3109 FG Rear rim insert Trucks

€19.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_3109

EAN: 3410564501962

Product information "3109 FG Rear rim insert Trucks"

Genuine FG spare/option part.

Required for scale rim appearance. Suitable for 3105/02.

Dimensions:

Outside diameter: 100 mmInside diameter: 25 mm

Content:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

3105/01 FG Rim 1:6 silver - 2pcs.

Item N° 3105/01 Rim 1:6 silver - 2pcs.Suitable for FG Truck models and 1:6 Off-Road models (Marder, Beetle and Pajero).Rim with 18 mm square driveBulk:Diameter: 120 mmWidth: 61 mm

€14.40*

Details

Similar products

4412 FG Driveshaft boots

Genuine FG spare/option part. Suitable for all FG models and other. To complete one car you need two sets.For 2WD models you need two sets and for 4WD models you need four sets.Contents:2 pieces

€19.90*

3262/01 FG Vehicle decals set CAT-Truck

Genuine FG spare/option part.Contains the stickers of the headlights, the rear lights and the radiator grill.Not included are the advertising labels for the original design. Please order separate.Dimensions:435 x 145 mmContents:1 piece

€16.10*

4173/01 FG Vehicle decals Audi R8 LMS

Genuine FG spare/option part. Contains the vehicle specific decals for an original appearance.Contents:1 set

€49.50*

4411/06 FG bearing set with grease filling EVo/Competition

Genuine FG spare/option part. FG ball bearing with heat resistant grease filling up to 180°. Therefore essentially improved durability of the wheel bearings and the clutch bell.For all FG cars with alloy differential case except 4WD and Formula 1.Contents:Eight pieces: 8 x 22 x 7 mmTwo pieces: 10 x 22 x 6 mmTwo pieces: 10 x 19 x 7 mmTwo pieces 15 x 28 x 7 mm

€35.95*

3438 FG Body detailing kit Truck

Genuine FG spare/option part.Contents:1 set

€19.90*

4152/01 FG Audi A4 DTM flaps

Genuine FG spare/option part. The set includes two pieces of white flaps with screws.Fits body shells 4149 and 4149_01.Contents:1 set

€12.90*

4171 FG Front body Audi R8 clear

Genuine FG spare/option part. Contents:1 piece

€52.95*

3152/01 FG Extended rear mount Trucks

Genuine FG spare/option part. Rear body mount, bolts to rear shock stay. Suitable for Atego and Mercedes Benz 1834.Dimensions:Total length: 65mmLength until body support: approx. 55mmContents:1 piece

€15.50*

Details

3259 FG Body set Street Truck 4WD

Genuine FG spare/option part. Former: "MB 1834" Truck. The set contains the main body, the driver's cab, the driver's cab side parts and the body screws.The rear bumper won't be delivered and has to be ordered separate. The set is delivered not painted.Dimensions:Length: 870mmWidth: 435mmHeight: 390mmWheelbase: 535mmContents:1 setPainting tips:

€255.50*

Details

4411/13 FG ball bearing set for 1/5 2WD, sealed, 14 pcs.

Genuine FG spare/option part.Fits too WB535 cars.Content:2 pieces: 10 x 19 x 7 mm2 pieces: 10 x 22 x 6 mm8 pieces: 8 x 22 x 7 mm2 pieces: 12 x 28 x 8 mm

€47.50*

3258 FG Rear bumper 1834/Atego

Original FG Ersatz-/Tuningteil.Suitable for 1834 and Atego body shells. Bumper is delivered not painted but inclusive the mounts.Inhalt:1 StückPainting tips:

€43.75*

4402 FG Alloy steering stop for alloy uprights

Genuine FG spare/option part. A buckling of the inner front wheel in curves becomes impossible when mounting the alloy steering stop.Suitable for 6103/05, 6103/06, 4403, 4403/01, 4404 and 4406.Dimensions:Length: 24 mmDiameter: 7 mmThread: M4 Contents:2 pieces

€13.90*

Customers also viewed

FG Sportsline 2WD-530 with Super Street Truck body and HT-Edition

Former: "Mercedes 1834" Truck.The Sportsline 08 quality at a reasonable price for beginners. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 20T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. The models are equipped with a powerful 23 cm³ combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURDimensions:Length: 880 mmWidth: 435 mmHeight: 380 mmWheelbase: 530 mmTrucks in action!

€1,349.95*

Configure now

3279 FG Body Set FG Team Truck 2WD, 1 pce

New FG Race Truck Body made of clear polycarbonate, not painted. The body consists of two parts. Suitable for FG Sportsline chassis 1:5 2WD and 4WD, 07 and Competition EVO 08 Chassis. Also fits other manufacturers' chassis with a wheelbase of 530mm.Painting tips:

€255.95*

7021 FG Plastic parts roll cage each

Genuine FG spare/option part. Suitable for the following roll cages:70227024/01For tubes with a 10 mm outer diameter and 1 mm wall thickness.

€17.90*

7400/04 FG 3-chamber tuning resonance silencer 5-028/DMC

Original FG product The 3-chamber tuning resonance pipe is supplied without manifold and mounting supplied. 1 piece

€215.00*

Details

FG Sportsline Truck 4WD-530 with FG Super Race Truck body shell clear HT-Edition

After the successful introduction of the 4WD Sportsline chassis for 1:5 FG Touring and Sports cars this chassis is now available also for Race Trucks. Mainly rookies benefit from the advantages of an all-wheel drive. Traction also on dusty asphalt, therefore no pulling of the rear section, all around just pure driving fun. These are just some advantages of the four-wheel drive.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The body shell is clear.The Race Truck chassis is equipped with a double wishbone suspension, toe-in, camber and castor can be adjusted. The robust all-wheel drive gives the vehicle a neutral driving performance on almost every surface. We set big value on durability using strong materials as well as operator convenience. The FG Sportsline class is the affordable, but still high-quality entry into the RC car sport.Technical description:Equipped with a powerful 26 cm³ engine, Tuning pipe, tank with snap closure, 2 differential gears, front disk brake and a lot more. Highlight however remains the approved FG all-wheel drive. Maximal traction as well as simple handling, grip in curves - these are the advantages only a four-wheel drive can offer. With a wheelbase from 530 mm.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURDimensions:Length: 880 mmWidth: 435 mmHeight: 380 mmWheelbase: 530 mmTrucks in action!

€1,399.95*

Configure now

y6479 HT rear alloy upright

Genuine HT spare/option part.Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (hinge pin), too. Fits the rear axle of all FG and Carson / Smartech 1/6 scale cars.Comes with adjustment clips and grub screws for the hinge pins included.Dimensions:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm Contents:2 pieces

€89.90*