y1106/01 Aluminum ball joints with 5mm/M8 right-hand thread, 2 pieces
€14.90
Available
Product information "y1106/01 Aluminum ball joints with 5mm/M8 right-hand thread, 2 pieces"
Two balljoints 5mm/M8 right-hand thread
| The maintenance-free rod ends with the sliding contact surface combination steel/ bronze composite feature a spherical plain bearing with a brass outer ring which is lined with a layer of bronze web in to which PTFE with molybdenum disulphide has been rolled. | |
Dimensions:
- A = 5 mm
- B = M8 right
- C = 8 mm
- D = 17,5 mm
- E = 39 mm
Contents:
- 2 piece
Login
Customers also bought
Electrogalvanized M8 steel turnbuckles right/left available in different lengths.Order no.Length:6100/03M8 left/right36 mm6100/04M8 left/right40 mm7076/01M8 left/right54 mm6076/01M8 left/right61 mmy0988M8 left/right75 mmThe 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.
Genuine HT spare/option part.Two balljoints 5mm/M8 left-hand threadThe maintenance-free rod ends with the sliding contact surface combination steel/ bronze composite feature a spherical plain bearing with a brass outer ring which is lined with a layer of bronze web in to which PTFE with molybdenum disulphide has been rolled. Dimensions:A = 5 mmB = M8 rightC = 8 mmD = 17,5 mmE = 39 mmContents:2 piece
Genuine FG spare/option part.Counter nut for track rod, 3,8 mm thick.Part is delivered in silver or black color from vendor!Contents:2 pieces
Genuine FG spare/option part.Counternut for track rod, 3,8 mm thick.Part is delivered in silver or black color from vendor!Contents:2 pieces
Genuine HT spare/option part. For all Zenoah G230/240/260/270/290/320 / CY / Fuelie / PTTemperature and dimensionally stable. Thickness: 1,0 mm.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece
Customers also viewed
Genuine HT spare/option part.Two balljoints 5mm/M8 left-hand threadThe maintenance-free rod ends with the sliding contact surface combination steel/ bronze composite feature a spherical plain bearing with a brass outer ring which is lined with a layer of bronze web in to which PTFE with molybdenum disulphide has been rolled. Dimensions:A = 5 mmB = M8 rightC = 8 mmD = 17,5 mmE = 39 mmContents:2 piece
Genuine HT spare/option part. Two balljoints 5mm/M8 with four conical spacers, to replace FG #6029/1 + balls (Set content like FG 4429/1).Fits almost for all 1/5 and 1/6 scale cars.The maintenance-free rod ends with the sliding contact surface combination steel/ bronze composite feature a spherical plain bearing with a brass outer ring which is lined with a layer of bronze web in to which PTFE with molybdenum disulphide has been rolled. Contents:2 pieces
Genuine FG spare/option part.Steel taper disks, 3.5 mm thick, with a higher stiffness compared to alloy taper disks. Installation of these disks allows for larger operation angles of the metal ball joints and rose joints. You need two disks per joint.Contents:4 pieces
Genuine FG spare/option part.Counternut for track rod, 3,8 mm thick.Part is delivered in silver or black color from vendor!Contents:2 pieces
Pirate Desert Short Course Truck 1:7 4x4 6S Brushless RTRSpecial features:Painted and decorated polycarbonate body.Pre-installed 4-channel radio control system (2+2) 2.4 GHzFail-safe function (automatic switch-off in the event of radio failure).With deactivatable gyro to stabilize the vehicle on slippery surfacesProtective housing for the receiver.LED strip on the roof.Versatile tires for different surfaces, large diameter (140 mm).Front and rear axle differentials with gears in waterproof housings.Front and rear bumpersAll-wheel drive completely on ball bearingsReinforced drive for 6S LiPo supply.Technical data :Headlights/rear lights, indicator140 mm tires with fabric (space-savingDifferential + central bearing made of aluminumAluminum servo saverSteering servo with metal gears (18 kg)XT-90 battery connectorsBLACK aluminum chassisESC 150 Amp (6S)Reinforced wishbonesCentral aluminum reinforcementMulti-adjustable front and rear shock absorber mountsRear cardan shafts made of treated steelBrushless motor in 4274/2000 kV Adjustable aluminum motor mountQuick attachment of the battery pack with a strap4-wheel independent suspensionFront wishbone suspensionHomokinetic cardan shafts at the front made of steelAluminum wheel nutsDimensions :Length : 770mmWidth : 380mmHeight : 270mmWeight : 7400gWheelbase : 415 mmWheel diameter : 140x50 mmAdditional information :Minimum age : 14 yearsRequired accessories:2 x Lipo battery 3SchargerTransmitter batteries (4)Scope of delivery:Assembled short course model including electronics (battery not included)Instruction manual
High quality bit made from S2 steel by KS-Tools. Fits the Allen screw on the throttle lever of our ball raced carbs and the screws for the ball joints on GPM trailing arms SB014L.Content:1 pieces
Genuine FG spare/option part. Contents:2 piece