12 products found for "y1489"

rc-car-online - Home

y1489 spark plug gap tool

Genuine HT spare/option part.Low height design, allows for easy gap measurement and adjustment without damaging the electrodes.Gauge measures spark plug electrode gaps on gap plugs. Ramp style increments on the outside with a .020-.100 inches range.Use an electrode gap of about .030 for best results.Long lasting solid steel alloy.Contents:1 piece

€4.90*

y1439 Decal set for BMW M3 Superstars

Spare part for y1437 BMW M3 Superstar body shell.

€25.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1481 RC-Paint Spray Gun

Fits most spray cans from many manufacturers.Convert your spray can into a spray gun. The long-lever system of this handle makes using a spray can much more convenient and provides better flow rate control as well.No more dirty hands from paint work.Contents:1 piece

€9.95*

y1469 Sheet drill with protective cap, up to 14 mm

The perfect tool for drilling perfectly round holes without cracks into a body shell.The cap protects the extremely sharp and spiky tip, the convenient handle provides secure grip on the tool.Dimensions:For holes up to 14 mm diameterLength of tip: approx. 45 mmTotal length: approx. 132 mmContent:1 Piece

€24.90*

y1486 Threading die M12 x 1,25

Genuine HT spare/option part. Die for removing the remains of microencapsulation on the stock Traxxas X-Maxx wheel shafts.After a few tire changes microencapsulation becomes very hard. This will cause the risk of thread seizure and damage. Timely removal of the residues prevents this. A die holder is not required. Turning the die with bare hands will do the job easily.Contents:1 piece

€12.90*

y1189 Stadium wheels on disc rim, 2 pairs

Complete set of four CRT stadium tires and rims, mounted and glued with tire inserts. Fits FG and Carson 1/6 scale cars.Tire diameter 170 mm, tire width 80 mm, 18 mm wheel square. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Also suitable for:With the following wheel adapter: y1183 Rim adapter

€99.90*

y1389 Sealed ball bearing 12 x 28 x 7 mm

Fits Area DBXL clutch bell holder AREA-XL 003 and rear uprights AREA-XL 021. Both sides sealed (2RS) for increased dirt resistance. Does not fit stock parts!Content:Two pieces

€14.90*

y1419 Sintered steel clutch for Zenoah and many other engines from 23 cm³ to 32 cm³

Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!

€19.00*

y1449 Molded tire inserts green for 170 mm Ø HPI + Losi tires with 60/75 mm width

Medium firmness molded tire inserts with shaped shoulders and recesses to match the beadlock fittings.The medium shore hardness compound of the green colored top quality tire inserts provides optimal support for the tire's shoulder and allows for perfect rolling characteristics of the tire. The perfect tire insert for the HPI-Baja 5B series with 170 mm tire diameter is available in two widths.Replacement part for MadMax Multi Pin and Giant Grip tires.

€19.90*

TT1499 Top Tuning Safety Bag for LiPo batteries

Genuine Top Tuning spare/option part.For secure transport and storage of LiPo batteries. For batteries up to approx. 175 x 75 x 70 mm.Contents:1 piece

€12.90*

y1483 Walbro WT-1048 Racing carburetor

y1483 Version: y1483/01 WT-1048 Racing carburetor

Genuine Walbro spare/option part.Popular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.Contents:1 piece

€97.90*

y1482 Spring band clamps for tuned pipe connectors, 22 to 34 mm diameter range

y1482 Size / piece: y1482/06-5 Spring band clamps 27 - 29 mm+ 4.5EUR

Genuine HT spare/option part.Spring band clamps are self-clamping and can self-adjust to diameter changes due to temperature variations or properties of the tube material.With this feature of self-adjustment, spring band clams are ideally suited for hose connections between exhaust manifold and tuned pipe with their high temperature load.Unlike worm drive clamps with their relatively large adjustment range, spring band clamps must be selected closely related to their intended application. For this purpose, the outer diameter of the hose in the mounted state must be measured. The clamp, whose nominal diameter corresponds most accurately to the value determined, should be used.In the options menu you can select from sizes ranging from 22 to 34 mm and packs of one or five clamps.Contents:1 piece / 5 pieces

Variants from €0.99*

€5.49*

12 products found for "y1489"

Filter products

rc-car-online - Home