8060 FG Body shell BMW M3 E30 main part

€157.50*

Prices incl. VAT plus shipping costs

Available

Product number: fg_8060

EAN: 4058575110187

Product information "8060 FG Body shell BMW M3 E30 main part"

Genuine FG spare/option part.

Contents:

1 piece

Painting tips:

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessories / Spare parts

8063 FG BMW M3 E30 decal set

Genuine FG spare/option part. Dimensions: Decal 1 (main decal): approx. 500 x 300 mm Decal 2 (window decal): approx. 320 x 430 mm Decal 3 (window decal blue): approx. 250 x 85 mm Decal 4 (light decal): approx. 110 x 20 mm Contents:1 set

€74.70*

y0565 RC-Tech Flexa Fix body shell glue

Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Content: 100 Milliliter (€109.00* / 1000 Milliliter)

€10.90*

7020/06 Front bumper for Opel V8 and BMW E30

Genuine FG spare/option part.Suitable for Opel V8 and BMW E30.Dimensions:Length: 100 mmWidth: 370 mmContents:1 piece

€29.90*

Details

7152/01 FG Extended rear mount

Genuine FG spare/option part. Fits all touring cars and Porsche 530.( Not for Mini Cooper und Porsche 465/510.)Contents:1 piece

€19.90*

3014 FG Body mounts middle/rear

Genuine FG spare/option part. Contents:2 pieces

€17.90*

Similar products

8064 FG Roll cage set for BMW E30

Genuine FG spare/option part. Suitable for BMW E30.For the assembly the mounts FG no. 5013 and 8013 are required.Contents:1 set

€59.00*

8042/01 FG Rear wing support 2WD/4WD, 530, 1/5

Genuine FG spare/option part.Keeps the rear wing from bending downwards under high downforce.Contents:1 setFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€18.90*

8092 FG Shock fastening pin/set collar

Item N° 8092 Shock fastening pin/set collar.Black-finished steel pin. Fits for older Sportsline models, 4 mm diameter x 56 mm long.Comes with two 4 mm set collars, 8 mm outer diameter x 5 mm wide.

€5.50*

8042 FG Rear wing support 1:5

Genuine FG spare/option part. Keeps the rear wing from bending downwards under high downforce.Contents:1 piece

€18.90*

8077 FG Front body Alfa Romeo 156 WTCC - 1 pcs

Spare part for 8075 and 8075/01Painting tips:

€49.95*

8093 FG Brake cable bracket - 1pce.

Spare part for , , , , and .

€5.50*

8076 FG Body Alfa Romeo 156 WTCC 1,5mm - 1 pce.

Spare part for FG 8075/01.EFRA number: 5053/06.

€154.95*

8059 FG Body set BMW M3 E30, clear 2 mm

Genuine FG spare/option part. The body set contents the main part, front body and the rear wing. The body is clear.Required body mounts:Mount front: FG 7020/06 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsDimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mmContents:1 piecePainting tips:

€244.95*

8063/01 FG BMW M3 E30 Team decals

Genuine FG spare/option part. Contents:1 piece

€34.90*

8073 FG Body set Alfa Romeo 156 WTCC, 1 mm clear

Genuine FG spare/option part.The body kit is supplied without rear spoiler! Required body mounts:Mount front: FG 7020/10 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 8013 Body mounts Side body mount rear: FG 7014 Body mounts Measures:Length: 900 mmWidth: 400 mmHeight: 245 mmWheelbase: 535 mmContents:1 piecePainting tips:

€119.90* €179.50* (33.2% saved)

8025/01 FG Alloy roll cage D for Calibra - 2 pcs.

Suitable for Opel Calibra.Measures:Inside: 8,2 mmOutside: 10 mmLength: 200 mm

€16.00*

8024/02 FG Alloy roll cage C for Calibra - 2 pcs.

Suitable for Opel Calibra.Measures:Inside: 8,2 mmOutside: 10 mmLength: 150 mm

€14.40*

Customers also viewed

FG Fun Cross WB535 Buggy 4WD HT-Edition

This 1/6 scale 4WD Off-Road buggy has been strongly inspired by competition types. With its front and rear Leopard type suspensions, the Fun Cross allows the most extreme drives. Built on a 4mm aluminium chassis, closed belt drive, 2 differential gears, double wishbones at front and rear axle with many adjusting possibilities as well as large-volume oil-pressure shock absorbers for traction and optimal ground contact. The model is equipped with a powerful 26 cm³ combustion engine with tuning pipe and ready oiled air-filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version is delivered with assembled and preset 2.4 GHz radio control system and rechargeable batteries. To complete the non-RTR version are all popular servos and radio control systems are suitable. HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EUREquipment of the model:Powerful 26 cm³ engineTwo differentials4 mm thick chassisFour wheel independent suspensionsBig Bore dampersDimensions:Length: 700 mmWidth: 460 mmHeight: 310 mmWheelbase: 535 mmWeight: 10,4 kg

€1,199.95*

LOS350002/01 Losi Body shell set, clear, Super Baja Rey

Genuine Losi spare/option part. Contents:1 setPainting tips:

€219.90*

This product is currently not available.

Samba MOCA Cruze 1:5 TC body, painted

The body is cut out, painted but not drilled to fit all 1/5th scale (wheelbase 530/535 mm) touring cars. Samba has decided to produce a new touring car body to offer a new car from the WTTC series for the 1:5 drivers. Currently the most requested big scale body with optimal aerodynamics 1.5 mm material thickness. This is offered without a rear spoiler.The body consists of one part. Width front / rear: 392 mm. Contents: 1 pieceSee photos for scope of delivery and paintwork.

€349.00*

68265, FG A-arm, front lower 4WD, plastic, 2 pcs.

New version with more steering.

€23.90*

This product is no longer available.

y1440 Team Decals Post for BMW M3 ALMS

Team decal sheet, suitable for BMW 320si body shells with the order numbers: y1437.Team decal sheet includes the following manufacturers: Deutsche Post, Hankook, Sonax, Castrol, EDGE, Zollner, Sachs, Allgeier, H&R, Exide, GNB. Dimensions:Big decal sheet: 390 x 200 mmPost logo for the roof: 210 x 145 mmM3 rear wing lettering: 250 x 36 mmStripes: 400 x 73 mm

€34.90*

FG Raceline 2WD-530 with Audi RS5 body shell

The new Raceline FF 530 is a very powerful competition model at an affordable price.In some countries a new competition category has been established so that as many RC car drivers as possible can enter the competition cheaply.RACELINE FF 2WD 530 Especially for competition use!Features:Front upper POM* a-armsfront/rear lower POM* a-armsPOM front axle bracketPOM shock mounts front and rear5 mm chassis platedual large diameter disk brakealuminum differentialNew rear braceDrive optimizationFront and rear aluminum spindles/uprightsAdjustable aluminum servo saverAluminum gear plateAluminum spur gear carrierLarge-volume tuned pipe systemHomologated and large volume airbox and tuned pipe systemOne advantage of POM* is its high dimensional stability. That means that it hardly changes its shape. The polymer has very good sliding and wear properties. The plastic has high strength and rigidity as well as medium to high impact strength and hardness. Its advantages also include high resilience. A very low center of gravity of the vehicle ensures good driving behavior on the track, the servos are installed lying down to support this behavior.*Polyoxymethylene (POM for short) are high molecular weight thermoplastics. The colorless, partially crystalline polymers are mainly used for the production of molded parts by injection molding.Content:1 piece

From €1,949.95*

Configure now