LOSB5903 Losi Rod End Set Losi 5ive-T, TLR 5ive-B and Mini

€19.99*

Prices incl. VAT plus shipping costs

Available

Product number: losi_losb5903

EAN: 605482045275

Product information "LOSB5903 Losi Rod End Set Losi 5ive-T, TLR 5ive-B and Mini"

Genuine Losi spare/option part.

Contents:

12 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

4429 FG Steel balljoint

Genuine FG spare/option part. Steel ball-and-socket-joint with 5mm bore in the ball and M6 right-handed thread for use with the wishbones. For the installation are needed the adjusting screws 4430 or 4431. The delivery contains all needed pin disks. Dimensions:A = 5 mmB = M6C = 8 mmD = 15.5 mmE = 37 mmContents:2 pieces

€42.30*

4429/02 FG Steel taper disk 5mm bore

Genuine FG spare/option part.Steel taper disks, 3.5 mm thick, with a higher stiffness compared to alloy taper disks. Installation of these disks allows for larger operation angles of the metal ball joints and rose joints. You need two disks per joint.Contents:4 pieces

€11.50*

Similar products

LOSB5015/set Losi Gas Tank 5ive-T, 5ive-T 2.0, TLR 5ive-B and Mini, complete incl. mounting set

Genuine Losi spare/option part. Since quite a few of our customers order the Losi 5ive-T 2.0 with brushless drive, we have several genuine tank sets with mounting brackets included from this conversion in stock. Therefore we put them on sale at an exceptionally low price.The regular price for this set of spare parts is 84.50 .Complete set with tank, ventilation and fuel hose, tank pendulum, mounting brackets and screw-on fuel cap.Tank capacity: 800 ml.Content:1 set

€49.90* €84.00* (40.6% saved)

LOSB5972 Losi Outer Axle Ball Bearings sealed, 12 x 24 x 6 mm, Losi 5ive-T/2.0, TLR 5ive-B and Mini WRC.

Fits Losi 5ive-T, TLR 5ive-B and Mini WRC.Dimensionally identical with B59010 / B59011.Content:2 pieces

€9.99*

LOSB5904 Losi Camber & Steering Pivot Ball Set Losi 5ive-T, TLR 5ive-B and Mini WRC

Genuine Losi spare/option part. Compatible with B51008/55041Compatible with B51008/55042Compatible with B51008/55043Contents:12 piece

€34.99*

Details

LOSB3216 Losi F/R Driveshaft & CV Coupler 5T

Genuine Losi spare/option part. Contents:1 piece

€29.99*

LOSB5800 Losi Body clips for 5ive-T/2.0, TLR 5ive-B and Mini

Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini. Content:2 x body clip approx. 1.4 mm wire diameter and 85 mm toal length6 x body clip approx. 1.4 mm wire diameter and 25 mm toal length12 x body clip approx. 2.0 mm wire diameter and 43 mm toal length

€9.99*

LOSB5045 Losi 20T Pinion Gear, 1.5M & Hardware 5ive-T/2.0, TLR 5ive-B und Mini WRC

Genuine Losi spare/option part. Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC.Technical info:Modul: 1,5Teeth: 20 piecesContents:1 piece

€29.99*

LOSB5800/02 Losi Body clips medium, 43 mm

Fits Losi 5ive-T, 5ive Mini and many more. Wire thickness: 2 mm.Length: 35 mm.Content:10 pieces

€4.90*

LOSB5800/03 Losi Body clips smal, 25 mm

Fits Losi 5ive-T, 5ive Mini and many more. Wire thickness: 1,4 mm.Length: 25 mm.Content:10 pieces

€3.50*

LOSB3225 Losi F/R Wheel Hex & Pin 5T, TLR 5ive-B and Mini

Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini.Dimensionally identical with B55015Content:2 pieces

€39.99*

LOSB5023 Losi Air Cleaner Foam Elements for 5T

Genuine Losi spare/option part. Spare part for 5T standard air filter: LOSB 5022 Air Cleaner Set Complete 5T.Contents:2 pieces

€19.99*

LOSB5044 Losi 19T Pinion Gear, 1.5M & Hardware 5T, TLR 5ive-B and Mini WRC

Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC.Dimensionally identical with B55029Contents:1 piece

€29.99*

LOSB3217 Losi CV Joints and Pins 5T, TLR 5ive-B and Mini

Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini.Content:2 pieces

€9.99*

Details

Customers also viewed

4429/02 FG Steel taper disk 5mm bore

€11.50*

4429 FG Steel balljoint

€42.30*

y0203 Shaft seal conversion kit for Losi 5ive-T and Mini differential

This kit replaces the o-ring for sealing the drive cup shaft in the stock differential case by a real oil seal. Two new shims provide for the adjustment of the width of the shaft seal and replace the stock shim.Shaft seals are better than o-rings for sealing fast rotating shafts.The set includes the parts for retrofitting all three differentials of the vehicle.Installation can be done only in the differential housing. Unfortunately the corresponding bore in the differential gears is machined differently, so you have to stay with the O-ring for that application.Set includes:Three pieces shaft seal 10 x 15 x 3 mmThree pieces shim 15 x 21 x 0.2 mmThree pieces shim 10 x 20 x 0.3 mmFive pieces washer 10,5 x 20 x 2 mm

€6.90*

LOS352001 Spur Gear, Center Diff, 62 teeth, 5ive-T/2.0 and Mini

Genuine Losi spare/option part. Gear table:Gears:Ratio:Slug:LOSB5046 18 Teeth pinion / 18 to 6211,39LOSB5804 Engine MountLOSB5044 19 Teeth pinion / 19 to 6210,79LOSB5803 Engine MountLOSB5045 20 Teeth pinion / 20 to 6210,25LOSB5805 Engine MountThe 62T spur gear is also very helpful with brushless conversions, creating more space between motor and center diff. This allows the use of smaller pinions for all those, who are not into top speed only.Contents:1 piece

€89.99*

6000CZ30 FG Marder 2WD Legend 30 Years - limited and numbered special edition

To celebrate the 30th anniversary of the legendary Marder 1/6 scale 2WD buggy, FG Modellsport/T2M releases a special edition, limited to 300 numbered pieces, with the original signature of Franz Gröschl on the sticker sheet as well as a top equipment (G260RC Zenoah engine, hi-capacity low friction aluminum shock absorbers and special aluminum engine mounts). with original 260 Zenoah with Low-Friction Alu shocks with alloy enginemount The Models is built on a 4 mm u-bended chassis. All borings of the lower side are countersunk, therefore the screw heads can't bear out.Double wishbones at font and rear axle as well as 4 bulk oil-pressure shock absorbers guarantee perfect ground adherence. All rotating parts are supported by ball-bearings. Rear gear wheels, differential gears and all driving elements are case-hardened. The side guards protect the model from dirt. With original signature of Franz Gröschl. The model is equipped with a powerfull 26 ccm engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 liters enables you to drive about 45 minutes. The engine can be started without difficulties through the integrated pull-start. To complete the models all merchantable servos and radio control systems are suitable.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery

€799.99*

Configure now

LOSB5039 Losi Clutch Shoes & Spring, 8,000 RPM. 5T, Mini, DBXL+MTXL

Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Contents:1 pieces

€69.99*