y0760 BigScale Rallye-Cross tires Typ 450 for FG and other, 2 pair/4 pcs.
Product number:
y0760
Product information "y0760 BigScale Rallye-Cross tires Typ 450 for FG and other, 2 pair/4 pcs."
Regular price for one pair: 39,90 EUR
Set with 2 pairs/4 pieces: 79,80 EUR
Glued on robust 6-spoke star wheels, with 6 ribbed reinforcement bars.
With 18 mm wheel square, suitable for most 1:5 / 1:6 RC cars, FG, Carson, etc.
Lane widening with 23 mm countersunk nut and 14 mm deep square drive for most models.
450 block sections 3.5 mm thick, provide a good grip, even on hard or slippery surfaces.
Due to the high-strength 14 mm tire shoulder, the cornering power of the Rallye-Cross 450 is high, despite the high profile of 3.5 mm, but without provoking a disproportionate overdrive of the model.
The large inner diameter of 114 mm the rim, as well as the position of the wheel allows on nearly all models to eventually mount a disc brake at the front, as well as rear wheels. The dimension of the inside edge of the rim to the wheel is 20 mm. The 18 mm, 6-braced wheel square of the Rallye-Cross 450 rim is 8 mm deep.
Measures of the Rallye-Cross 450 wheel/rim:
- Outside diameter: 162 mm
- Profile width: 62 mm
- Rim inside: 114 mm
- Tire shoulder: 14 mm
- Block profile: 3,5 mm
| Also suitable for: | |
 |  |
| With the following wheel adapter: y1183 Rim adapter | With the following wheel adapter: y0786 Rim adapter |
Login
Kunden haben auch gesehen
Kunden haben auch gesehen
Through mounting the new alum. wishbones the model is 7mm widened. The ball-type nipples are fixed slantwise in order to achieve a higher spring deflexion. The outline contour was modified to make a higher steering angle possible when the double servo saver is installed in the model. Suitable for the Leopard2 Competition.
If you want a different combination of compounds please enter that information into the "note to us" form field at the end of the checkout process.Mammoth Supergrip for 1/6 and 1/5 offroad cars. Fits too for Formular 1 models!Parking lot / race tires for your offroad car.VersionWidthOuter diameterFront64 mm153 mmRear78 mm153 mmGlued on genuine FG rims (rear tires using extension rings), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring.Please note: based on experience we recommend against using other manufacturers rims and extensions. Since the Mammoth tires provide very good grip the rim and the bonding must withstand high loads. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The Mammoth Supergrip is available in in the following compounds: Super softSoftMediumHardFront tirey0581y0582y0583y0584Rear tirey0591y0592y0593y0594General recommendation:The dirtier the track or the lower the ambient temperatures, the stickier (softer) the rear tires should be.Hint regarding the front tires: 2WD cars should use them one or two grades harder then the rears. 4WD cars usually like the same compound all around.Of course, the softer the tire the higher the wear rate; and this applies to Mammoth Supergrip onroad tires as well.The tires have a special onroad thread pattern but will still provide ideal traction after the pattern has been worn out. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall.Prices per unit: FrontRearMammoth Supergrip:Pair44,90 EUR49,90 EURTire inserts:Pair13,00 EUR13,00 EURFG rim:Pair14,90 EUR14,90 EURFG extension ring:Pair--.-- EUR14,90 EURMounting:Pair13,00 EUR13,00 EURPrices Total:85,80 EUR105,70 EUR / Set= 191,50 EURHT prices Total:82,70 EUR86,90 EUR / Set= 169,90 EURTotal for 1 pair each front and rear: 169,90 EUR================================Also suitable for:With the following wheel adapter: y1183 Rim adapter
Item N° 67210/04 Mini Pin S / OR tires, Leo wheel white, glued, 2pcs.Completely new revised and in important details improved Mini Pin Off-Road tires. The rubber material is more wear resisting, grip and traction were improved and the tire wall was reinforced to prevent a tearing of the rubber. The tire inserts are now stronger and therefore more wear resistant.The FG Mini Pin tires are especially well-suited for hard and rough ground. They give the model a lot of traction, driving stability and grip in curves. We recommend the M and S version in the front and the rear. The H version with slightly less grip can be used for the front axle. The tires are ready glued on the new Leo wheels. For the assembly you need the 12mm square wheel drivers (ItemN°. 06107/07).The glued tires are not suitable for the FG models Marder, Beetle, Off-Road Buggy and Monster models.
Genuine GRP spare/option part.Glued on GRP off-road disc rim with 18 mm square (für FG, Smartech & other) or 24 mm hex (for Losi, HPI + Co.). GRP is one of the leading manufacturers of 1/5 and 1/6er street; and with its current off-road tires MICRO and CROSS he has the optimal solution for all track conditions and surfaces. As a recommendation: The dirtier the track or the colder the weather, the more grippy (softer) the rear tire should be.Note regarding the front tires: For 2WD cars it should be one to two steps harder than the rear tire. On 4WD models, a tire combination with the same shore hardness front and rear is usually a good choice.Of course, as with all tires, it also applies to the GRP tires MICRO and CROSS: the softer the tire, the higher the wear.The MICRO tire is perfect for astro turf as well as carpet flooring; the CROSS version gives your off-road car the necessary grip on loose as well and firmer soil alike.The following classification should help you with the tire selection, even though it is certainly recommended to find the best possible tire for your individual setup by your own test drives on the track.GRP-MICRO GW90-P1 soft for astro turf/carpet tracks, in colder weather and low grip conditionsGRP-MICRO GW90-P3 medium for astro turf/carpet tracks, but at higher temperatures and good gripGRP-MICRO GW90-S1 soft for clay soil, on colder days and less grip on the trackGRP-MICRO GW90-S3 medium also suitable for natural terrain, at normal temperatures and good grip.GRP-MICRO GW90-S5 hard, for good to very good grip conditions and/or good weatherBut as already said: "The proof is in the pudding", which means that a GRP-MICRO-S tire can also prove to be the best on a specific astro turf track, depending on the tracks condition and weather! And, of course, vice versus with a GRP-MICRO P tire. This applies especially to race tracks with a mix of carpet/astro turf and sorts of natural soil surface sections.As with full scale racing, in RC-car races, the right selection of tires often decides on victory or defeat.Technical note: The outside shoulder of the tires is reinforced and is labeled "OUT" by GRP!Contents:2 pieces
Genuine HT spare/option part. The Maxi-Pin competition tire is particularly suitable for tracks with a hard packed surface, as well as for tracks with a higher percentage of carpeting. The tread is not extended into the tire?s sidewall to reduce the side bite of the Maxi-Pin tire; the car remains controllable on such challenging tracks, which makes this tire a must-have for your "tire box"! Since the Maxi-Pin tire has many fine pins for a high number of biting edges and a low tread depth for reduced flex work, depending on the track?s surfaceincreased tire wear may be expected. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.For wet conditions the soft compound is recommended, under normal condition the medium compound is usually your best choice.Content:Diameter: 155 mmWidth: 67 mmPrices of the components:Maxi-Pin tires: 39,90 EUR / pairMaxi-Pin tire inserts: 9,90 EUR / pairRims FG 6105/01: 14,90 EUR / pairGlue set y0067: 13,30 EURTotal EUR 78.80Ready mounted and glued 69,90 EUR / pair. Rim with 18 mm square drive.Contents:2 pieces / 1 pairAlso suitable for:With the following wheel adapter: y1183 Rim adapter