For converting the FG Monster/Stadium Truck 535 2WD into a model with 4WD drive.The conversion kit contains all chassis parts and drive parts required for the conversion, except for differential grease.
Genuine FG spare/option part.The bodyshell is made from colored polycarbonate. The decal set is not included!Dimension:Width between the edges on the front axle: approx. 260 mmWidth between the edges on the rear axle: approx. 280 mmWidth in the middle: approx. 280 mmLength: ca. 660 mmContents:1 piece
Genuine FG spare/option part.Spare part for FG Monster Truck and Monster / Stadium Truck 2WD/4WDScope of delivery consists of the painted body shell (front and main section). The shop menu allows you to select different decal sets, roll bar and off-road light dummies.Dimensions:Length: 660 mmWidth: 290 mmHeight: 195 mmWheelbase: 460 mmWith some modifications also suitable for Smartech / Carson Monster Truck, Pick Up Truck, Comanche, Stadium Truck as well as Monster Beetle. New mounting holes must be drilled and the bottom area of the bed must be almost completely removed to keep the roll cage of the Carson Smartech car. Contents:1 set
Defects:The body shell has several small scratches.Dimensions: Length approx. 670 mm Width approx. 300 mm Height approx. 225.mm Wheelbase approx. 470 mm
Now, the legendary 1:6 FG Marder 2WD off-road buggy with Stadium tyres! Looks great and offers better handling characteristics. Thanks to the stadium tyres, the Marder is almost 100 mm wider and therefore much higher cornering speeds are possible. These tyres can also be driven on asphalt.Dimensions of the stadium wheels: Diameter 170 mm Width 90 mm Mounting square 18 mmThe electric powered version of the legendary Stadium Marder buggy is equipped with a powerful 1400kV brushless motor.Power supply: 2x2S Li-Po battery pack. In its entry level version 4S, the running time is about 15 minutes with lightning-accelerations and a top speed superior to the gas powered Marder one.In the 2x3S configuration, the E-Marder is a true rocket ship!You can select the car with complete RTR-equipment from the options menu.RTR equipmentRTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed.In the first place our 1:6 Off-Road Stadium Buggy stands for driving fun. Through the knobbed tires or with Slick tires (optional extras) the model can be driven cross-country, on a car park, simply just everywhere.The RTR version of the car includes servo, transmitter, receiver, transmitter / receiver and rechargeable batteries.2WD Off Road Stadium BuggyMachined 4 mm aluminum chassis plate with side guardsIndependent suspension with many options for adjustmentRoll cage, can be used as a carrying handle as wellClosed factory painted body shell with decals already appliedFlange rims with knobby tiresBrushless motor150A brushless ESCTwo locations for the batteries with hook-and-loop strapsDimensions:Length: 710 mmWidth: 510 mmHeight: 260 mmWheelbase: 470 mmWeight: 7,4 kgContents:1 pieceDrive:2WDMotorization:CurrentRTR:RTR to chooseScale:1/6
This stadium truck is the perfect model for the entry into the RC large scale sport. The model is fully assembled and can be equipped with an RC system in our shopping cart selection. It is optionally available with clear (for individual painting) or factory painted Lexan body shell. Limited Edition tune parts:2x 4492 Alu Querlenker hinten untenPreis: 55,70 EUR1x 4475/01 Rear alloy shock mountPrice: 96,10 EUR1x 6423 Gear protectorPrice: 20,70 EUR1x 6499 Alloy front shock towerPrice: 69,70 EUR4x 18001 Alloy a-armPrice: 131,60 EURBase price Stadium Truck Sportsline829,90 EURSurcharge Limited Edition tuning parts:373,80 EURSurcharge HT-Edition:281,40 EURRegular price Limited HT-Edition:1485,10 EURThe Stadium Truck comes top equipped as standard and also offers numerous choices for additional option parts to increase driving performance.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURAlloy spur gear carrierUse for 48T - 46 teeth spur gears.Value: 39,90 EURBall bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 217,30 EURProduct details:1/6 scale 2WD Stadium Truck with double wishbone independent suspension. 4 mm metal chassis plate. All holes on the underside are countersunkFuel tank and RC components are protected by the bevelled chassis>Adjustable toe-in/out on the front suspension>Adjustable camber on the rear suspension>4 large-volume oil pressure shocks absorbers with adjustable spring tension for a smooth ride. The secondary spur gears, differential gears and all drive parts are case hardenedThe stadium truck comes with a powerful 26cm³ FG 260 internal combustion engine. This requires standard 2-stroke gas/oil mix available at every gas station.With a tank capacity of 0.7 litres, a driving time of approx. 40 minutes is achieved.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery DimensionsLength: 730 mmWidth: 510 mmHeight: 360 mmWheelbase: 470 mm
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc.
Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 4WD:
Monster Truck, Monster Jeep, Monster Hummer, Stadium Truck, Stadium Jeep, Stadium Hummer, Off-Road Beetle Set contents:
Four long dampers with 5 mm mount in the upper damper caps. Damper feet one pair short, one pair long (4WD MT version). We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.
The bodyshell is made from colored polycarbonate.The decal set, the front section and the rear wing are not included!Length: 660 mmWidth: 290 mmHeight: 195 mmWheelbase: 460 mm
Genuine FG spare/option part. Suitable for all 1:6 2WD FG Off-Road models with Zenoah/Chung-Yang engine or for the E-Models. Fits Off-Road Buggy, Marder, Beetle and all Monster and Stadium 2WD cars.Not suitable for FG Leopard and WB535 models.Contents:1 piece
Complete set of four CRT stadium tires and rims, mounted and glued with tire inserts. Fits FG and Carson 1/6 scale cars.Tire diameter 170 mm, tire width 80 mm, 18 mm wheel square. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Also suitable for:With the following wheel adapter: y1183 Rim adapter
Newly developed tuning pipe with essentially more power in the acceleration range through longer manifold and bigger volume. Suitable for FG Stadium Truck and Off-Road Buggy 4WD.ATTENTION, not fits on FG Stadium Jeep!!
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).