36 products found for "y1565"

rc-car-online - Home

y1565 Losi mechanical brake for 5ive-B/5ive-T 2.0 brushless incl. Losi HS901T Servo

Genuine Losispare/option part. Mechanical brake for retrofitting in an electric powered Losi 5ive-B or 5ive-T 2.0. An additional servo and a 3-channel remote control are required.If you run the maximum operating voltage approved for an ESC, there is a risk - especially in large scale cars - that under certain circumstances the reverse currents generated by the motor when braking will destroy the esc.For this reason, we recommend using a mechanical brake (as with gas powered vehicles).Please note that Reverse is no longer possible with this configuration!In the ESC settings, you must select the Forward/Brake operating mode. The brake by the controller must be deactivated or set to the lowest possible value. For this job a program card suitable for the ESC is usually required!Set includes: TLR252011 TLR Brake Disc, Pad and Screw Set 5ive-B LOSB3230 Losi Brake Cams & Bushings 5T, TLR 5ive-B and Mini LOSB5901 Losi Throttle/Brake Linkage Set 5T, TLR 5ive-B and Mini Servo mount for throttle / brake servoLosi Servo HS901T Contents:1 set

€199.90*

y1563 Wheel nuts for Dirt Attack

Genuine rc-car-online spare/option part. Contents:4 pieces

€5.90*

y1564 XT90 Charging cable

Genuine HT spare/option part.Charging cable for batteries with XT90 connector, length approx. 30 cm, silicone insulated cable with gold-plated connectors.Contents:1 piece

€8.90*

y1595 SpeedTec Teflon Crankcase gasket 0,5mm

Genuine SpeedTec spare/option part. For Zenoah G230/240/260/270/290. Advantages Extremely temperature resistant, up to 300°C Seals 100%, even without stickin Seal can be used several times No more slipping of cylinders or isolators! Contents:1 piece

€5.40*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1569 Low voltage buzzer with voltage test

Genuine HTspare/option part. The LiPo Voltage Checker provides a low voltage alarm for 28S cell counts.When the voltage is below the set value, an alarm will sound along with illuminating the red LED.The voltage checker will automatically detect the cell count when connected to the balance lead on 28S LiPo. SpecificationsInput: 1S (JST) and 28S (JST-XH) LiPo, Li-ION/LiMN/Li-FeUnit Voltage Display Range: 0.54.5 VTotal Voltage Display Range: 0.536 VTest Mode Voltage Range: 3.730 VAlarm Value Range: 2.73.8 V, including offDimensions: 3.9 cm x 2.4 cm x 0.9 cmContents:1 piece

€9.90*

y1515 AP adapter plates for 1001 Mecatech twin-piston in FG 2020

Genuine HT spare/option part. One each r/h and l/h adapter plate for installation of Mecatech twin-piston brake calipers on FG 2020 car uprights/spindles.Fits front and rear!Contents:1 x r/h adapter plate1 x l/h adapter plate4 x csh screw M3 x 10 mm

€19.90*

y1562 Porsche 911 body shell, Wheelbase 530 mm, clear

Fits on all standard width touring car chassis' with 530 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan.Rear wing available in the options menue. Replacement parts: 5192 FG Front Porsche 911 GTR3 R clear 5193 FG Rear Wing Porsche 911 GTR3 R clear Required body mounts:Mount front: FG 8418 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsDimensions:Length: 940 mmWidth: 415 mmHeight: 230 mmWheelbase: 530 mm Painting tips:

€199.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1556 SPEED TEC CRANK race ported top end set Chung Yang F270

Race ported top end set for Chung Yang F270.The SPEED TEC CRANK genuine Zenoah G290 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC CRANK version modifications: Cylinder: Adjustment of compressionEnlarged portsFuel management milledMachined and polished exhaust and intakeThe case is specially matched with enlarged and polished cross section towards the ports Piston: Weight reducedSkirt shortenedPiston above and below piston ring tapered and piston dome polished The set includes the following items: Performance-optimized cylinder and piston, piston ring, piston pin, piston pin circlips and cylinder gasket.To achieve the optimum performance gain of a SPEED TEC CRANK top end set, we recommend the use of a tuned pipe ().Contents:1 set

€259.90*

y1525 Universal screws/nuts/washer set for all FG vehicles

Complete universal set of screws, nuts and washers for all 1/5 and 1/6 scale FG vehicles (except Competition/Evo alloy models).The set includes a total of 309 screws, nuts and washers in different quantities.13 sizes of cap head screws8 sizes of CSH screws3 sizes of button head screws7 sizes of set screws6 sizes of washers3 sizes of self-locking nuts2 sizes of nuts9 sizes of self tapping screws3 sizes of CSH self tapping screws3 sizes of pan head screwsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:3 piecesM3x82 piecesM3x161 piecesM3x183 piecesM3x209 piecesM4x202 piecesM4x252 piecesM4x301 piecesM4x451 piecesM5x162 piecesM5x251 piecesM6x103 piecesM6x401 piecesM6x75CSH screws in 10.9:2 piecesM4x162 piecesM4x258 piecesM4x401 piecesM5x142 piecesM5x256 piecesM5x302 piecesM5x351 piecesM6x16Button head screws in 10.9:10 piecesM4x82 piecesM4x142 piecesM5x40Grub screws:2 piecesM4x305 piecesM5x52 piecesM5x164 piecesM5x252 piecesM5x302 piecesM5x408 piecesM6x6Washers:2 piecesM3,2510 piecesM4,215 piecesM5,33 piecesM6,410 piecesM4,23 pieces10x16x1Self-locking nuts:3 piecesM316 piecesM410 piecesM5Normal nuts:8 piecesM54 piecesM5Sheet metal screws DIN 7981 Torx:7 piecesM2,9x9,52 piecesM2,9x131 piecesM2,9x192 piecesM2,9x226 piecesM4,2x9,59 piecesM4,2x1314 piecesM4,2x1614 piecesM4,2x225 piecesM4,2x32Countersunk head senk sheet metal screws DIN7982 Torx:14 piecesM4,2x1348 piecesM4,2x162 piecesM4,2x32Button head screws DIN 7985 Phillips (Kreuzschlitz) Verz. 4.8:4 piecesM3x41 piecesM3x252 piecesM4x14

€44.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0565 RC-Tech Flexa Fix body shell glue

Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Content: 100 Milliliter (€109.00* / 1000 Milliliter)

€10.90*

y1568 FG Formula 1 F2000 body shell with individual red F1 painting incl. rear wing and glued front spoiler Single copy

Genuine FG spare/option part. The set includes: 10250/02 FG Body set F2000 1.5 mm 10254 FG Rear spoiler for F1 10455 Frontspoiler 10265/03 y0312 Decals Contents:1 set

€548.00*

y1585 Alloy Mount for Speed Tec CrankIgnition coil

Genuine Speed Tec spare/option part. Contents:1 piece

€44.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1465 Beadlock screws hexalobular drive (Torx) T10

y1465 Version: screws only

Genuine HT spare/option part. Hardened special screws for mounting the beadlock rings of MadMax and Losi DBXL rims.For HPI rims due to the screw head diameter only to be used in combination with non-HPI beadlock rings (i.e. MadMax or Losi 5ive-T)!The combination of larger diameter and substantially larger thread depth ensures a secure grip of the screws in the plastic of the rims; the coarse thread also allows for quick assembly.The large head with T10 hexalobular drive distributes the load as wide as possible on the ring.The screws are galvanized for rust protection.Please note: it is not recommended to use the screws in rims which had previously M3 screws installed. With new rims or in exchange for M2.5 screws appropriate strength is ensured.Dimensions: Diameter: 3,1 mmLength: 12 mmHexalobular drive: T10 (Torx) Content:1 Set of 40 screws for one pair of rims.

€6.90*

y1560 Gear box oil for Lightscale STD / STX Smooth differential, 50 ml

y1560 Version: y1560/02 - Medium

Genuine Lightscale spare/option part. Contents:1 piece / 50ml

Content: 50 Milliliter (€258.00* / 1000 Milliliter)

€12.90*

y1564/02 XT90-connector male / female

y1564_02 Version: y1564/02S - Male connector

Genuine HT spare/option part.Wählbare Versionen: y1564/02S - Male connector y1564/02B - Female connector y1564/02SB - One each male and female connectorContents:1 piece

€2.90*

y1564/10 XT150 Connectors

Genuine HT spare/option part.Set with two each male and female contacts and the corresponding housings.Contents:1 set

€6.90*

y1564/01 XT60 connector male / female

y1564_01 Version: y1564/01S - Male connector

Genuine HT spare/option part.Wählbare Versionen: y1564/01S - Male connector y1564/01B - Female connector y1564/01SB - One each male and female connectorContents:1 piece

€1.90*

y1564/13 Serial adapter EC8 to XT150

Genuine HT spare/option part.Adapter for connecting two batteries with EC8 connector in series to an esc with a single pair of XT150 connectors.Battery side with EC8 male, esc side with XT150 male for positive and female for negative.Allows the use of two batteries with EC8 connectors without soldering with the esc of the UFRC GX1.Contents:1 piece

€18.90*

y1564/19 No-wire EC5 Parallel Y-harness

Genuine HT spare/option part.Optional equipment part for Axial Jeep Wrangler 4WD 1/6.Space-saving no-wire adapter, just 57 mm long.Attention: both batteries must have almost identical voltages at the moment when connecting them for parallel operation! Both batteries freshly fully charged from the charger is the easiest way to do this.Ideally, two identical batteries should also be used.Contents:1 piece

€12.90*

y1564/12 JR/Futaba/Universal Patch cable

Genuine HT spare/option part.JR/Futaba/Universal female to female extension, Length approx. 10 cm.Useful for wiring of the receiver inside the UFRC GX1 RX-box or similar applications. Contents:1 piece

€3.90*

y1564/11 Charging cable XT150

Genuine HT spare/option part.Battery side with XT150 female for positive and male for negative.Contents:1 piece

€8.90*

y1564/14 No-wire adapter EC5 male to EC3 connector female

Genuine HT spare/option part.Space-saving no-wire adapter, just 50 mm long.Contents:1 piece

€6.90*

y1564/04 No-wire adapter EC5 male to XT60 female

Genuine HT spare/option part.Space-saving no-wire adapter, just 50 mm long.Contents:1 piece

€6.90*

y1564/08 No-wire adapter EC5 male to Traxxas female

Genuine HT spare/option part.Space-saving no-wire adapter, just 49 mm long.Contents:1 piece

€6.90*

36 products found for "y1565"

Filter products

rc-car-online - Home