Typical features

• Low inner resistance with high MPV
• Higher energy density with lower weight
• Longer lifecycle under proper usage, up to 200 times
• For LiPo batteries, the peak amp rate is usually twice the continuous crate
• Can be charged with 5C when time is critical
• Recommended charge with 2 – 3C (max. 3C)

Spezification:

• Tension: 3S / 11,1V
• Capacity mAh: 3300
• Case: Soft
• Cable cross section: 12AWG/3,3
• Length +/- 5 mm: 135 mm
• Width +/- 1,5 mm: 45 mm
• Height: +/- 1,5 mm: 25 mm
• Weight +/- 10g: 280g
• Cont. current: 20C (115,5A)

Contents:

• 1 piece

1.1 First charge
When you receive the battery, please do not use it directly, but to fully charge it first with the specific LiPo balancer-charger.

1.2 Charger
Use specific LiPo balance-Charger only. Other types of charger are not recommended to charge the batteries.

1.3 Charging current
Never charge batteries with current over the maximum charging current wich was regulated by specifications (2-3C in general), strongly recommended shpuld not exceed 5C. Higher setting may lead to charging insufficiency, inferior in performance, heating and even leakage.

1.4 Charging voltage
Charging Voltage should be controlled around 4.20V and under any condition should not beyond the regulated limit voltage (4.25V/cell). As for battery pack in series, please choose balance charging or charge each cell respectively. Series charging is not recommended. If the charging voltage is too high or you choose series charging, over-charge may occur. All these may result in battery swelling, heating or even leakage, severely deteriorating batteries performance and cycle life.

1.5 Charging temperature
Batteries must be charged at a place within the temperature ranged from 15°C to 35°C, or it may lead to the reduction of charging and discharging efficiency, charging insufficiency.

1.6 Reverse charging is prohibited
Please correctly connect the positive (+) and negative (-) electrode of the battery, and strictly avoid reverse charging. Otherwise the battery would not be chargeable. Meanwhile, reverse charging will reduce the charging and discharging performance and security of the battery, even result in heating or leakage.

1.7 Disposal of abnormal phenomena while charging
If there´s any abnormal condition occurs during the charging process, please discontinue the charging process immediately and consult relevant professionals for disposal.