6462 FG Air filter adapter for 6460 and 6461 - 1pce.

€16.70*

Prices incl. VAT plus shipping costs

Available

Product number: fg_6462

EAN: 3410569687777

Product information "6462 FG Air filter adapter for 6460 and 6461 - 1pce."

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

6464/04 FG Foam filter

Genuine FG spare/option part.Spare part for FG no.: 6464.Dimensions:Inner diameter: 20 mmHeight: 71 mmContent:2 pieces

€10.90*

Details

6464/05 FG Foam filter oiled

Genuine FG spare/option part.Spare part for FG no.: 6464.Dimensions:Outer diameter 61 mmInner diameter 20 mmHeight 71 mmContent:2 pieces

€12.90*

6496/04 FG Guide bushing - 8pcs.

6 mm bore

€9.50*

6465 FG air filter for 1:6 Off-Road models complete - set

Item N° 6465 FG air filter for 1:6 Off-Road models complete - setYou will need the adapter plate 6451/03 for installation.

€34.50*

6477/03 FG Upright pin 4 mm

Genuine FG spare/option part.Spare part for 6477. Dimensions:Length 19 mmDiameter: 4 mmContents:2 pieces

€6.30*

6496 FG Alloy front bulkhead 2WD A and B

Genuine FG spare/option part.CNC-manufactured front axle mounts A and B in alloy with rebound stop. The borings for the wishbone pins are equipped with guide bushes. Suitable for Marder, Marder Race, Beetle On-/Off-Road and Monster models.Contents:1 set

€89.90*

6493 FG Steel spur gear 48T with adapter

Genuine FG spare/option part. Hardened steel gearwheels for the gears of the 1/6 off-road models.Module: m=1,5Contents:1 set

€93.50*

6479 FG Rear alloy uprights 08

Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (wishbone pin), too. Fits the rear axle of all FG offroad cars (2WD and 4WD) and all Carson / Smartech cars.Content:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm

€133.95*

6492 FG Steel spur gear 46T with adapter - set

Hardened steel spur gear for FG 1/6 off-road models, spur gear diameter 72 mm.Module: m=1,5

€97.90*

6491 FG Steel spur gear 44T with adapter - set

Hardened steel gearwheels for the gears of the 1/6 off-road models.Module: m=1,5

€93.90*

6485/01 FG Alloy engine mount small for 1:6/CY / Zenoah alloy - 1pce.

Item N° 6485/01 Alloy engine mount small for 1:6/CY / Zenoah alloy - 1pce.Small alloy engine mount suitable for FG 2WD and 4WD 1/6 cars and Porsche 4WD with CY / Zenoah G230/240/260/270 engine.

€54.90*

6481/04 FG O-ring 20x1,5mm - 4pcs.

Suitable for , and .

€4.10*

Customers also viewed

6462/01 FG plastic cover for K+N filter - 1pce.

€2.10*

HT-Airbox Evo, y19028 - 1pce.

HT-airboxes, very small, low height design and low weight; but with a large (45 mm diameter) filter element. The boxes will fit on a FG car under a Porsche GT3 body and weighs even less than a FG Formula 1 airbox. The filter mounts directly above the carburetor and remains there, even when the box itself has been removed.The Evo-airbox has a higher flow rate, which is important for the high revving engines in onroad cars. Its diameter (100 mm) will usually allow an installation only in a few buggies with a vertically mounted engine, like Gas Devil / Titan / Helldevil.All parts available separately.

€51.20*

68413 FG Front alloy uprights 4WD

Genuine HT spare/option part.The set includes uprights, steering arm, stoppers and screws.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR and Mini and Leopard 2 und 4WD.Contents:1 set

€224.95*

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters

Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€42.90*