Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

41120, FG Stadium Jeep body shell, red, for 2WD for WB535

Product information "41120, FG Stadium Jeep body shell, red, for 2WD for WB535"

The bodyshell is made from colored polycarbonate.

Length approx. 670 mm
Width approx. 300 mm
Height approx. 225.mm
Wheelbase approx. 470 mm

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y3006 rc-car-online decal sheet yellow
Genuine HT spare/option part. rc-car-online lettering with correspondig logo. All decals are cutted with a plotter. Dimensions:Sheet with car logos: 450 x 160 mmSheet with rc-car-online letterings: 450 x 140 mmContents:1 piece

€7.90*

Average rating of 0 out of 5 stars

40155 FG Vehicle decals Jeep, 1 set.
Decals for FG-JeepSheet dimensions:480 x 340 mm240 x 170 mm (2x)

€29.00*

Average rating of 0 out of 5 stars

12067 FG Side guards Jeep
Genuine FG spare/option part. Side guards for Monster and StadiumJeep. For decorative use only, not for protection.Contents:1 set

€25.90*

Average rating of 0 out of 5 stars

y0565 RC-Tech Flexa Fix body shell glue
Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Content: 100 Milliliter (€109.00* / 1000 Milliliter)

€10.90*

Average rating of 0 out of 5 stars

7058 FG Body screws with stop nuts, 15 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Set includes:15 x Allen head body screws M3 x 10 mm15 x Washers15 x M3 Hexagon nut

€6.60*

Average rating of 0 out of 5 stars

7058/01 FG Body screws Torx with stop nuts, 15 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Set includes:15 x Torx body screws M3 x 10 mm15 x Washers15 x M3 Hexagon nut

€6.90*

Similar products

Average rating of 0 out of 5 stars

54150/01 FG FG Monster Buggy WB 535 body shell, clear
Genuine FG spare/option part. Contents:1 piecePainting tips:

€127.95*

Average rating of 0 out of 5 stars

6155 FG Marder body shell Zenoah white
Genuine FG spare/option part. The FG Marder body shell is delivered white and without window gitter or decal set.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

€99.90*

Average rating of 0 out of 5 stars

58150/02 FG Rear spoiler Monster Buggy Pro Off-Road WB535 clear
Accessories for FG 58150 body shell Beetle 4WD.Contents:1 piecePainting tips:

€31.90*

Average rating of 0 out of 5 stars

26100/01 FG Body Monster / Stadium-truck 2WD/4WD white
Genuine FG spare/option part.Spare part for FG Monster Truck and Monster / Stadium Truck 2WD/4WDScope of delivery consists of the painted body shell (front and main section). The shop menu allows you to select different decal sets, roll bar and off-road light dummies.Dimensions:Length: 660 mmWidth: 290 mmHeight: 195 mmWheelbase: 460 mmWith some modifications also suitable for Smartech / Carson Monster Truck, Pick Up Truck, Comanche, Stadium Truck as well as Monster Beetle. New mounting holes must be drilled and the bottom area of the bed must be almost completely removed to keep the roll cage of the Carson Smartech car. Contents:1 set

€172.45*

Average rating of 0 out of 5 stars

6154/01 FG Body polycarbonate Fun Cross
Genuine FG spare/option part. Body shell is delivered white and without decal set.Measures:Length: 530 mmWidth: 300 mmHeight: 190 mmContent:1 piece

€130.50*

Average rating of 0 out of 5 stars

6155/03 FG Body polycarbonate Fun Cross Sport
Genuine FG spare/option part. Measures:Length: 530 mmWidth: 300 mmHeight: 190 mmContent:1 piece

€134.95*

Average rating of 0 out of 5 stars

6154/03 FG E-Marder body shell Zenoah
Genuine FG spare/option part. FG E-Marder body shell with decals but without window gitter.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

€143.95*

Average rating of 0 out of 5 stars

67160/01 FG Body Leopard 2 Comp., Leo 2020 2WD/4WD, (lenght +26mm), transparent, 1 pce.
Spare part for the Leopard 2WD/4WD Competition and FG LEO 2020 2WD.Painting tips:

€139.50*

Average rating of 0 out of 5 stars

67160/05 FG Body Leopard Sportsline, ready plastered
Genuine FG spare/option part.The bodyshell is made from colored (not painted!) polycarbonate and will be delivered without rear wing.The original FG decal set is included, ready pasted!Content:1 piece

€124.95*

Average rating of 0 out of 5 stars

54160/03 FG Body Monster Buggy Off-Road WB535 painted
Genuine FG spare/option part.Contents:1 piece

€199.90*

Average rating of 0 out of 5 stars

68150/01 FG Body shell Off-Road Buggy 4WD, clear - 1 pcs.
he bodyshell is made from clear unpainted polycarbonate and it´s only for 4WD models.Length 500 mmWidth 285 mmHeight 155 mmPainting tips:

€112.40*

Average rating of 0 out of 5 stars

36110 FG Body Monster-/ Stadium-Hummer H2 4WD yellow, 1 pce.
Yellow Hummer H2 body fits for Monster / Stadium Trucks.Length 660 mmWidth 290 mmHeight 195 mmWheelbase 460 mm

€149.90*

Customers also viewed

Average rating of 0 out of 5 stars

y0784/138 Painted Stadium Jeep body shell Camouflage
Defects:The body shell has several small scratches.Dimensions: Length approx. 670 mm Width approx. 300 mm Height approx. 225.mm Wheelbase approx. 470 mm

€259.90*

Average rating of 0 out of 5 stars

FG Monster Truck WB535 4WD HT-Edition
Our 4WD models are attractive and very popular. The wheelbase of the WB535 version is 40 mm longer. This modification improved the directional stability as well as further driving qualities significantly. Equipment of the modelAngled 4 mm alloy chassis with countersunk borings at the bottom, 4-wheel belt drive, belt drive cover, differential gear at front and rear axle with hardened bevel gearwheels, closed front axle housing, closed belt drive at the rear, adjustable double wishbones at front and rear axle, all driving parts and gearwheels made of case-hardened steel, adjustable servo saver, 4 adjustable oil-pressure shock absorbers, rear gear brake, alloy side plates, Monster tires with chrome-plated rims, polycarbonate body shell, decal set.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The model is equipped with a original 26 cm³ Chung-Yang (series engine) combustion engine with muffler and ready-for-use oiled filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-starter system the engine can be started without any difficulties.The pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.The RTR-version is delivered with assembled and preset radio control system and rechargeable batteries. to complete the non-RTR version all popular servos and radio control systems are suitable.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURDimension:Length: 780 mmWidth: 510 mmHeight: 350 mmWheelbase: 535 mm

From €1,279.95*

Average rating of 0 out of 5 stars

y1255/01 Alfa Romeo 156 WTCC RACING vehicle decal set
Car-specific decals for the Alfa Romeo 156 body shell # y1255.Dimensions:250 x 350 mm

€29.90*

Average rating of 0 out of 5 stars

9506 FG Evo 2020.2 Basic kit Version
The Basic Kit is particularly intended for persons switching and differs from the Evo 2020 by not including the following parts: Engine Tuned pipe Body shell Rear wing Wheels Innovations of the, according to the manufacturer FG, the race model EVO 2020 to be expected in September 2020 Competition-OnRoad RC car with the latest technical developments. Latest version Improved - in numerous details! Unique among the large scale models. New stabilizer bar construction front and rear. Ball stabiliszers or frame stabilizers can be used (accessories). 10 mm thick chassis made of T7075 aluminium with cut-outs for weights (also under the tank) and grooves in the front area. This allows the vehicle to be perfectly adapted to the track or the driver. The engine is now again bolted to the chassis for more stiffness. Optimally designed wishbones on front and rear suspension. Reinforced and with toe-in adjustability, which is performed via aluminum wedges. Front upper wishbone for more adjustment possibilities. All gears with fine pitch.Since 1997, i.e. since the beginning of the 1:5 RC car scene, FG Modellsport has been represented with team drivers worldwide at national and international competitions. With the Competition-EVO series, FG won most world championships and almost all European championships. Content10 mm T7075 aluminum chassis plateAir filter / AirboxFront and rear hydraulic brakesDifferentialLarge volume shock absorbers, black anodized

€2,899.95*

Average rating of 0 out of 5 stars

FG Elektric 4WD Monster-Truck WB535, ESC 150A and Brushless Motor 6S
No matter where you will set this model into action - you will always be right in front with the FG Monster-Truck 4E! The E stands for electric power, the 4 means fourwheel drive. Extremely fast, terrific torque and all this without any engine noise. The Model is equipped with a powerful Brushless Motor and a ESC.You can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. The control can be regulated simply via transmitter or optionally via a program card. For the final assembling you need LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length of 150mm and a width of 50mm. The model is delivered with the EC8 connector system.Dimensions:Length: 710 mmWidth: 510 mmHeight: 390 mmWheelbase: 535 mm

From €1,229.90*

Average rating of 0 out of 5 stars

8450/01 FG Front disk brake for 1:5, 1:6, Off-Road Buggy 2WD, all 4WD - set
Low priced retrofitable front axle disk brake for all FG 1:5, 1:6, Off-Road 2WD and all 4WD models. also suitable for the 2-damper front axle and the Mono-Shock axle. The disk brake prevents a breaking-out of the rear, has a very sensitive adjustment and is optically very effective. You are able to run this disk brake with the gas servo, but make sure the servo has a minimum regulating power of 6kg. We deliver the disk brake without uprights. Link to the part scout!Content 6020 8093 6105/05 8455 8457/02 8458 8459/01 8461 8461/01 8462/01 8462/02 8462/06 8462/07 8462/05 8463 8464/01 8465

€112.95*

Average rating of 0 out of 5 stars

32743 Layshaft pinion
cs_32743 Quality: Stock
Genuine Smartech spare/option part.Module: m=1,5.Content:1 piece

€27.90*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency