y1415 MadMax Extreme 60/80 mm rim black with 18 mm or 24 mm drive wheel drives
Product information "y1415 MadMax Extreme 60/80 mm rim black with 18 mm or 24 mm drive wheel drives"
New highly reinforced MadMax rim with 18 mm square drive and optimized beadlock rings.
20-fold screwed very tough and suitable for all 1/6 &1/5 FG, Smartech and many more.
The MadMax Extreme rims are available for either 60 or 80 mm tire width.
They come with optimized inner and outer beadlock rings, 40 pieces of 2.5 mm allen head screws (for 2 mm allen wrench) and reinforcement rings around the wheel hex.
Our shop offers you the choice of economically priced sets of the following combinations:
20-fold screwed very tough and suitable for all 1/6 &1/5 FG, Smartech and many more.
The MadMax Extreme rims are available for either 60 or 80 mm tire width.
They come with optimized inner and outer beadlock rings, 40 pieces of 2.5 mm allen head screws (for 2 mm allen wrench) and reinforcement rings around the wheel hex.
Our shop offers you the choice of economically priced sets of the following combinations:
- y1415/01 one pair for approx. 60 mm wide tires
- y1415/02 one pair for approx. 80 mm wide tires
- y1415/03 one pair each for approx. 60 and 80 mm wide tires
Login
Alternatives
Alternatives
New highly reinforced MadMax rim with 24 mm hex drive and optimized beadlock rings.20-fold screwed very tough and suitable for all 1/6 &1/5 Carson Wild GP Attack, Losi 5ive-T or Desert Buggy XL and HPI cars.The MadMax Extreme rims are available for either 60 or 80 mm tire width.They come with optimized inner and outer beadlock rings, 40 pieces of 2.5 mm allen head screws (for 2 mm allen wrench) and reinforcement rings around the wheel hex.Our shop offers you the choice of economically priced sets of the following combinations:y0761/01 one pair for approx. 60 mm wide tiresy0761/02 one pair for approx. 80 mm wide tires y0761/03 two pairs for approx. 60 mm wide tires y0761/04 one pair each for approx. 60 and 80 mm wide tires
Accessories / Spare parts
Accessories / Spare parts
Genuine HT spare/option part. Hardened special screws for mounting the beadlock rings of MadMax and Losi DBXL rims.For HPI rims due to the screw head diameter only to be used in combination with non-HPI beadlock rings (i.e. MadMax or Losi 5ive-T)!The combination of larger diameter and substantially larger thread depth ensures a secure grip of the screws in the plastic of the rims; the coarse thread also allows for quick assembly.The large head with T10 hexalobular drive distributes the load as wide as possible on the ring.The screws are galvanized for rust protection.Please note: it is not recommended to use the screws in rims which had previously M3 screws installed. With new rims or in exchange for M2.5 screws appropriate strength is ensured.Dimensions: Diameter: 3,1 mmLength: 12 mmHexalobular drive: T10 (Torx) Content:1 Set of 40 screws for one pair of rims.
Kunden haben auch gesehen
Kunden haben auch gesehen
New highly reinforced MadMax rim with 18 mm square drive and optimized beadlock rings.20-fold screwed very tough and suitable for all 1/6 &1/5 FG, Smartech and many more.The MadMax Extreme rims are available for either 60 or 80 mm tire width.They come with optimized inner and outer beadlock rings, 40 pieces of 2.5 mm allen head screws (for 2 mm allen wrench) and reinforcement rings around the wheel hex.Our shop offers you the choice of economically priced sets of the following combinations:y1415/01 one pair for approx. 60 mm wide tiresy1415/02 one pair for approx. 80 mm wide tiresy1415/03 one pair each for approx. 60 and 80 mm wide tires
Variants from €29.90*
The 20-amp Bigscale switch allows for a maximum input voltage of 30 volt. It is specifically designed as a receiver switch for use in combination with the Hitec HS-1000SGT servo and 4s receiver battery y1304. Note: the electronic 20 amp Bigscale high voltage switch delivers the batterys full voltage. It does not replace a voltage regulator! The components which follow down the line (voltage regulator / servos / receiver) must be matched to this voltage! Using the latest MOSFET technology allows the 20 amp Bigscale high voltage switch to handle extreme loads, despite its small size. A blue LED status light clearly displays the activated mode. The 20 amp Bigscale high voltage switch is dust-and splash protected. He has an extremely low internal resistance and very low power consumption in off mode. Nevertheless it is recommended to unplug the battery when the model will not be used for an extended period. Properties:Voltage range: 3 to 30 VMax. Load: 20 ampsStandby consumption: 17 µAOperating temperature: - 15 ° C to +50 ° CCable length:Battery side 250 mmReceiver side 130 mmWeight: 13 gramsDimensions:Length: 28 mm Width: 12 mmHeight: 11 mm
The FID electric starter comes pre-assembled and suitable for all HPI Baja and Losi 5ive-T also 5ive Mini cars. With the FID starter unit you can start and stop the engine using your remote control system (a free channel is required!). We created detailed installation instructions which you can download here. We also translated a video tutorial which was made by FID.The transmitter must have a 3-position switch (preferred) or a linear control for the 3rd channel (start - run - stop)! We know that the following transmitters provide this option:Spektrum DX4C / DX4S / DX4R pro / DX3R pro / DX3CSanwa M12 / M11X / M11Futaba 4PLS, 4PK, T7PXThere may be other transmitters which meet these requirements. If in doubt, the appropriate transmitter's instruction manual should be consulted.If a transmitter provides only a two-position switch for the aux channel, you can still use the remote starter; however you have to go without the remote killswitch feature.From our current range of tuned pipes the Samba and Mielke fit the Losi; all pipes will fit the HPI. The genuine Losi pipe can be installed with some bending to the pipe's bracket!The installation with other tuned pipes may be possible, but it's necessary to check at your own discretion.Attention:Does not fit HPI Baja in combination with stock exhaust can and Losi 5ive-T AVC, 5ive Mini WRC, MTXL with stock air filter. Use Losi airfilter instead.Additional content of set FID046/01:Adapter cable (y1303/02)Screws and washersMounting bolts for the controller boxOf course, you will also find all for the FID starter unit in our online shop!
%
Completely mounted, with a 26 cm³ combustion engine and final speed of almost 100 km per hour, what else would you want?A further additional improvement is the installed front disk brake. A clear polycarbonate bodyshell is included.Quality and high-class equipment to a sensible price.Technical description of the Formula 1 Sportsline chassis:The undercarriage of the FG Formula 1 is built on a high-strength 5 mm alloy chassis. All chassis borings (screws) are countersunk. The front and rear axle with their various adjusting possibilities as king pin angle, trailing effect etc. consist of double delta wishbones. The double delta wishbones of the rear axle are supported by additional track rods which enable you a very fast set-up. All adjustments can be made without a dismounting of parts according to the fixed wishbone threaded rods with right-/left-handed thread.The model is equipped with 4 alloy oil-pressure shock absorbers. The push-rod suspension ensures the transmission between single wheel suspension and shock absorber.We deliver this chassis with a powerful 26 cc combustion engine. The engine's power is transmitted over a four-block Teflon clutch on a synchronous belt drive. This synchronous belt drive is also designed for a higher driving power. The BBS wheels and the tires are copies of the big models. All rotating parts are supported by ball bearings.The construction of the Formula 1 chassis is not identical with the other 1:5 scale FG models such as Merc. C-Class, Race Truck a.s.o. and therefore it can?t be converted into or from these models by a conversion kit.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 960 mmWidth: 440 mmHeight: 230 mmWheelbase: 620 mmFormular 1 models in action!
Replacement part for Mecatech twin piston hydraulic brake. The plate has a thickness of 3,3 mm.
Genuine FG spare/option part.Spare part for 10459.Contents:1 piece