V - 12.0VContents:1 piece
Genuine rc-car-online spare/option part. Mounting bracket for installation of the ZTW 300A Beast esc in Losi 5ive-T and 5ive-B.Requires drilling of two holes for 5 mm screws into the chassis plate.Contents:1 piece
Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Fits BP70120 ZTW Beast Brushless motor 620 kV.Bolt pattern: 4 x for M4 screws on 30 mm pitch circleDistance center of motor / base plate: 37 mmContents:1 piece
Customers also bought
%
Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece
Genuine Top Tuning spare/option part. All aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 150 mm long und 50 mm wide. The battery tray accepts batteries up to 164 mm long, but the motor pinion limits the max. length of one battery to 155 mm.Rear motor clamps:
- Diameter 55,75 mm z.b. for Losi Spektrum 780 kV - Diameter 57 mm z.B. for Tenshock oder Castle- Diameter 57,8 mm z.B. for Leopard Baureihe 58- Diameter 60 mm z.B. for Lehner- Diameter 70 mm z.B. for BP70120 ZTW Beast Brushless Motor 620 kV
Please note: This set does not include Motor or ESCThis conversion kit is not intended for the 5ive-T 2.0, even though the installation in this vehicle would be feasible with some modifications (drilling and thread tapping required). The version for the 5ive-T 2.0 you can find here: TT1024. Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding ! Contents:Motor mount with your choice of rear clamp for 57 / 57.8 / 60 / 70 mm motor diameterBattery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop tapes4 hook-and-loop tapes to secure the batteriesaluminum mounting pedestals for the battery plate16T pinion with 8 mm bore diameterMounting screws
Genuine ZTW spare/option part. For programming the ZTW Beast Pro 300A 12S ESC and 200A 8S ESC as well as for connection to a PC and for firmware updates of the esc.The Gecko software from ZTW on the PC is required for this: Specification:Length: 91 mmWidth: 54 mmHeight: 18 mmWeight: 68gPower supply: DC 5.0V - 12.0VContents:1 piece
Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece
Similar products
%
Genuine ZTW spare/option part. The set includes ZTW Beast Pro 200A ESC and 56112/700 Top Tuning Monster Brushless Motor 700 kV.y1567 ZTW Beast Pro 200A ESC:Specification:Conzinous current: 200ABurst current: 1300ABEC: 6,0 V/7,4 V adjustable / 8 ABattery NIXX / LiPo: 8 - 24NC / 6-8S LiPoWidth: 55 mmLength: 90 mmHeight: 50 mmWeight: 407gProgrammable: JaWaterproof: JaSuitable Car: 1/5 Buggy/TruggySuitable car weight: 13kg 56112/700 Top Tuning Monster Brushless Motor 700 kV:Specifications:Max. Amps: 175AMax. Voltage: 42VMax. Power: 7.350WKV (RPM/Volt): 700KVMounting hole depth: 8 mmBolt pattern: 4 x M4 on each 30 mmCase diameter: 57,8 mmCase length: 112 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1260g
1/5 + 1/6 Scale Bigscale Off-Road CombiOriginal Standard equipment Losi DBXL-E 2.0 Genuine Spektrum spare/option part. Set contains:SPMXSE1160 Spektrum Firma 160 Amp Brushless Smart ESC 3S-8SSPMXSM1100 Spektrum Firma 780Kv Brushless MotorSPMXSE1160 Spektrum Firma 160 Amp Brushless Smart ESC 3S-8SProduct Features Smart all-in-one telemetry Fast, powerful 32-bit ARM M4 processor Waterproof Multiple options for easy programming: Button programming Smart ESC Programming Box SmartLink USB Updating and Programmer application Multi-point protection: Over-current protection Automatic LiPo low-voltage cutoff Thermal protection Failsafe protection Developed and designed by Spektrum engineers, in partnership with the industry's leading ESC manufacturer Compact for easy installation in most applications Ready to install no soldering required Rugged plastic case with mounting tabs Aluminum heat sink for high efficiency Cooling fan Adjustable high-power BEC Firmware updatable through the Smart ESC Programming Box High heat-resistant IC connectors, backwards compatible with EC connectors SPMXSM1100 Spektrum Firma 780Kv Brushless Motor Key Features Heat sinking designed CNC aluminum housing 8S LiPo power capable High efficiency design High-quality 4-pole sintered rotors Includes 6.5mm gold plated bullet connectors Precision ball bearings and hardened steel 8mm shaft Contents:1 set
%
Genuine Top Tuning spare/option part. The set includes ZTW Beast Pro 200A ESC and 1090KV Brushless Motor.y1567 ZTW Beast Pro 200A ESC:Specification:Conzinous current: 200ABurst current: 1300ABEC: 6,0 V/7,4 V adjustable / 8 ABattery NIXX / LiPo: 8 - 24NC / 6-8S LiPoWidth: 55 mmLength: 90 mmHeight: 50 mmWeight: 407gProgrammable: JaWaterproof: JaSuitable Car: 1/5 Buggy/TruggySuitable car weight: 13kgTT5692 Top Tuning Brushless Motor 1090 kV: Specifications Max. amps: 195 A Max. voltage: 29 V Max. power: 5,200 W KV (RPM/Volt): 1090 KV Mounting hole depth: 8 mm Bolt pattern: 4 x M4 at 30 mm pitch circle diameter Case diameter: 57.8 mm Case length: 92 mm Free shaft length: 30 mm Shaft diameter: 8 mm Weight: 980 g Connector: 6.5 mm diameter Cable size: 8AWG Features High quality bearings 4Pole rotor with high quality magnets Stator - super thin silicon steel layers Super strength 8 mm shaft CNC Aluminium heatsink case Copper wires with high temperature endurance
%
Genuine ZTW / Leopard Hobby spare/option part. The set includes ZTW Beast Pro 200A ESC and 980KV Brushless Motor.TT5692/980 Top Tuning Brushless Motor 980 kV:Specification:Conzinous current: 200ABurst current: 1300ABEC: 6,0 V/7,4 V adjustable / 8 ABattery NIXX / LiPo: 8 - 24NC / 6-8S LiPoWidth: 55 mmLength: 90 mmHeight: 50 mmWeight: 407gProgrammable: JaWaterproof: JaSuitable Car: 1/5 Buggy/TruggySuitable car weight: 13kgTT5682/01 980KV 4-Poles Inrunner Brushless Motor:Specifications: Max. amps: 160 A Max. voltage: 30 V Max. power: 4,200 W KV (RPM/Volt): 980 KV Mounting hole depth: 8 mm Bolt pattern: 4 x M4 at 30 mm pitch circle diameter Case diameter: 57.8 mm Case length: 82 mm Free shaft length: 30 mm Shaft diameter: 8 mm Weight: 880 g Connector: 6.5 mm diameter Cable size: 8AWG Features:High Quality BearingsRotor-4Pole High Quality MagnetsStator-Super Thin Silicon Steels Super Strength 8mm ShaftCNC Aluminium Heatsink ShellCopper Wires Of High Temperature Endurance
Genuine Top Tuning spare/option part.This kit includes all required parts for converting a Losi 5ive-T 2.0 into an electric car.Contents:TT1024 Top Tuning Electric conversion kit for Losi 5ive-T 2.0y1531/01 ZTW Beast Pro 200A ESC and 56112 ZTW Monster Brushless Motor 700 kV Genuine Top Tuning spare/option part. All aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 164 mm long und 50 mm wide. Rear motor clamps:Diameter 57 mm i.e. for Tenshock or CastleDiameter 57,8 mm i.e. for Leopard 58 lineDiameter 60 mm i.e. for LehnerDiameter 70 mm i.e. for BP70120 ZTW Beast Brushless engine 620 kVThis conversion kit is for the 5ive-T 2.0 only. It even allows for running the big BP70120 ZTW Beast Brushless motor in combination with mechanical brakes! The center diff will be turned around between its mounting pillars for installation.Contents:Motor mount with your choice of rear clamp for 57 / 57.8 / 60 / 70 mm motor diameterBattery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop bands4 hook-and-loop bands to secure the batteriesaluminum mounting pedestals for the battery plate17T pinion with 8 mm bore diameterMounting screws
Specification y1567 ZTW Beast Pro 200A ESC: - Conzinous current: 200A
- Burst current: 1300A
- BEC: 6,0 V/7,4 V adjustable / 8 A- Battery NIXX / LiPo: 8 - 24NC / 6-8S LiPo - Width: 55 mm
- Length: 90 mm
- Height: 50 mm
- Weight: 407g
- Programmable: Ja
- Waterproof: Ja
- Suitable Car: 1/5 Buggy/Truggy
Suitable car weight: 13kg
Specifications
56112 ZTW Monster Brushless motor:Max. Amps: 175AMax. Voltage: 42VMax. Power: 7.350WKV (RPM/Volt): 700KVMounting hole depth: 8 mmBolt pattern: 4 x M4 on each 30 mmCase diameter: 57,8 mmCase length: 112 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1260g Alternative:y1549/01 ZTW Beast Pro 300A 12S ESC with BP70120 620KV Brushless motor: Genuine ZTW spare/option part. Features:Enchanced throttle response, excellent acceleration, linearity and driveabilityUsind the advanced PC interface allows you to set up, program or update the firmwareFully Programmable via LCD program card, PC interfaceAdjustable BEC output 6.0/7.4V, up to 8A current outputMultible protection features: Low voltage cut-off protection, over-heat protection and throttle signal loss protectionSpecification Y1549 ZTW Beast Pro 300A 12S ESC:Continuous Current: 300ABurst Current: 1800ABEC: 6,0 V/7,4 V einstellbar / 8 ABattery NIXX / LiPo: 18 - 36NC / 6-12S LiPoWidth: 74 mmLength: 115 mmHeight: 78 mmWeight: 500gProgrammable: JaWaterproof: splash-proofSpecifications 70120 ZTW Beast Brushless motor 620kV:Max. Amps: 200AMax. Voltage: 8-14SMax. Power: 10.000WKV (RPM/Volt): 620KVResistance: 0,0095Mounting hole depth: 8 mmCase diameter: 70 mmCase length: 120 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1730g Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding adapter cables! Features:High Quality BearingsRotor-4Pole High Quality MagnetsStator-Super Thin Silicon Steels Super Strength 8mm ShaftCNC Aluminium Heatsink ShellCopper Wires Of High Temperature EnduranceContents:1 set
Genuine Top Tuning spare/option part.This kit includes all required parts for converting a Losi 5ive-T, 5ive-B or Mini into an electric car.Contents:TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B and Miniand your choice of Motor and ESC: either y1531/01: ZTW Beast Pro 200A ESC and 56112 ZTW Monster Brushless Motor 700 kV or y1549/01: TT Beast Pro 300A 12S ESC with TT70120 620KV Brushless motor TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B and MiniAll aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 155 mm long und 50 mm wide. The battery tray accepts batteries up to 164 mm long, but the motor pinion limits the max. length of one battery to 155 mm.Rear motor clamp diameter 57,8 mmContents:Motor mount, rear clamp for 57.8 mm motor diameterBattery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop bands4 hook-and-loop bands to secure the batteriesaluminum mounting pedestals for the battery plate16T pinion with 8 mm bore diameterMounting screwsSpecification y1567 ZTW Beast Pro 200A ESC:Conzinous current: 200ABurst current: 1300ABEC: 6,0 V/7,4 V adjustable / 8 ABattery NIXX / LiPo: 8 - 24NC / 6-8S LiPoWidth: 55 mmLength: 90 mmHeight: 50 mmWeight: 407gProgrammable: JaWaterproof: JaSuitable Car: 1/5 Buggy/TruggySuitable car weight: 13kg Specifications 56112 ZTW Monster Brushless motor:Max. Amps: 175AMax. Voltage: 42VMax. Power: 7.350WKV (RPM/Volt): 700KVMounting hole depth: 8 mmBolt pattern: 4 x M4 on each 30 mmCase diameter: 57,8 mmCase length: 112 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1260gAlternative:y1549/01 TT Beast Pro 300A 12S ESC with TT70120 620KV Brushless Motor:Specification y1549 ZTW Beast Pro 300A 12S ESC:Continuous Current: 300ABurst Current: 1800ABEC: 6,0 V/7,4 V einstellbar / 8 ABattery NIXX / LiPo: 18 - 36NC / 6-12S LiPoWidth: 74 mmLength: 115 mmHeight: 78 mmWeight: 500gProgrammable: JaWaterproof: splash proofSpecifications TT70120 Top Tuning Beast Brushless motor 620kV:Max. Amps: 200AMax. Voltage: 8-14SMax. Power: 10.000WKV (RPM/Volt): 620KVResistance: 0,0095Mounting hole depth: 8 mmCase diameter: 70 mmCase length: 120 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1730g
%
y1549 ZTW Beast Pro 300A 12S ESC Features:Enchanced throttle response, excellent acceleration, linearity and driveabilityUsind the advanced PC interface allows you to set up, program or update the firmwareFully Programmable via LCD program card, PC interfaceAdjustable BEC output 6.0/7.4V, up to 8A current outputMultible protection features: Low voltage cut-off protection, over-heat protection and throttle signal loss protectionSpecification:Continuous Current: 300ABurst Current: 1800ABEC: 6,0 V/7,4 V einstellbar / 8 ABattery NIXX / LiPo: 18 - 36NC / 6-12S LiPoWidth: 74 mmLength: 115 mmHeight: 78 mmWeight: 500gProgrammable: JaWaterproof: splash proofTT70120 Top Tuning Beast Brushless Motor 620 kVSpecifications:Max. Amps: 200AMax. Voltage: 8-14SMax. Power: 10.000WKV (RPM/Volt): 620KVResistance: 0,0095Mounting hole depth: 8 mmCase diameter: 70 mmCase length: 120 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1730gFeatures:High Quality BearingsRotor-4Pole High Quality MagnetsStator-Super Thin Silicon Steels Super Strength 8mm ShaftCNC Aluminium Heatsink ShellCopper Wires Of High Temperature EnduranceContents:1 set
%
Genuine ZTW / Leopard Hobby spare/option part. The set includes ZTW Beast Pro 200A ESC and 980KV Brushless Motor.TT5692/980 Top Tuning Brushless Motor 980 kV:Specification:Conzinous current: 200ABurst current: 1300ABEC: 6,0 V/7,4 V adjustable / 8 ABattery NIXX / LiPo: 8 - 24NC / 6-8S LiPoWidth: 55 mmLength: 90 mmHeight: 50 mmWeight: 407gProgrammable: JaWaterproof: JaSuitable Car: 1/5 Buggy/TruggySuitable car weight: 13kg980KV 4-Poles Inrunner Brushless Motor:Specifications: Max. amps: 172 A Max. voltage: 30 V Max. power: 5,200 W KV (RPM/Volt): 980 KV Mounting hole depth: 8 mm Bolt pattern: 4 x M4 at 30 mm pitch circle diameter Case diameter: 57.8 mm Case length: 92 mm Free shaft length: 30 mm Shaft diameter: 8 mm Weight: 980 g Connector: 6.5 mm diameter Cable size: 8AWG Features:High Quality BearingsRotor-4Pole High Quality MagnetsStator-Super Thin Silicon Steels Super Strength 8mm ShaftCNC Aluminium Heatsink ShellCopper Wires Of High Temperature Endurance
%
Genuine FG spare/option part. 7902 FG Electric engine 1300KV BrushlessTechnical data:4.000W 14,8V (4S) Maxi: 193ARPM maxi: 30.000 rpmDimensions: 82 x 58 mmAxle: 30 x 8mmWeight: 880g7909 Brushless ESC 150ATechnical data:Voltage range: 2S-6S Li-Po (7.4 22V)BEC 6V/3ADimensions: 55 x 48 x 38 mmWeight: 185g Contents:1 set
Customers also viewed
%
y1549 ZTW Beast Pro 300A 12S ESC Features:Enchanced throttle response, excellent acceleration, linearity and driveabilityUsind the advanced PC interface allows you to set up, program or update the firmwareFully Programmable via LCD program card, PC interfaceAdjustable BEC output 6.0/7.4V, up to 8A current outputMultible protection features: Low voltage cut-off protection, over-heat protection and throttle signal loss protectionSpecification:Continuous Current: 300ABurst Current: 1800ABEC: 6,0 V/7,4 V einstellbar / 8 ABattery NIXX / LiPo: 18 - 36NC / 6-12S LiPoWidth: 74 mmLength: 115 mmHeight: 78 mmWeight: 500gProgrammable: JaWaterproof: splash proofTT70120 Top Tuning Beast Brushless Motor 620 kVSpecifications:Max. Amps: 200AMax. Voltage: 8-14SMax. Power: 10.000WKV (RPM/Volt): 620KVResistance: 0,0095Mounting hole depth: 8 mmCase diameter: 70 mmCase length: 120 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1730gFeatures:High Quality BearingsRotor-4Pole High Quality MagnetsStator-Super Thin Silicon Steels Super Strength 8mm ShaftCNC Aluminium Heatsink ShellCopper Wires Of High Temperature EnduranceContents:1 set
%
Genuine Top Tuning spare/option part. The set includes ZTW Beast Pro 200A ESC and 1090KV Brushless Motor.y1567 ZTW Beast Pro 200A ESC:Specification:Conzinous current: 200ABurst current: 1300ABEC: 6,0 V/7,4 V adjustable / 8 ABattery NIXX / LiPo: 8 - 24NC / 6-8S LiPoWidth: 55 mmLength: 90 mmHeight: 50 mmWeight: 407gProgrammable: JaWaterproof: JaSuitable Car: 1/5 Buggy/TruggySuitable car weight: 13kgTT5692 Top Tuning Brushless Motor 1090 kV: Specifications Max. amps: 195 A Max. voltage: 29 V Max. power: 5,200 W KV (RPM/Volt): 1090 KV Mounting hole depth: 8 mm Bolt pattern: 4 x M4 at 30 mm pitch circle diameter Case diameter: 57.8 mm Case length: 92 mm Free shaft length: 30 mm Shaft diameter: 8 mm Weight: 980 g Connector: 6.5 mm diameter Cable size: 8AWG Features High quality bearings 4Pole rotor with high quality magnets Stator - super thin silicon steel layers Super strength 8 mm shaft CNC Aluminium heatsink case Copper wires with high temperature endurance
%
Includes HT-Edition parts set worth over 150.- , consisting of::SPMX40002SRX Spektrum LiPo battery 2S, 7,4V 30CTT1000 Top Tuning high voltage 30 Volt switchy0558 HT Car Bag XXLWhen the original 5IVE-T was introduced the world of 1/5-scale off-road racing changed, and this iconic platform became one of the most successful and influential platforms to date. Now get ready for 2.0! The Losi 5IVE-T 2.0 BND: 1/5 4WD Gas Short Course Truck has all of the unrivaled performance of its predecessor and includes Bind-N-Drive technology, allowing you to pick the transmitter that best fits your lifestyle. The powerful Zenoah G320 32cc engine has been built specifically for the 5IVE-T 2.0.The revised chassis layout reduces the front drive shaft angle for improved durability and increased 4WD balance. Plus, the new rack style bellcrank steering assembly makes for easy Ackermann changes and overall improved steering geometry. Additional advances include an updated front hood, upgraded brakes, and hard anodized bleeder caps and shock bodies for improved shock performance. All this ensures the 5IVE-T 2.0 continues to reign supreme.Key FeaturesGenuine Zenoah G320 32cc engineInnovative Bind-N-DriveSpektrum SR6000T telemetry-ready receiverImproved bar style steering rack with adjustable AckermannImproved center differential orientationImproved drive line angleHeavy-duty brakesInnovative clutch mount with gear mesh braceTough steering and gas/throttle servo braceExtra-large 800cc capacity fuel tank What's in the Box?Losi 5IVE-T® 2.0 BND 4WD SCTSpektrum 6200A DSMR 6-Ch AVC Telemetrie receiverZenoah 32cc Gasoline Pull-Start EngineS900S 1/5 Scale Metal Gear Steering ServoS901T 1/5 Scale Metal Gear Throttle ServoWheel WrenchRod End/Shock End toolMulti WrenchSpark Plug WrenchBind PlugExhaust Gasket2.0mm, 2.5mm, 3.0mm, 4.0mm Allen WrenchesProduct Manual Dimensions Height: 181 mm Length: 965 mm Width: 520 mm Weight: 17 kg Needed to CompleteAppropriate Charger like DYNC0505WTransmitter / receiver eg: DX2E or serial receiver compatible e.g: DX6R87-92 Octane Gasoline2-Cycle Motul Oil e.g: y0813/02Gas can e.g: y0686Contents:1 piece
The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled. According to the installed fourwheel drive the models are easy to handle and to steer. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a Brushless ESC. This control can be regulated simply via transmitter or optionally via the program card.
All E-Power versions need for the final assembling LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length 150mm and a width of 50mm. Suitable 6mm gold contact plugs and sockets for the LiPo batteries are enclosed.
The Tarmac Buster tires are the ticket for asphalt, concrete, or even hard packed clay. Molded in HPI?s exclusive M Compound, the Tarmac Busters have an aggressive street tread pattern that delivers outstanding grip on the street. Sold in pairs, these tires are a direct replacement for the factory Baja 5B tires. You need the same tire insert as for the stock tires. The inserts are includet.Durchmesser x Breite / diameter x width 170 x 60 mm
Genuine Losi spare/option part.Dimensions:Motor length without shaft: 87,5 mmDiameter Motor: 57,8 mmDiameter of the shaft: 8 mmLength of the shaft: 27 mmContents:1 piece