y1441/02 Audi RS5 DTM polycarbonate rear wing with mounts

rc-car-online

€24.90*

Prices incl. VAT plus shipping costs

Available

Product number: y1441_02

EAN: 4058575065623

Product information "y1441/02 Audi RS5 DTM polycarbonate rear wing with mounts"

Genuine HT spare/option part.

Fits Audi RS5 DTM body shell.

Dimensions:

Length: 325 mm
Width: 60 mm
Distance between mounting holes: 130 mm
Material thickness: 2 mm

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

y1441/03 Audi RS5 DTM Flaps/winglets

Fits Audi RS5 DTM body shell.

€22.90*

Customers also bought

3259 FG Body set Street Truck 4WD

Genuine FG spare/option part. Former: "MB 1834" Truck. The set contains the main body, the driver's cab, the driver's cab side parts and the body screws.The rear bumper won't be delivered and has to be ordered separate. The set is delivered not painted.Dimensions:Length: 870mmWidth: 435mmHeight: 390mmWheelbase: 535mmContents:1 setPainting tips:

€269.10*

y0580 Mammoth Supergrip for 1/6 and 1/5 offroad cars glued

If you want a special combination of compounds please enter that information into the "note to us" form field at the end of the checkout process.Mammoth Supergrip for 1/6 and 1/5 offroad cars. Fits too for Formular 1 models!Parking lot / race tires for your offroad car.VersionWidthOuter diameterFront64 mm153 mmRear78 mm153 mmGlued on genuine FG rims (rear tires using extension rings), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring.Please note: based on experience we recommend against using other manufacturers rims and extensions. Since the Mammoth tires provide very good grip the rim and the bonding must withstand high loads. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The Mammoth Supergrip is available in in the following compounds: Super softSoftMediumHardFront tirey0581y0582y0583y0584Rear tirey0591y0592y0593y0594General recommendation:The dirtier the track or the lower the ambient temperatures, the stickier (softer) the rear tires should be.Hint regarding the front tires: 2WD cars should use them one or two grades harder then the rears. 4WD cars usually like the same compound all around.Of course, the softer the tire the higher the wear rate; and this applies to Mammoth Supergrip onroad tires as well.The tires have a special onroad thread pattern but will still provide ideal traction after the pattern has been worn out. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall.Prices per unit: FrontRearMammoth Supergrip:Pair44,90 EUR49,90 EURTire inserts:Pair13,00 EUR13,00 EURFG rim:Pair14,90 EUR14,90 EURFG extension ring:Pair--.-- EUR14,90 EURMounting:Pair13,00 EUR13,00 EURTotal Price 85,80 EUR 105,70 EUR = 191,50 EUR SETTotal for 1 pair each front and rear: 169,90 EUR================================Also suitable for:With the following wheel adapter: y1183 Rim adapter

€119.90* €169.90* (29.43% saved)

3279 FG Body Set FG Team Truck 2WD, 1 pce

New FG Race Truck Body made of clear polycarbonate, not painted. The body consists of two parts. Suitable for FG Sportsline chassis 1:5 2WD and 4WD, 07 and Competition EVO 08 Chassis. Also fits other manufacturers' chassis with a wheelbase of 530mm.Painting tips:

€230.36* €255.95* (10% saved)

y0048 HT Alloy Ring Gear Adaptor 47/52/60 mm outside diameter

zahn_0011 Version: y0048/01 - 47 mm Ø small (38T)

Alloy ring gear adaptor for FG, Smartech, Carson and many other cars. Contrary to the stock plastic adaptor the aluminum version is secured by set screws.There are three sizes available:y0048/01 - 47 mm outer diameter, fits 38 tooth ring gearsy0048/02 - 52 mm outer diameter, fits 39/40/41/42/43/44 tooth ring gears - Weight: 29 grammsy0048/03 - 60 mm outer diameter, fits 46T and 48T ring gears - Weight: 31 gramms

€39.90*

y0022 HT Edge trim

Genuine HT spare/option part. Soft trim for body shell edges and cut-outs. Use speed glue for installation.Contents:1 piece / 3 metersPainting tips:

Content: 300 Zentimeter (€3.30* / 100 Zentimeter)

€9.90*

y0657 Receiver battery packs standard size, NiMh, 4500 mAh

y0657 Connector: y0657/01 Futaba, JR, MPX universal

Genuine HT spare/option part. 5 cells, 6 volt, cell size Sub-C. More applications on request.Dimensions: approx 112 x 46 x 23 mmContents:1 piece

€44.90*

Similar products

8147 FG Rear wing BMW 320si WTCC, Samba MOCA and BMW M3 Superstars

Complete with mounting kit, side flaps and nuts & bolts. The rear wing comes unpainted (clear). Dimensions wing:Width: 280 mmDepth: 45 mmDimensions wing mounts:Height: 28 mmDimensions side flaps:Width: 50 mmHeight: 30 mmPainting tips:

€26.90*

5164 FG Decal set Porsche 911 GT2-RS

Genuine FG spare/option part. Contents:1 piece

€49.90*

50053940 Lightscale carbon winglet for airfoil, 1 pce.

Winglet made of high quality and visually appealing carbon. The winglet is used for visual complement the Porsche and GT wing and effectively prevents air turbulences.

€8.90*

4152/01 FG Audi A4 DTM flaps

Genuine FG spare/option part. The set includes two pieces of white flaps with screws.Fits body shells 4149 and 4149_01.Contents:1 set

€12.90*

8183 FG Spoiler set BMW M3 ALMS, transparente 2 mm, 1 set

Item No.: 8183 Spoiler set BMW M3 ALMS, transparente 2 mm, 1 setContains only the Spoiler. If you need a complete body we advise .The spoiler is delivered not painted.

€34.50*

50052400 Lightscale rear wing center part, plastic with logo, 1 pce.

240 mm wide rear wing center part, spare part for the RS-5 Formula 1 wing. The weight is the same as the RS-5 carbon wing; but the Lightscale plastic wing is significantly tougher and cheaper to replace if necessary. You need Lightscale inserts # 50053930 for installation of the carbon side flaps.

€22.90*

52053930 Lightscale wing core insert

Wing core insert to connect the Lightscale wing body with side mount brackets or winglets. Set includes two inserts.

€15.90*

Mielke 6004 Carbon rear wing with angle profile

Available at last: the carbon rear wing for the Audi A4 body shell. Can be used for other body shells as well; please do your own measurements befor ordering!The set includes:1 x profiled carbon rear wing2 x brackets, l/h and r/h2 x backing plates to prevet ripping the body shell screwsWith complete l/h and r/h brackets, mounting hardware and backing plates which distribute the load over a larger area to prevent premature ripping of the mounting points.Size and weight:Total weight: 79 gramsOverall width: ca. 268 mmMounting hole bolt pattern: approx. 253 x 32 mmDepth: 60 mmContents:1 piece

€99.90*

y1562/01 Rear wing clear for body shell no y1562

Fits Porsche 911 body shell with the order number y1562.The rear wing will delivered clear and with mountings.Contents:1 piece

€29.90*

y1441/03 Audi RS5 DTM Flaps/winglets

Fits Audi RS5 DTM body shell.

€22.90*

10257 FG Wind guiding plate left/right for F1 - set

Genuine FG spare/option part.Fits formula 1 cars only.

€53.90*

50053960 Lightscale angle mount, plastic for plastic wing body

Genuine Lightscale spare/option part.Plastic angle mount, for connecting the plastic wing body to the brackets. Set of two angle mounts.Contents:2 pieces

€26.50*