Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B 1.0 and Mini

Product information "TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B 1.0 and Mini"

Genuine Top Tuning spare/option part.

All aluminum parts are made of 7075 alloy.
Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.
Accepts two batteries up to 150 mm long und 50 mm wide. The battery tray accepts batteries up to 164 mm long, but the motor pinion limits the max. length of one battery to 155 mm.

Rear motor clamps:


- Diameter 55,75 mm z.b. for Losi Spektrum 780 kV 

- Diameter 57 mm z.B. for Tenshock oder Castle

- Diameter 57,8 mm z.B. for Leopard Baureihe 58

- Diameter 60 mm z.B. for Lehner

- Diameter 70 mm z.B. for BP70120 ZTW Beast Brushless Motor 620 kV


Please note: This set does not include Motor or ESC

This conversion kit is not intended for the 5ive-T 2.0, even though the installation in this vehicle would be feasible with some modifications (drilling and thread tapping required). The version for the 5ive-T 2.0 you can find here:

TT1024.

Driving batteries with the following maximum dimensions can be installed:

  • Length: 165 mm
  • Width: 51 mm
  • Height: variable
The speed controller (ESC) requires EC8 connections or corresponding !

Contents:
  • Motor mount with your choice of rear clamp for 57 / 57.8 / 60 / 70 mm motor diameter
  • Battery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop tapes
  • 4 hook-and-loop tapes to secure the batteries
  • aluminum mounting pedestals for the battery plate
  • 16T pinion with 8 mm bore diameter
  • Mounting screws

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

TT1021/01 Top Tuning Motor mount
Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Bolt pattern: 4 x 30 mm pitch circle for M4 screwsDistance center of motor / base plate: 32 mmContents:1 piece

€24.90*

Average rating of 0 out of 5 stars

TT1021/02 Top Tuning Motor clamps
Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Available with the following diameters:Diameter 57 mm i.e. for Tenshock or CastleDiameter 57,8 mm i.e. for Leopard Baureihe 58Diameter 60 mm i.e. for LehnerDiameter 70 mm i.e. for BP70120 ZTW Beast Brushless engine 620 kV, requires the taller TT1021/01B Top Tuning Motor mount for ZTW Beast motorDiameter 55,75 mmContents:1 piece

€29.90*

Average rating of 0 out of 5 stars

TT1021/03 Top Tuning Motor mount base plate
Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Contents:1 piece

€29.90*

Average rating of 0 out of 5 stars

TT1021/04 Top Tuning Battery plate
Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Contents:1 piece

€54.90*

Average rating of 0 out of 5 stars

TT1021/05 Top Tuning Pedestal for battery plate
Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

TT1021/06 Top Tuning Bracket for hook-and-loop tapes
Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Contents:2 pieces

€16.90*

Average rating of 0 out of 5 stars

TT1021/07 Top Tuning electric Motor pinion nitrided hardened, 8 mm bore, module 1.5
Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece

€23.90*

Average rating of 0 out of 5 stars

TT1021/11 Top Tuning Cable hook-and-loop tape 20x420 mm
Genuine Top Tuning spare/option part. Dimensions:Length: 420 mmWidth: 20 mmContents:2 pieces

€10.90*

Average rating of 0 out of 5 stars

TT1021/12 Top Tuning Cable hook-and-loop tape 20x500 mm
Genuine Top Tuning spare/option part. Dimensions:Length: 500 mmWidth: 20 mmContents:2 pieces

€11.90*

Customers also bought

Average rating of 0 out of 5 stars

y1519 Complete screws/nuts/washer set for Losi 5ive-T + 5ive-T 2.0
Genuine rc-car-online spare/option part. Komplete set of screws, nuts and washers for the Losi 5ive-T and 5ive-T 2.0.The set includes a total of 481 screws, in different quantities which are all used on the Losi 5ive-T.14 sizes of cap head screws12 sizes of CSH screws21 sizes of button head screws6 sizes of set screws5 sizes of washers4 sizes of self-locking nutsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:2 piecesM2,5x84 piecesM2,5x2020 piecesM3x1010 piecesM3x124 piecesM4x84 piecesM4x124 piecesM4x202 piecesM4x252 piecesM4x402 piecesM5x162 piecesM5x206 piecesM5x302 piecesM5x352 piecesM5x75Grub screws:7 piecesM3x310 piecesM4x54 piecesM4x84 piecesM5x64 piecesM5x404 piecesM8x16CSH screws in 10.9:16 piecesM4x1222 piecesM4x164 piecesM4x2024 piecesM4x256 piecesM5x1211 piecesM5x202 piecesM5x256 piecesM5x302 piecesM5x5010 piecesM6x162 piecesM6x208 piecesM6x25Safety washers:4 piecesM5Self-locking nuts:10 piecesM312 piecesM412 piecesM510 piecesM6Washers:10 piecesM3,210 piecesM4,310 piecesM5,36 piecesM6,4Button head screws in 10.9:4 piecesM3x820 piecesM3x1010 piecesM3x124 piecesM3x204 piecesM4x84 piecesM4x124 piecesM4x166 piecesM4x2024 piecesM4x254 piecesM4x305 piecesM4x355 piecesM4x404 piecesM5x104 piecesM5x1611 piecesM5x206 piecesM5x308 piecesM5x354 piecesM5x404 piecesM6x164 piecesM6x204 piecesM6x30

€44.90*

Average rating of 0 out of 5 stars

LOSB5800 Losi Body clips for 5ive-T/2.0, TLR 5ive-B and Mini
Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini. Content:2 x body clip approx. 1.4 mm wire diameter and 85 mm toal length6 x body clip approx. 1.4 mm wire diameter and 25 mm toal length12 x body clip approx. 2.0 mm wire diameter and 43 mm toal length

€9.99*

Average rating of 0 out of 5 stars

TT1021/02 Top Tuning Motor clamps
tt_tt1021_02 Version: TT1021/02A - Diameter 57 mm
Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Available with the following diameters:Diameter 57 mm i.e. for Tenshock or CastleDiameter 57,8 mm i.e. for Leopard Baureihe 58Diameter 60 mm i.e. for LehnerDiameter 70 mm i.e. for BP70120 ZTW Beast Brushless engine 620 kV, requires the taller TT1021/01B Top Tuning Motor mount for ZTW Beast motorDiameter 55,75 mmContents:1 piece

€29.90*

Average rating of 0 out of 5 stars

AT-5T005 ATOP Aluminum axle extenders Losi 5ive-T/2.0/B, Mini, with closed nuts
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP RC, increase track width for 25 mm and allow for the use of HPI 5T, Losi 5ive-T, 5ive-B and Mini rims. 5 mm o-rings protect against drive pin loss. Set of four inclusive o-rings, drive pins and closed wheel nuts (wrench size 24 mm!).Contents:1 set

€49.90*

Average rating of 0 out of 5 stars

TT1021/07 Top Tuning electric Motor pinion nitrided hardened, 8 mm bore, module 1.5
tt_tt1021_07 Version: TT1021/07A - Type A with 15 teeth
Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece

€23.90*

Similar products

%

Average rating of 0 out of 5 stars

TT1002 Top Tuning Aluminum rear a-arms Losi 5ive-B and Mini
Genuine Top Tuning spare/option part.Losi 5ive-B and Mini rear a-arms made by Top Tuning, machined from high grade 7075-T6 aluminum, with replaceable bushings. Made in Germany. The a-arms are identical for l/h and r/h side. Contents:2 x 7075 aluminum rear a-arm2 x set screw M8 x 252 x low height nut M82 x socket head screw M5 x 252 x socket head screw M4 x 20

€49.90* €79.90* (37.55% saved)
%

Average rating of 0 out of 5 stars

TT1001 Top Tuning Aluminum front a-arms Losi 5ive-B and Mini
Genuine Top Tuning spare/option part.Losi 5ive-B and Mini front a-arms made by Top Tuning, machined from high grade 7075-T6 aluminum, with replaceable bushings. Made in Germany. These a-arms are designed to work with the stock aluminum guide bushings (LOSB2074), which also serve to hold the C-hubs in the a-arms. The screws in the C-Hubs can therefore be tightened as usual, without binding the assembly. The supplied shims allow the adjustment of the longitudinal play to the tolerances of C-Hubs from different manufacturers. The a-arms are identical for l/h and r/h side. All necessary hardware included. Set of 2 top quality a-arms. Contents:2 x 7075 aluminum front a-arm2 x set screw M8 x 252 x low height nut M82 x socket head screw M5 x 252 x socket head screw M4 x 204 x shim 9 x 15 x 0.52 x shim 9 x 15 x 0.2

€49.90* €79.90* (37.55% saved)

Average rating of 0 out of 5 stars

TT1024 Top Tuning Electric conversion kit for Losi 5ive-T 2.0
Genuine Top Tuning spare/option part. All aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 164 mm long und 50 mm wide. Rear motor clamps:Diameter 55,75 mm i.e. for Losi Spektrum 780 kV Diameter 57 mm i.e. for Tenshock or CastleDiameter 57,8 mm i.e. for Leopard 58 lineDiameter 60 mm i.e. for LehnerDiameter 70 mm i.e. for BP70120 ZTW Beast Brushless engine 620 kVPlease note: This set does not include Motor or ESCThis conversion kit is for the 5ive-T 2.0 only. It even allows for running the big BP70120 ZTW Beast Brushless motor in combination with mechanical brakes! The center diff will be turned around between its mounting pillars for installation. Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding ! Contents:Motor mount with your choice of rear clamp for 57 / 57.8 / 60 / 70 mm motor diameterBattery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop bands4 hook-and-loop bands to secure the batteriesaluminum mounting pedestals for the battery plate17T pinion with 8 mm bore diameterMounting screws

€299.90*

Average rating of 0 out of 5 stars

TT1001/01 Top Tuning Plastic bushing 9 x 10 x 12
Genuine Top Tuning spare/option part.Spare bushings for the outer side of front Top Tuning 5ive-B aluminum a-arms TT1001.Contents:4 pieces

€4.90*

Average rating of 0 out of 5 stars

TT1001/02 Top Tuning Flanged plastic bushing 6 x 7 x 10
Genuine Top Tuning spare/option part.Spare bushings for the inner side of front and rear Top Tuning 5ive-B aluminum a-arms TT1001/TT1002.Contents:4 pieces

€3.90*

Average rating of 0 out of 5 stars

TT1003 Top Tuning rear 7075 aluminum chassis brace for TLR/Losi 5ive-B
Genuine TopTuning spare/option part.Rear chassis brace by TopTuning, made of high-strength 7075 aluminum; fits the new racing Buggy TLR/Losi 5ive-B only.The shape of the TLR 5ive-B rear brace with its much steeper angle compared to the 5ive-T and Mini makes the use of aluminum for this application particularly interesting. The standard plastic part cannot provide the desired dimensional stability in the long run. The material strength and temperature resistance of aluminum offer a significant advantage.Inclusive two mounting screw M5 x 14 mm.Contents:1 piece

€24.90*

Average rating of 0 out of 5 stars

TT1001/1002 Top Tuning Aluminum a-arms front/rear Losi 5ive-B and Mini
Genuine Top Tuning spare/option part.TT1001 Top Tuning Aluminum front a-arms Losi 5ive-B and Mini:Losi 5ive-B and Mini front a-arms made by Top Tuning, machined from high grade 7075-T6 aluminum, with replaceable bushings. Made in Germany. These a-arms are designed to work with the stock aluminum guide bushings (LOSB2074), which also serve to hold the C-hubs in the a-arms. The screws in the C-Hubs can therefore be tightened as usual, without binding the assembly. The supplied shims allow the adjustment of the longitudinal play to the tolerances of C-Hubs from different manufacturers. The a-arms are identical for l/h and r/h side. All necessary hardware included. Set of 2 top quality a-arms. Contents:2 x 7075 aluminum front a-arm2 x set screw M8 x 252 x low height nut M82 x socket head screw M5 x 252 x socket head screw M4 x 204 x shim 9 x 15 x 0.52 x shim 9 x 15 x 0.2TT1002 Top Tuning Aluminum rear a-arms Losi 5ive-B and Mini:Genuine Top Tuning spare/option part.Losi 5ive-B and Mini rear a-arms made by Top Tuning, machined from high grade 7075-T6 aluminum, with replaceable bushings. Made in Germany. The a-arms are identical for l/h and r/h side. Contents:2 x 7075 aluminum rear a-arm2 x set screw M8 x 252 x low height nut M82 x socket head screw M5 x 252 x socket head screw M4 x 20

€149.90*

Average rating of 0 out of 5 stars

TT5013 Top Tuning complete Installation set for Losi 5iveT/B and Mini with original Losi Spektrum/ ESC
Complete set with all required installation parts!50% more power than aZenoah G320 engine! Spektrum Firma® 160 Amp Brushless SMART ESC The ESC is waterproof, completely programmable, and comes pre-wired with a high-current IC5 connector. The ESC will work with most sensorless brushless motors and is Li-Po and Ni-MH compatible. The SMART technology provides information like battery voltage, RPM, RX pack Voltage, and Speed directly from the ESC when used with the Spektrum Dashboard app. 50+ MPH Spektrum Firma 4-Pole 780Kv Brushless Motor The brushless ESC and motor provide wicked power with an 8s LiPo battery (not included) that will blaze speeds of 50+ MPH. Perfect option for 1/5th scale models looking to run a 8S Lipo powered setup. Featuring a low cog 4-pole 8-magnet rotor design, CNC machined aluminum housing with heat sinking fins, insulated high purity copper windings, high-quality alloy steel 8mm output shaft, and high-precision bearings for high durability and smooth rotation. Preinstalled with 6.5mm gold plated bullet connectors. Perfectly matched to the Firma 160 Smart ESC. FAST, POWERFUL M4 PROCESSOR The Firma ESCs' 32-bit M4 processor produces higher resolution signal input and more accurate motor output. TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B and MiniAll aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 150 mm long und 50 mm wide. The battery tray accepts batteries up to 164 mm long, but the motor pinion limits the max. length of one battery to 155 mm.This conversion kit is for the Losi 5iveT/B and Mini. The conversion kit for the Losi 5ive-T 2.0 has the order number TT5014 Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding adapter cables! Contents: SPMXSM1100 Spektrum Firma 780Kv Brushless Motor SPMXSE1160 Spektrum Firma 160 Amp Brushless Smart ESC 3S-8S Motor mount with your choice of rear clamp Battery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop bands 4 hook-and-loop bands to secure the batteries aluminum mounting pedestals for the battery plate 17T pinion with 8 mm bore diameter Mounting screws

€769.90*

Average rating of 0 out of 5 stars

TT1013 Top Tuning Shock tower front, Losi 5ive-T/2.0/ Mini and TLR 5ive-B
Genuine Top Tuning spare/option part.Light yet strong version due to reinforcement ribs.Contents:1 piece

€44.90*

Customers also viewed

Average rating of 0 out of 5 stars

TT1024 Top Tuning Electric conversion kit for Losi 5ive-T 2.0
Genuine Top Tuning spare/option part. All aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 164 mm long und 50 mm wide. Rear motor clamps:Diameter 55,75 mm i.e. for Losi Spektrum 780 kV Diameter 57 mm i.e. for Tenshock or CastleDiameter 57,8 mm i.e. for Leopard 58 lineDiameter 60 mm i.e. for LehnerDiameter 70 mm i.e. for BP70120 ZTW Beast Brushless engine 620 kVPlease note: This set does not include Motor or ESCThis conversion kit is for the 5ive-T 2.0 only. It even allows for running the big BP70120 ZTW Beast Brushless motor in combination with mechanical brakes! The center diff will be turned around between its mounting pillars for installation. Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding ! Contents:Motor mount with your choice of rear clamp for 57 / 57.8 / 60 / 70 mm motor diameterBattery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop bands4 hook-and-loop bands to secure the batteriesaluminum mounting pedestals for the battery plate17T pinion with 8 mm bore diameterMounting screws

€299.90*

Average rating of 0 out of 5 stars

TT1021/04 Top Tuning Battery plate
Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Contents:1 piece

€54.90*

Average rating of 0 out of 5 stars

TT1022 Top Tuning brushless conversion kit for Losi 5ive-T/B and Mini with motor and ESC
Genuine Top Tuning spare/option part.This kit includes all required parts for converting a Losi 5ive-T, 5ive-B or Mini into an electric car.Contents:TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B and Miniand your choice of Motor and ESC:-  8S Vision : Hobbywing Ezrun MAX5 250A ESC and 56112 ZTW Monster Brushless Motor 700 kV - 12S Vision+270€ : y1549/01: Hobbywing Ezrun MAX4 300A 12S ESC with TT70120 620KV Brushless motor TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B and MiniAll aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 155 mm long und 50 mm wide. The battery tray accepts batteries up to 164 mm long, but the motor pinion limits the max. length of one battery to 155 mm.Contents:Motor mount, rear clamp Battery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop bands4 hook-and-loop bands to secure the batteriesaluminum mounting pedestals for the battery plate16T pinion with 8 mm bore diameterMounting screws Hobbywing Ezrun MAX5 ESC 250A with Top Tuning 700KV Brushless Motor 8S: Specifications 56112 ZTW Monster Brushless motor:Max. Amps: 175AMax. Voltage: 42VMax. Power: 7.350WKV (RPM/Volt): 700KVMounting hole depth: 8 mmBolt pattern: 4 x M4 on each 30 mmCase diameter: 57,8 mmCase length: 112 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1260g Specifications Hobbywing Ezrun MAX5 ESC 250A: technical Data :Type: 1/5 Brushless Sensored Current (continuous/short): 250A / 1600A Input voltage: 6-12S LiPo BEC: 6V/7.4V/8.4V @8A (switch mode) Motor types: Brushless motors (with/without sensor) Motor limits: - 8S Lipo: KV &lt;= 1200 - 12S Lipo: KV &lt;= 800 56118 motor Fan: Yes, operated via the BEC Programming: LED programming card LCD programming box (G2) OTA programming module Separate programming connection Waterproof: Yes Output: 8.00mm Bullet Connector (female) Size: 94.5x59.4x50.9mm Weight: 428.5g Applications: 1/5 buggy, truck  Alternativ 12S: Hobbywing Ezrun 300A 12S Regler mit Top Tuning 620KV Brushless Motor: Technische Daten Regler ESC:Strom (dauer/kurz)300A / 2000AMotortyp:Sensor/Sensorlose Brushless MotorenMotorlimit:12S LiPo: kV <= 600 (70125er Größe)LiPo-Zellen:6-12SBEC:6V / 7.4V / 8.4V mit 10A (schaltbar)Lüfter:Ja (Versorgung über eingebautem BEC)Programmiereingang:Lüfter / PRG-EingangProgrammierung:LED Programmierkarte, LCD Programmierbox, OTA ProgrammiermodulGröße:125x85x61.7mmGewicht:775.4g Max. Amps: 175AMax. Voltage: 42VMax. Power: 7.350WKV (RPM/Volt): 700KVMounting hole depth: 8 mmBolt pattern: 4 x M4 on each 30 mmCase diameter: 57,8 mmCase length: 112 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1260gSpecifications TT70120 Top Tuning Beast Brushless motor 620kV:Max. Amps: 200AMax. Voltage: 8-14SMax. Power: 10.000WKV (RPM/Volt): 620KVResistance: 0,0095Mounting hole depth: 8 mmCase diameter: 70 mmCase length: 120 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1730g

From €599.90*

Average rating of 0 out of 5 stars

TT5013 Top Tuning complete Installation set for Losi 5iveT/B and Mini with original Losi Spektrum/ ESC
Complete set with all required installation parts!50% more power than aZenoah G320 engine! Spektrum Firma® 160 Amp Brushless SMART ESC The ESC is waterproof, completely programmable, and comes pre-wired with a high-current IC5 connector. The ESC will work with most sensorless brushless motors and is Li-Po and Ni-MH compatible. The SMART technology provides information like battery voltage, RPM, RX pack Voltage, and Speed directly from the ESC when used with the Spektrum Dashboard app. 50+ MPH Spektrum Firma 4-Pole 780Kv Brushless Motor The brushless ESC and motor provide wicked power with an 8s LiPo battery (not included) that will blaze speeds of 50+ MPH. Perfect option for 1/5th scale models looking to run a 8S Lipo powered setup. Featuring a low cog 4-pole 8-magnet rotor design, CNC machined aluminum housing with heat sinking fins, insulated high purity copper windings, high-quality alloy steel 8mm output shaft, and high-precision bearings for high durability and smooth rotation. Preinstalled with 6.5mm gold plated bullet connectors. Perfectly matched to the Firma 160 Smart ESC. FAST, POWERFUL M4 PROCESSOR The Firma ESCs' 32-bit M4 processor produces higher resolution signal input and more accurate motor output. TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B and MiniAll aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 150 mm long und 50 mm wide. The battery tray accepts batteries up to 164 mm long, but the motor pinion limits the max. length of one battery to 155 mm.This conversion kit is for the Losi 5iveT/B and Mini. The conversion kit for the Losi 5ive-T 2.0 has the order number TT5014 Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding adapter cables! Contents: SPMXSM1100 Spektrum Firma 780Kv Brushless Motor SPMXSE1160 Spektrum Firma 160 Amp Brushless Smart ESC 3S-8S Motor mount with your choice of rear clamp Battery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop bands 4 hook-and-loop bands to secure the batteries aluminum mounting pedestals for the battery plate 17T pinion with 8 mm bore diameter Mounting screws

€769.90*

Average rating of 0 out of 5 stars

y1587 Conversion kit to electric drive for Carson Wild Attack and HPI Baja 5B
The conversion kit contains all mechanical parts (no electric motor, esc and batteries) you need to convert a Carson Wild Attack or HPI Baja 5B to electric drive.Brushless motors from all common manufacturers with 56 - 58 mm diameter, about 100 - 115 mm motor can length, 700 - 850 KV and 8 mm output shaft will fit. We recommend the TT56112/700 Top Tuning Monster Brushless Motor 700 kV.For the esc,ZTW Beast 200A or other ESCs with similar dimensions and performance data are suitable.The battery box provides a total space of 180 x 84 x 50 mm for the batteries. Operation with 6S - 8S is recommended.The set contains: Battery and receiver box Complete aluminum motor mount Ball bearing for intermediate shaft Motor pinion Chassis struts and mounting plate for esc made of aluminum Extension cable for speed controller installation hardware Exploded view and assembly instructions

€269.90*

Average rating of 0 out of 5 stars

y1604 SPEED TEC CRANK Team-Edition Zenoah G290 Tuning engine
The SPEED TEC CRANK genuine Zenoah engine is optimized for performance by hand with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC Team Edition version modifications: Cylinder & case:Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust, intake is flow-optimized the case is specially matched with enlarged and flow-optimized cross section towards the ports Piston:Transfer port area optimized for flow and polished, weight reducedand the piston-roof is polishedCrankshaft:is adjusted, aligned and balancedFlywheel and ignition:Latest SPEED TEC CRANK SV ignition system for rc-car race engines with air baffles, a special balanced 62 mm diameter flywheel, modified ignition coil mount and special ignition system allows for the extremely fast revving of the SPEED TEC team edition engine and guarantees a significantly improved performance.The machined and more than 30% lighter than stock CRANK flywheel with fins on both sides contributes to the optimized engine cooling.Gaskets:Premium quality gaskets installed. Cylinder gasket installed using elastic gasket sealer.Isolator:Special matched and raised insulator Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€949.00*

Average rating of 0 out of 5 stars

TT1021/05 Top Tuning Pedestal for battery plate
tt_tt1021_05 Version: TT1021/05A - Type A
Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Contents:1 piece

€17.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency