727 products found for "fg_offroad_monstertruck_2wda"

rc-car-online - Home

FG Monster Truck WB535 4WD HT-Edition

Our 4WD models are attractive and very popular. The wheelbase of the WB535 version is 40 mm longer. This modification improved the directional stability as well as further driving qualities significantly. Equipment of the modelAngled 4 mm alloy chassis with countersunk borings at the bottom, 4-wheel belt drive, belt drive cover, differential gear at front and rear axle with hardened bevel gearwheels, closed front axle housing, closed belt drive at the rear, adjustable double wishbones at front and rear axle, all driving parts and gearwheels made of case-hardened steel, adjustable servo saver, 4 adjustable oil-pressure shock absorbers, rear gear brake, alloy side plates, Monster tires with chrome-plated rims, polycarbonate body shell, decal set.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The model is equipped with a original 26 cm³ Chung-Yang (series engine) combustion engine with muffler and ready-for-use oiled filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-starter system the engine can be started without any difficulties.The pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.The RTR-version is delivered with assembled and preset radio control system and rechargeable batteries. to complete the non-RTR version all popular servos and radio control systems are suitable.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURDimension:Length: 780 mmWidth: 510 mmHeight: 350 mmWheelbase: 535 mm

From €1,279.95*

Configure now

6181 FG Front wishbone for Monster-Truck

Genuine FG spare/option part. Plastic wishbone for all monster and stadium modelsContents:1 piece

€13.10*

FG Monster Truck WB535 HT-Edition

The Wheelbase of the WB535 2WD version is 60 mm longer. This modification improved the directionally stability as well as further driving qualities significantly. In addition parts of the 4WD Monster models were assembled in order to make a conversion to a 4WD model possible with low efforts. According to the large tires this model can be driven almost everywhere. The 26 cm³ Zenoah engine provides sufficient power. Driving fun as well as tremendous looks are the prime characteristics of these models.The body shell comes unpainted, a decal set with writings for further decoration is enclosed in the delivery.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The undercarriage of the Monster models is built on a 4 mm angled alloy plate. All borings for fixa- tion of the chassis parts at the bottom side are countersunk in order to prevent the screw heads from sticking out. At the front axle you have the possibility to adjust toe-in or toe-out as well as the wheel camber through track rods with right-hand/left-hand thread. The wheel camber of the rear wheels can be adjusted individually through adjusting screws with right-hand/left-hand thread. Four large-volume oil-pressure shock absorbers are mounted at the lower double wishbones of front and rear axle, these are able to absorb larger shocks of jumps to a great extent and care for an optimal road grip. All rotating drive components are supported by ball bearings. Highly stressed steel parts such as rear gearwheels, differential gears and drive components are hardened. Fuel tank and ra- dio control parts are protected through alloy plates at the sides. The body parts are made of coloured or respectively clear polycarbonate. The Monster tires with tire inserts are glued on chrome-plated rims.The models are equipped with a powerful 26 cm³ combustion engine with ready-for-use oiled air fil- ter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURAlloy spur gear carrierUse for 48T - 46 teeth spur gears.Value: 39,90 EURBall bearing set, sealed, set of 15The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 217,30 EURThe pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.The RTR version is delivered with assembled and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control sys- tems are suitable.Dimensions: Length: 780 mm Width: 510 mm Height: 350 mm Wheelbase: 353 mm

€1,179.90*

Configure now

6034 FG Stiffening brace for Monster-Truck

Genuine FG spare/option part. For all FG monster and stadium models with dual shock front axle.Dimensions:Length: 185 mmDiameter: 10 mm

€11.90*

y18004 HT-alloy shock tower for 2WD Monster-Truck

Shock tower, replaces FG # 6099/1.

€69.90*

1/5 KRATON 4X4 8S BLX Brushless Speed Monster Truck RTR

€999.99*

6195 FG Vehicle decals for Stadium + Monster-Truck, set

Genuine FG spare/option part.Dimensions:Sheet 1: 525 x 345 mmSheet 2: 465 x 345 mmContents:1 set

€65.90*

6250/03 FG Front disk brake for Monster-Truck - set

Front disc brake hop-up for monster and stadium models with dual shock front axle. Significantly improved braking preformance without rear axle lock-up.Attention!!Can only be installed in connection with the alloy uprights .

€99.50*

6233/06 FG Foam tire insert for Stadium/Monster-Truck

Genuine FG spare/option part.Foam inserts for Stadium/Monster tires.Dimensions:Length: 450 mmWidth: 90 mmHeight: 36 mmContents:2 pieces

€16.50*

68504 FG Conversion kit FG monster/stadium truck/hummer 2WD 535 to 4WD.

For converting the FG Monster/Stadium Truck 535 2WD into a model with 4WD drive.The conversion kit contains all chassis parts and drive parts required for the conversion, except for differential grease.

€249.50*

23100/11 FG Body set Monster-Truck white WB535

Genuine FG spare/option part. The bodyshell is made from colored polycarbonate. The set include Main section (FG no.: 23100/01), Front section (FG no.: 23100/02) and mounting screws.The decal set are not included!Dimensions:Length: 660 mmWidth: 290 mmHeight: 195 mmWheelbase: 460 mmContents:1 set

€144.90*

y18006 HT-alloy front bulkhead for 2WD Monster-Truck

Front bulkhead (A/B), with replaceable bushings. Suspension travel limiter is needed when used as bulkhead A.

€37.90*

20110/02 FG Front body Monster/Stadium/Street-Truck yellow

Genuine FG spare/option part. Contents:1 piece

€32.50*

6099/01 FG Front shock mount for Monster-Truck

Genuine FG spare/option part. Suitable for all FG Monster-Truck und MB-Pro models.Dimensions:Height: 92 mmWidth: 160 mmContents:1 piece

€17.90*

20100/02 FG Front body Monster/Stadium/Street-Truck white - 1 pcs

€33.00*

Details

FG Elektric 4WD Monster-Truck WB535, ESC 150A and Brushless Motor 6S

No matter where you will set this model into action - you will always be right in front with the FG Monster-Truck 4E! The E stands for electric power, the 4 means fourwheel drive. Extremely fast, terrific torque and all this without any engine noise. The Model is equipped with a powerful Brushless Motor and a ESC.You can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. The control can be regulated simply via transmitter or optionally via a program card. For the final assembling you need LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length of 150mm and a width of 50mm. The model is delivered with the EC8 connector system.Dimensions:Length: 710 mmWidth: 510 mmHeight: 390 mmWheelbase: 535 mm

From €1,229.90*

Configure now

y18000 HT-alloy a-arm for 2WD Monster-Truck, front upper

Genuine HT spare/option part. Upper a-arm with replaceable bushings. One piece per pack.Contents:1 piece

From €44.90*

Details

6182 FG Front lower shock mount for Monster-Truck

Genuine FG spare/option part. Stock plastic version for all monster and stadium models except Monster Beetle (not PRO!).Contents:2 pieces

€6.90*

y18003 HT-shock mounts for 2WD Monster-Truck, front lower

Shock mounts for the lower a-arms. Sold in pairs.

€37.90*

y18001 HT-alloy a-arm for 2WD Monster-Truck, front lower

va_0003 Side: Right and left - y18001/L + /R+ 39.9EUR

Genuine HT spare/option part. One-piece lower front a-arms with replaceable bushings.You need a pair of our rose joints to complete the a-arms. FG # 4466 can be used as well. One piece per pack; l/h or r/h.Contents:1 piece

Variants from €44.90*

€84.80*

18007 HT-suspension travel limiter for 2WD Monster-Truck, front

Suspension travel limiter , must be used in conjunction with bulkhead above.

€29.90*

26100/01 FG Body Monster / Stadium-truck 2WD/4WD white

Genuine FG spare/option part.Spare part for FG Monster Truck and Monster / Stadium Truck 2WD/4WDScope of delivery consists of the painted body shell (front and main section). The shop menu allows you to select different decal sets, roll bar and off-road light dummies.Dimensions:Length: 660 mmWidth: 290 mmHeight: 195 mmWheelbase: 460 mmWith some modifications also suitable for Smartech / Carson Monster Truck, Pick Up Truck, Comanche, Stadium Truck as well as Monster Beetle. New mounting holes must be drilled and the bottom area of the bed must be almost completely removed to keep the roll cage of the Carson Smartech car. Contents:1 set

€172.45*

6142 FG Alloy plate front axle for Monster-Truck

Genuine FG spare/option part. Fits all monster and stadium cars.Content:1 piece

€16.50*

4492 FG rear lower alloy wishbone for Monster-Truck

Genuine FG spare/option part. Suitable for Monster-Truck models with eight shock absorbers. Please note: must use inge pins 6075 instead of 6073! Contents:1 piece

€71.50*

727 products found for "fg_offroad_monstertruck_2wda"

Filter products

rc-car-online - Home