6544/02 EC8 female connector, solder-on

Genuine FG spare/option part.Contents:1 piece

Genuine HT spare/option part.Space-saving no-wire adapter, just 56 mm long.Contents:1 piece

Genuine HT spare/option part.Adapter for connecting two batteries with EC8 connector in series to an esc with a single pair of XT150 connectors.Battery side with EC8 male, esc side with XT150 male for positive and female for negative.Allows the use of two batteries with EC8 connectors without soldering with the esc of the UFRC GX1.Contents:1 piece

Genuine FG spare/option part.Two-pole, reverse-polarity protected plug with very high current capacity. The opening in the contact for the cable has a diameter of 6.5 mm, which is suitable for stranded cables up to about 16 mm² (~ 5 AWG). The easy to grab housing ensures easy disconnection.For assembly, the contact with a soldered cable is press fitted into the housing from the front, where it snaps into place.When used without the blue housing, the contacts are also compatible with the 8 mm sockets found on many larger ESCs.Contents:2 pieces

Genuine FG spare/option part. For motors with and without sensor. Only high-quality components were used in the construction! The controller has many programmable parameters, low voltage protection and a temperature shutdown.Parameters can be programmed via the set button, a programming card or a programming box and firmware updates can be performed using the programming box with a PC.Technical data:Continuous current: 160APeak current burst: 1050ABattery: 3S - 8S LiPo or 9-24 cells NiMHBEC: 6V/7.2 V - 3A/6 ADimensions: 70x56x46.5 mmWeight: 240gContents:1 piece

Power 48 kg with a 6V battery, 62 kg with 2S LiPoDimensions: length 66 mm x width 30 mm x height 56 mmOutput shaft 15T splineContents:1 piece