Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

17 products found for "y0568"

Filter products

rc-car-online - Home

Average rating of 0 out of 5 stars

y0268 Steel pinion 13 teeth
Hardened steel pinion 13 teeth suitable for FG models, modul 1,5.

€29.90*

Average rating of 0 out of 5 stars

y0568 Bowden cable mount 1/5, 2 pcs.

€12.60*

Average rating of 0 out of 5 stars

y0518 Hobbythek service bag
Genuine HT spare/option part. Special fabric bag to protect engines, rc-plates or other expensive items. Large opening and pull-string closure.Size:Diameter 200 mmHeight 200 mmContents:1 pieceAccessories not included.

€7.90*

Average rating of 0 out of 5 stars

y0564 RC Tech Pipe Protect 400 ml
Genuine HT spare/option part. RC Tech Pipe Protect protects your exhaust against oil and rubber deposit while racing. A clean exhaust gives better resonance, which means better performance from your engine. Thanks to RC Tech Pipe Protect your exhaust system can evacuate the temperature better.Direction of useSpray a relatively thick layer of Pipe Protect from a close distance; +/- 15/20 cm on your new or just-cleaned and preferably polished exhaust pipe. After each ride clean the exhaust pipe with a clean cloth, if necessary slightly sprayed with some Pipe Protect. Treat the exhaust pipe again before each race.Contents:1 piece / 400 ml

Content: 400 Milliliter (€24.75* / 1000 Milliliter)

€9.90*

Average rating of 0 out of 5 stars

y0565 RC-Tech Flexa Fix body shell glue
Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Content: 100 Milliliter (€109.00* / 1000 Milliliter)

€10.90*

Average rating of 0 out of 5 stars

y0563 Alloy front shock tower for 4WD FG-Monster/Stadiuim/Beetle Leopard cars
Genuine HT spare/option part. Milled to reduce weight; replaces plastic part FG #66287/01. Comes complete with all necessary mounting hardware included.Fits Leopard Sportsline 2WD and 4WD.Scope of delivery:1x Alloy front shock tower4x Socket head cap screws 4x143x Countersunk screws 4x144x Washers steel 4,3Contents:1 piece

€79.90*

Average rating of 0 out of 5 stars

y0548 Hobbythek Polo Shirt, long sleeve "M", 1 pce.
Top quality polo shirts made from 100% combed cotton! With bright orange rc-car-online logo printed on front and back.Sizes available: M

€29.90*

Average rating of 0 out of 5 stars

y0668 Alloy engine mount big for 1:6 2WD Zenoah alloy
Genuine HT spare/option part. Big alloy engine mount suitable for FG 2WD 1/6 cars with CY / Zenoah G230/240/260/270 engine.Contents:1 piece

€64.90*

Average rating of 0 out of 5 stars

y0566 Replacement hook-and-loop tape for GPM starter cover and GPM Crankcase cover
Genuine HT spare/option part. For GPM starter cover and GPM Crankcase cover.Dimensions:Width: 8 mmLength: 400 mmContents:1 piece

€3.90*
%

Average rating of 0 out of 5 stars

y0658 Narrow-Grip 462 type tires for Losi, HPI, FG, Carson and Co., 18 mm square drive
Off-road tires for sandy underground! Gives great results on those carpets which are typical for some off-road tracks. 462 grippy square studs per tire, a total of more then 1800 for a complete set of tires, guarantee maximum traction! The lower profile of the outer stud rows reduces lateral traction and guarantee exceptional directional stability! Therefore the car is less prone to undesirable side rolls! The rim is the 6-spoke design with a steel reinforcement ring around the wheel drive. The NARROW-GRIP tires are available with either 18 mm square drive to fit FG & co. To prevent premature wheel drive wear the fit to the rim is very tight. Therefore the rim should be properly aligned with the square or hex drive and completely mounted via tightening the wheel nut! Dimensions:Outer tire diameter: 175 mmTire and rim width: 62 mmRim inner diameter: 119 mmWeight for one tire: 375 grams / for a pair: 750 gramshe manufacturer of the Narrow-Grip 462 indicates that the use of these tires on very heavy models, like the Losi 5ive-T under heavy conditions, such as jumps and shifting / tilting of the chassis, may lead to breakage of spokes or hex socket. Due to this notice that kind of failure will not be compensated. We apologize for this note!As an alternative, we recommend our special offer for the Losi 5ive-T OEM tires and in particular all tire combinations with MadMax EXTREME rims for FG, Smartech and Co.:y1400/01 - Tarmac Bustery1401/01 - Big Digger y1402/01 - Cross Bond y1403/01 - Over Lander y1404/01 - Giant Grip y1416/01 - Ultra Grip Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (18 mm square for FG Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable. Wheels drives:18 mm square for FG & co.Contents:2 pieces / 1 pair

€39.90* €59.90* (33.39% saved)

Average rating of 0 out of 5 stars

y0578, Alloy front shock tower for FG Sportsline and Off-Road 4WD, 1 pce.
Aluminum front shock tower for FG Off-Road Buggy and Sportsline 4WD, replaces stock plastic part FG #66287.Stock mounting hardware will be re-used.

€59.90*

Average rating of 0 out of 5 stars

y0558 HT Car Bag XXL for Losi 5ive-T/2.0, Mini 5ive WRC, Desert Buggy XL and many more
The XXL version is especially made for the Losi 5ive-T, Mini 5ive WRC, Desert Buggy XL; Arrma Outcast/Kraton; Axial Honcho, Traxxas X-Max/XRT; UFRC GR1/Big Bully. Of course, other 1/5 and 1/6 large scale cars will fit into this bag as well; however, in this case the XXL bag gives you plenty of room for additional accessories. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 100 cmWidth: 57 cmHeight: 39 cm

€59.90*

Average rating of 0 out of 5 stars

y1568 FG Formula 1 F2000 body shell with individual red F1 painting incl. rear wing and glued front spoiler Single copy
Genuine FG spare/option part. The set includes: 10250/02 FG Body set F2000 1.5 mm 10254 FG Rear spoiler for F1 10455 Frontspoiler 10265/03 y0312 Decals Contents:1 set

€548.00*
%

Average rating of 0 out of 5 stars

European Championship Touring Cars 2006 - Twin DVD, y0868
dvd_em_2006 System: PAL
This Double-DVD set, made by Chris Wright from the well known Rev-Up racing magazine, is in MPEG2 format which means it will play on any PC and most MAC computers with the appropriate software (PowerDVD, WINDVD and so on). He used multiple cameras to get this footage from different angles and positions on the track. It is is native wide screen format at 16:9 in PAL.Includes the opening ceremony, concourse, track view and trip, Greek dancers, hot laps by top drivers, four laps shown simultaneously of top drivers so you can compare styles etc, the all important first lap from different angles, pit walk and track stuff during the week, slow motion of all those rolls, loops, spins and crashes, both half finals and the main final, the prize ceremony. You also get a free bonus video of the 24 hours team race at Lostallo a few weeks ago.

€13.85* €27.70* (50% saved)

Average rating of 0 out of 5 stars

y0968 HT-Steel pinion 34 teeth Speedgear for Carson / Smartech 4WD cars
Genuine HT spare/option part. Nitrited steel spur gear, profile regraded, for combination with the stock 43T spur gear which goes on the clutch bell. This gives a numerically lower drive ratio and makes it possible to use standard diameter buggy tires on this car!Attention: The speedgear has the same diameter as the stock 37T gear and is therefore not compatible with the other 37T/40T HT tuning gears!Speedgear 34T: I=7,74Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter.Contents:1 piece

€44.90*

Average rating of 0 out of 5 stars

ARA330568 ARRMA Shock Cap, Collar & Cartridge Set for Kraton / Outcast 8S
Genuine ARRMA spare/option part. Contents:1 set

€21.99*

Average rating of 0 out of 5 stars

500205683 Carson Shock tower
Genuine Carson spare/option part. Fits CY-Eline models.Contents:1 piece

€24.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency