25 products found for "tlr_353002"

rc-car-online - Home

TLR353002 TLR shock shaft, rear, TiCN coated, 5ive-T/2.0, TLR 5ive-B and Mini WRC

TLR shock shaft for Losi 5ive-T, TLR 5ive-B and Mini WRC rear shocks; TiCN (titanium carbon nitride) coated; approx 96.8 mm long.Direct replacement for stock shock shaft LOSB 2852.Contents:2 pieces

€26.99*

TLR353001 TLR shock shaft, front, TiCN coated, 5ive-T/2.0, TLR 5ive-B and Mini WRC

TLR shock shaft for Losi 5ive-T front shocks; TiCN (titanium carbon nitride) coated; approx 83.3 mm long.Direct replacement for stock shock shaft LOSB 2851.

€29.99*

TLR 353004 Bleeder shock cap screws and Washers, 5ive-T, TLR 5ive-B and Mini WRC

Genuine TLR spare/option part.Content:2 piece

€5.99*

This product is no longer available.

TLR356002 TLR Outerwear Square Pre-Filter 5ive-B

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B.Contents:1 piece

€39.99*

TLR253002 TLR Shock Plastics and Balls 5ive-B, 5ive-T

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B, 5ive-T and Mini WRC.Contents:1 set

€39.99*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

LOS253002 , Shock, Complete Losi DBXL+2.0+MTXL 1/5 4WD

losi_los253002 Color: Silver

Genuine Losi spare/option part.Contents:2 pieces

€109.99*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

LOS253002/01 , Shock springs, Complete Losi DBXL+2.0+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:2 pieces

€19.99*

LOS353007 Losi Lower Shock Cap, Aluminum, 5ive-T / B

Genuine Losi spare/option part. Contents:2 pieces

€29.99*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

TLR253003 TLR Front Spring, 9.1 lb Rate, red 5ive-B

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B.Strenght: 2,6 mmContents:2 pieces

€19.99*

y3002 Stern DTM Team decals sheet

y3002 Elasto film: Original film

Stern DTM decal sheet with several sponsor decals.List of sponsors:SternPetronasSyntiumSandtlerH&RHankookDimensions:1 x 260 mm x 270 mm1 x 210 mm x 270 mmThis decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.

€29.90*

TLR253001 TLR ShockRebuild/Hardware 5ive-B, 5ive-T

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B, 5ive-T and Mini WRC.Contents:1 set

€19.99*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

LOS253006/01 Losi Spring Cups Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:2 pieces

€4.90*

LOS253006 Losi Spring Cups/Clips/Shock Ends Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€29.99*

LOS253008 Losi Shock gaitors Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:4 pieces

€19.99*

LOS253003 Rear, Shock, Complete Losi DBXL+MTXL 1/5 4WD

losi_los253003 Color: Red eloxed

Genuine Losi spare/option part.Contents:2 pieces

€83.99*

LOS253005 FR/R Shock Shaft & Piston Set Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€19.99*

LOS253007 Losi Shock Rebuild Kit/O-Rings/Spacers Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€19.99*

LOS253001 LOSI MINI WRC Rear Springs 7.8 lb Rate Blue

Genuine Losi spare/option part.Measures:Length: 117 mmWire thickness: 2,6 mmInner diameter: 32,7 mmContents:2 pieces

€13.99*

LOS253004 Front/Rear Shock Body, Cap, Aluminum Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Contents:2 pieces

€31.99*

TLR253000 TLR Shock Adjuster Nut with O-ring, 5ive-B, 5ive-T

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B, 5ive-T and Mini WRC.Contents:2 pieces

€19.99*

TLR253006 TLR Front Spring, 10.1 lb Rate, White 5ive-B

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B.Contents:2 pieces

€19.99*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

50353011 Support Blocks for the Lightscale Droop Gauge front 30 mm, 1 pce.

Item N° 50353011Support Blocks for the Lightscale Droop Gauge front, 1 pce.This is an Alloy Support Block anodized in black colour with 30mm height.The Support Block is manufactured as a rectangle and so can used a 30mm, depending on which side you choose.The front block uses a single point of support while the rear one comes with two of those. Due to this 3 point support it is assured that even a little tweak in your chassis (none of them is 100% straight) will not affect the result of your measurement. Remove the wheels and tyres from your car and put the car onto the support blocks. Ideally the rear block is positioned to the back of car and the front one just where the servo saver is fixed to the chassis. The car is now propped on the support blocks safely and cannot bounce. Please make sure that no dirt or rubber is trapped between the Support blocks and the chassis.Now you can easily and correctly measure the droop of each axle and adjust the cars` tweak.To do so please use the Lightscale Droop Gauge (50835400)The use of Lightscales` Droop Gauge Support Blocks prevents incorrect measurements and therefore is absolutely reliable. Measurements which are done using a flat surface where the chassis is resting on, like you would use in the pits are usually incorrect due to a slightly tweaked chassis because dirt underneath the chassis will falsify the measurement and lead to a irregular setup. The use of Support Blocks which are based on 4 support points will result in the same incorrect results and downgrade the performance of your car which is why we 100% recommend the use of our support block because as racers ourselves we know all about the problems you may face.

€24.90*

50353021 Support Blocks for the Lightscale Droop Gauge 35 mm rear, 1 pcs.

Item N° 50353021Support Blocks for the Lightscale Droop Gauge 35 mm rear, 1 pce.This is an Alloy Support Block anodized in black colour with 35mm height.The Support Block is manufactured as a rectangle and so can used as a 30mm as well as a 35mm, depending on which side you choose.The front block uses a single point of support while the rear one comes with two of those. Due to this 3 point support it is assured that even a little tweak in your chassis (none of them is 100% straight) will not affect the result of your measurement. Remove the wheels and tyres from your car and put the car onto the support blocks. Ideally the rear block is positioned to the back of car and the front one just where the servo saver is fixed to the chassis. The car is now propped on the support blocks safely and cannot bounce. Please make sure that no dirt or rubber is trapped between the Support blocks and the chassis.Now you can easily and correctly measure the droop of each axle and adjust the cars` tweak.To do so please use the Lightscale Droop Gauge (50835400)The use of Lightscales` Droop Gauge Support Blocks prevents incorrect measurements and therefore is absolutely reliable. Measurements which are done using a flat surface where the chassis is resting on, like you would use in the pits are usually incorrect due to a slightly tweaked chassis because dirt underneath the chassis will falsify the measurement and lead to a irregular setup. The use of Support Blocks which are based on 4 support points will result in the same incorrect results and downgrade the performance of your car which is why we 100% recommend the use of our support block because as racers ourselves we know all about the problems you may face.

€29.90*

LOS253000 LOSI MINI WRC Front Springs 11.4 lb Rate Blue

Genuine Losi spare/option part.Dimensions:Length: 103 mmWire thickness: 2,8 mmInna diameter: 32,4 mmContents:2 pieces

€13.99*

25 products found for "tlr_353002"

Filter products

rc-car-online - Home