24 products found for "y1004_01"

rc-car-online - Home

y1004/01 Driveshaft boots for ball drive and dogbones

Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt.For FG and Carson ball drives, fits standard dogbones as well.Content10 pieces

€34.90*

y1074/01 Rear wing Audi A4

Genuine HT spare/option part.Rear wing for Audi A4 cars, 278 mm total width x 53 mm height. Contents:1 set

€36.90*

y1104/01 Foldable maintenance tray for 1/5 and 1/6 cars

Genuine HT spare/option part. Foldable maintenance tray, ideal for 1/5 and 1/6 cars; even for heavy weight and high ground clearence cars like a Losi 5ive-T!Size folded:Width: 300 mmHeight: 315 mmDepth: 40 mmWeight 1 kgSize erected: Width: 300 mmHeight: 220 mmDepth: 210 mmContents:1 piece

€19.90*

y1404/01 MadMax GIANT GRIP tires for FG/Smartech and other (18 mm square drive)

GIANT GRIP 190 x 70 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 18 mm square drive and reinforced orange beadlock rings for FG, Smartech and many more.The GIANT GRIP provides giant traction through 96 about one cm² wide and 5 mm high strong lugs, getting ample grip even on loose surfaces like sand and soil.Due to the extreme strain caused by the GIANT GRIP tires the MadMax rim with reinforcement ring had to be optimized once more.The GIANT GRIP tires come with strong special tire inserts which allow to transfer the power without canting, even on heavy cars.Dimensions:Outer diameter: 190 mmTire width at bead 70 mmTread width 80 mmReinforced 18 mm square wheel driveThe MadMax Giant Grip tires use 60 mm wide rims ( y1415/01 or y0761/01).The video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!

From €64.90*

Details

y1004 Driveshaft boots for ball drive + dogbones

Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces

€8.90*

y1008 CFH gas

Genuine HT spare/option part. Propan/Butan gas mix for the torch above, similar units and cigarette lighters. Contents:1 piece / 100 ml

€3.50*

y1000-54 Mecatech brake line, 1 m

Dimensions:Inner diameter: 2 mmOuter diameter: 4 mmContents:1 piece

€4.00*

10044 FG Damper reversing left/right - 2pcs.

Fits formula 1 cars only.

€13.10*

10042 FG Wishbone mount

Genuine FG spare/option part.Fits formula 1 cars only.Contents:4 pieces

€12.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1007 CFH Diamant M50 gas torch

Genuine HT spare/option part. Powerfull high quality soldering torch with piezo igniter, runs on standard lighter gas. Great for removing bolts that have been installed using thread locking compound. Removable safety base for convenient hands-free operation., adjustable flameTechnical data:Flame temperature: approx. 1.300 °COperating temperature: approx. 650 °CTank capacity: approx. 26 g ButaneConsumption: approx. 20 g/hFlame adjustement: from 12 mm to 32 mmIgnition system: piezo ignition (like electronic lighters)Please note: due to shipment regulations the torch is not filled with gas when delivered!Contents:1 piece

€39.90*

10041 FG Rear axle carrier right - 1pce.

Fits formula 1 cars only.

€23.90*

y1000-53 Mecatech brake fluid, 50 ml

Replacement part for Mecatech twin piston hydraulic brake.Contents:1 piece / 50 ml

€8.90*

10044/01 FG Bushing for pushrod lever - 2pcs.

Fits formula 1 cars only.

€9.90*

10043 FG Reinforcing brace front/rear - 2pcs.

Fits formula 1 cars only.

€7.60*

10045 FG Rear Upright left/right - 2pcs.

€17.90*

10048 FG Clutch gilmer belt pulley 16 teeth

Genuine FG spare/option part. Fits formula 1 cars only.Contents:1 piece

€27.90*

ARA610049 ARRMA Ball Bearing 17x26x5mm for Outcast 8S

Genuine ARRMA spare/option part. Contents:2 pieces

€14.99*

10040 FG Rear axle carrier left - 1pce.

Fits formula 1 cars only.

€23.90*

ARA610048 ARRMA Ball Bearing 12x24x6mm for Outcast 8S

Genuine ARRMA spare/option part. Contents:2 pieces

€14.99*

y1009 Zenoah G240RC with Walbro carburetor WT 990

23 cm³ Zenoah engine for large scale cars!Please note: contrary to their new designation the displacement has not been increased! The outer dimension didn't change, so you don't need any additional parts for the engine swap!The engines feature the following improvements over their G230:Quantity of cylinder mounting bolts increased from 2 to 4Improved strength of crankcaseAdded additional bearing on the PTO (clutch) side of crankshaftRedesigned shape of cylinder finsDimension of air intake port is 5% widerContains internal fuel pump which increases acceleration from idle to wide open throttle.Removal of choke valve increases performance by increasing air flow to the carburetor Changed material of the insulator gasket to metal, which improves sealing performanceThe engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€274.90*

ARA610047 ARRMA Ball Bearing 6x16x5mm 2RS for Kraton / Outcast 8S

Genuine ARRMA spare/option part. Contents:2 pieces

€13.99*

TLR351004 TLR Aluminum Rear Chassis Brace, HA for 5ive-T/2.0 and Mini WRC

Genuine TLR spare/option part.Content:1 pieces

€49.99*

LOS251004 LOSI MINI WRC Front & Rear Cage Supports,Roof Cross Bar

Genuine Losi spare/option part. Contents:1 set

€34.99*

Details

HT Aluminum rear suspension conversion kit for Smartech UNO, Carson Attack / Super Attack / Gas Blaster / C5 / R5, 2WD , y1003, set

Alloy rear axle conversion kit for Smartech UNO and Carson Attack and Super Attack (not Evo!), Gas Blaster and C5; Smartech Spider and Ranger cars.Fits for:- C5 / On road / Touring car- C6 Attack- Touareg- Super Attack- Gas Blaster- Duratrax Firehammer- Spider- Big AttackThe set includes:- rear plate- differential mounts- lower a-arms- upper a-arms- installation hardware.Please note: must use inge pins 6075, also you need two packets turnbuckle 40 mm 6100/04.

€299.90*

24 products found for "y1004_01"

Filter products

rc-car-online - Home