20 products found for "fg_7462"

rc-car-online - Home

7462 FG Ball bearings 10x19x5mm - 1pce.

Item N° 7462 Ball bearings 10x19x5mm - 1pce.Suitable for all FG models and other makes.

€5.90*

7462/06 FG ball bearing 10x19x5 sealed, 2 pcs.

Genuine FG spare/option part.Suitable for all FG models and other makes.

€17.40*

7422 FG Gear wheel protect for 38/40/42 teeth - set

Gearwheel protection in transpartent polycarbonate for all FG 1:5 scale models with the gear wheels 38, 40, 42 teeth. Protects the driving gear wheels almost from dirt, sand and stones. We recommend the mounting when driving on car parks. Not suitable for Formel 1, Leopard 2 + 4 Competition, Competition and Competition Evolution models.

€39.50*

7362 FG Needle(slow-speed)/spring - 2pcs.

Item N° 7362 Needle(slow-spped)/spring - 2pcs.Spare part for Zenoah ZG22.

€17.30*

7466 FG Pin set - 2pcs.

Item N° 7466 Pin set - 2pcs.Suitable for all FG 2-speed gear boxes.One piece each 3 x 7 and 3 x 14 mm

€4.80*

8462, FG Plastic parts, set

Spare part for , , , , and .

€11.10*

7465 FG Thread pin M6x6mm Tuflock - 4pcs.

Item N° 7465 Thread pin M6x6mm Tuflock - 4pcs.Suitable for all 2-speed gears.

€2.90*

7460 FG 2-Speed clutch bell - 1pce.

Suitable for all FG 2-speed gear boxes.Dimensions:Shaft diameter 10 mmShaft length 56 mmOverall length 79 mmAouter diameter bell 58 mmInner diameter bell 56 mmContent:1 pieces

€58.90*

7472 FG Tuning clutch bell hardened

Genuine FG spare/option part. Case-hardened Tuning clutch bell in high quality steel. Borings for cooling and a reinforced outside diameter ensure shape stability at high speed. Suitable for all 1:5 and 1:6 models except Formula 1.Shaft 10 x 38 mmFlat sections for set screws with 90° offsetContent:1 piece

€64.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

7467 FG Circlip and securing ring - 6pcs.

Item N° 7467 Circlip and securing ring - 6pcs.Suitable for all 2-speed gears.Part is delivered in silver or black color from vendor!

€5.70*

9462 FG inlet silencer rotatable - set

The rotatable FG inlet silencer is especially for the models with higher bodies as Touring cars, f.e. Mercedes CLK-DTM, Honda Accord a.s.o., Race-Trucks and Rallye cars. For mounting you need the air filter adapter or for Solo, or for Zenoah G230RC, G260RC, FG CY23, CY26 and or for Zenoah ZG22, G2D, Tech. This combination, filter with adapter, allows to turn the inlet silencer into the optimal position.

€41.80*

7452 FG 2-speed gear box 1:5 4WD for Sportsline 4WD, set

Genuine FG spare/option part.Fits FG cars with 510 mm and 535 mm wheelbase. Not suitable for Competition and Formular 1 models.Included gears:1st gear: 22T / 42T2nd gear: 24T / 40T2-speed gear box, retrofitting is possible for all FG 1:5 Sportsline 4WD models. Adjustable shit point, built very robustly, therefore high reliability gearwheels can be replaced in not time. The small gearwheels are made of hardened steel. If you use the gearwheel 7424/01 (38 teeth) you need the allow hub A 47 mm 7456/01.

€244.95*

6462 FG Air filter adapter for 6460 and 6461 - 1pce.

€16.70*

7492 FG Rear spring deflection limiting - set

Suitable for all FG 1:5 touring cars and Race-Trucks except Evo.

€14.00*

7432 FG Steel gearwheel hardened 24 teeth - 1pce.

Item N° 7432 Steel gearwheel hardened 24 teeth - 1pce.Suitable for 39, 40 and 41 teeth main gear wheel.Diameter 38.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5

€31.90*

7469 FG 2-Speed plastic bush - 2pcs.

Item N° 7469 2-Speed plastic bush - 2pcs.Suitable for all FG 2-speed gear boxes.Inner diameter 15.9 mmOuter diameter 17.2 mmFlange diameter 20.9 mmFlange thickness 1 mmWidth 7.5 mm

€5.70*

7461 FG Free-wheel sleeve

Genuine FG spare/option part. Suitable for all 2-speed gears.Dimensions:Outer diameter: 14 mmInnerdiameter: 10 mmWidth: 12 mmContents:2 piece

€23.90*

7426 FG Plastic gearwheel 26 teeth - 1pce.

Suitable for all 1:5 models.Diameter 42 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Please pay attention that plastic pinions with two opposite flat spots cannot be used on clutch bells with 90° angle pinion shaft. Then you need a .

€7.70*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

7468 FG Spring/ball

Item N° 7468 Spring/ball.Suitable for all FG 2-speed gear boxes.Ball 5 mmSpring 4.6 mm diameter x 10 mm length

€6.90*

87462 HPI Shock repair kit for 20 x 127 - 187 mm

Genuine HPI spare/option part. Spares/repair kit for the front shocks of the Baja 5B buggy. Contains replacement O rings, plastic cartridge, piston, ball, shock shaft, shock boot, sponge and heavy duty C-clip.Contents:2 pieces

€50.49*

20 products found for "fg_7462"

Filter products

rc-car-online - Home