y1247, Hobbythek/GPM Dirt-Cover Line for Carson Wild Attack, HPI Baja 5B models, set

€39.90*

Available

Set

Product number: y1247

Product information "y1247, Hobbythek/GPM Dirt-Cover Line for Carson Wild Attack, HPI Baja 5B models, set"

Normal retail price: 51,80 EUR for the set.

The set is suitable for all Carson Wild GP Attack, Gas Devil, Hell Devil, CRT 4x4, Smartech Thunderbolt and HPI Baja 5b models.

Included in the scope of delivery:

- GPM Air Filter Cover, No. BJAFCO

- GPM Starter Cover, No. BJPSCO

- y0515 GPM Shock-Cover

y0515 GPM Shock-Cover

These protective covers for the shock absorbers keep dirt away from the piston rods and seals. This significantly increases the service life of these parts.

Set of 4 pieces

GPM air filter cover, no. BJAFCO

GPM air filter cover, the pre-filter cover is simply slipped over the existing air filter. An elasticated band at the bottom secures the cover to the filter. The maintenance intervals for the main filter are extended enormously, especially in very dusty environments. Suitable for almost all standard filters, both foam and K&N.

1 piece

GPM Starter Cover, No. BJPSCO

The ‘air filter’ for the pull starter, prevents the starter from becoming clogged with dirt or grass. Also improves engine cooling when riding on grass, as less grass gets into the cooling air duct. Easy to fit using Velcro tape. With metal cable guide.

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

y1249 GPM No. 15, Steel pinion 17t and 18t, profile regraded

Regular price: 54,80 EURSteel pinion set with one each 17T and 18T pinion.The GPM steel pinions are profile regraded. This allows for a change in gearing by a pinion swap alone. Module: m=1.5Profile regraded means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€44.90*

y0513 GPM Set No. 13, Clutch bell, Steel pinions 17T and 18T

Complete set with clutch bell and one each 17T and 18T steel pinion.GPM clutch bell with 5 mm pinion bolt. CNC-machined one-piece bell for absolute true running. Inclusive mountings.GPM 17T and 18T steel pinions are profile regraded. This allows for a change in gearing by a pinion swap alone.Module: m=1,5Profile regraded means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Content of delivery:GPM steel clutch bell SBJ613GPM steel pinion 17T SBJ017TGPM steel pinion 18T SBJ018TO

€89.90*

y0513/01 GPM Set Clutch bell, Steel pinions 16T and 18T

Complete set with clutch bell and one each 16T and 18T steel pinion.GPM clutch bell with 5 mm pinion bolt. CNC-machined one-piece bell for absolute true running. Inclusive mountings.GPM 16T and 18T steel pinions are profile regraded. This allows for a change in gearing by a pinion swap alone.Module: m=1,5Profile regraded means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Content of delivery:GPM steel clutch bell SBJ613GPM steel pinion 16T SBJ016TOGPM steel pinion 18T SBJ018TO

€89.90*

Customers also viewed

BJ057/TB Upgrade ball joints with R/L thread turnbuckle for GPM alloy a-arms rear upper HPI Baja / Carson Wild GP Attack.

Also suitable in combination with the standard plastic a-arms, these may need to be shortened by a few millimeters. Ball socket with M6 l/h female thread!Content: 2 ball joints with turnbucklesContent:2 pieces

€19.80*

BJ057/BE Replacement ball joints for GPM alloy a-arms rear upper HPI Baja / Carson Wild GP Attack.

Also suitable in combination with the standard plastic a-arms. Ball socket with M6 female thread.Content:2 pieces

€12.90*

C6015 Carson Dirt Attack Servo

Genuine Carson spare/option part. Water protectedAluminum heat sinkSpeed: 0.12 / 60° @ 6VTorque @ 6V: 135 NcmJR connector4.8 to 6VContents:1 piece

€35.99*

G011 Carson Body shell Wild GP Attack for HPI Baja 5B too painted

Genuine Carson spare/option part. Contents:1 set

€89.90*

305191 / s054045 Bevel gear 16T center Carson / Smartech 4x4

Genuine Smartech spare/option part.Module: m=1,5.Content:1 piece

€27.90*

85439 HPI Roll bar long

Genuine HPI spare/option part. Includes the Off-Road lights and the mounting accessories.Content:1 piece

€45.90*

Walbro carburetor WT603B / WT990 / WT813A / WT1107 / WT1048 / WT668C

7355/08 FG Carburetor type: Walbro WT603BStandard carburetor for Zenoah G230/260. Carb has integrated choke. Typ: Walbro WT603BHowever, we recommend using the WT668C instead of the WT603B.This also has a choke, but the manufacturing quality of the WT668C is better than the WT603B!Optional ball bearing of the throttle shaft can be selected from the shops menu.y1483 Walbro WT-1048 Racing carburetorPopular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.y1067 Walbro WT668C carburetorThe Walbro WT668C carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc.The Walbro WT668C features an integrated choke with lever and a throttle shaft linkage lever. Optional ball bearing of the throttle shaft can be selected from the shops menu.Alternative: Walbro 603B also with chokey0251 Performance carburetor with accelerator pump type: WT-813AWalbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15.88mm bore, 12.7mm venturi. Ready for installation with modified shaft already installed. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well. Optional ball bearing of the throttle shaft can be selected from the shops menu.7855 FG Carburetor type: Walbro WT990Standard carburetor for Zenoah G240, G270 and G290. Typ: Walbro WT990 Optional ball bearing of the throttle shaft can be selected from the shops menu.y1016/051 Carburetor WT1107 G320RCGenuine Zenoah spare/option part. Standard part fits Zenoah G320RC.Optional ball bearing of the throttle shaft can be selected from the shops menu.

€59.90*

Configure now