32767 Exhaust mount - 1pce.
€3.95
% €7.90 (50% saved)
Available
Product information "32767 Exhaust mount - 1pce."
Login
Alternatives
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces
Accessories / Spare parts
Genuine HT spare/option part. RC Tech Pipe Protect protects your exhaust against oil and rubber deposit while racing. A clean exhaust gives better resonance, which means better performance from your engine. Thanks to RC Tech Pipe Protect your exhaust system can evacuate the temperature better.Direction of useSpray a relatively thick layer of Pipe Protect from a close distance; +/- 15/20 cm on your new or just-cleaned and preferably polished exhaust pipe. After each ride clean the exhaust pipe with a clean cloth, if necessary slightly sprayed with some Pipe Protect. Treat the exhaust pipe again before each race.Contents:1 piece / 400 ml
Content: 400 Milliliter (€24.75 / 1000 Milliliter)
Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.
Content: 50 Milliliter (€538.00 / 1000 Milliliter)
Customers also bought
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).Only suitable for models with 18 mm square mount.The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline Also suitable for electric models, but in conjunction with aluminum axle y0932 Bleeding instructionsPlease enquire whether this brake is suitable for your model. Dimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set
The set includes: rear platedifferential mountsupper a-armslower a-armsinstallation hardware. Please note: must use inge pins 6075 instead of 6073! y0991for all FG 1/5 scale Sportsline 2WD touring cars, GT models (except Formular 1 and 1/6 scale Race Truck) The set includes:Rear platedifferential mountsupper a-armslower a-armsriser platesinstallation hardware.Please note: must use inge pins 6075 instead of 6073! y1003for all 1/6 scale Smartech Uno, Carson Attack, Super Attack, Gas Blaster and 1/5 scale Smartech/Carson touring car C5 and R5 models. The set includes: rear platedifferential mountslower a-armsupper a-armsinstallation hardware. Please note: must use inge pins 6075, also you need two packets turnbuckle 40 mm 6100/04y1205For Smartech 2WD Monster-Truck, Pick up Truck, Monster-Beetle, Comanche, CRT. The set includes: rear plate differential mounts lower a-arms upper a-arms steel turnbuckles for upper a-arms installation hardware. Please note: the hinge pins are not included, you will use the pins from the stock suspension!
Genuine MD spare/option part. The red version with a temperature resistant up to 300°C. Directions for use:Clean the surfaces with a cleaner. Apply MD-Sil on one side and press the parts together. Touch-dry in 10 - 20 minutes. Curing speed 3 mm/24 hours. Contents:1 piece / 80 ml
Content: 80 Milliliter (€211.25 / 1000 Milliliter)
Special version for Zenoah / CY crankshaft with larger radius at the shoulder of the inner race.
Genuine FG spare/option part. Spare part for:6250/016250/028450/0184521045010451Center hole distance 16 mm.Content:1 piece
Steel ball joint 6 mm r/h or l/h thread, 4 mm bore in ball, for steering rods and other applications.This version is for steering rod applications.Sets available:One each with r/h and l/h threadOne x r/h threadOne x l/h thread Please note:We recommend using a nut 4472/03 for locking the r/h thread ball joint to prevent the linkage from loss of adjustment.
Customers also viewed
Protects against vibration and dirt which could jeopardize the spring. The spring is not protected by the rubber tube only, but also relieved.product contents: 2 pcs.
Genuine HT spare/option part. Very strong, multiple glas fiber layers, nevertheless very stretchable. Resist maximum temperatures up to 250°C (482°F) from.Needs hose clamps with at least 35 mm inner diameter! Maße:Inside diameter: 22 mm Outside diameter: 30 mmWall thickness: 4 mmLength: 50 mmContents:1 piece
Genuine FG spare/option part. Spare silencer for Megane Eco-Line.Contents:1 piece
Genuine FG spare/option part. Fits Zenoah G230 / G240 / G260 / G270 and all CY engines.The rings are inserted between shaft seel and crankshaft. They improve top speed and accelleration.Content:2 pieces
Wire diameter 2.5 mm, cut and bend as needed.
6 litre gas can with thumb activated filler valve.With Rapido filling up is quicker, simpler and more convenient than ever! Thanks to the dosing button you can control the flow of fuel precisely.Unlock by folding out!Press the button and keep control of filling!Lock by folding in again. Finished!No spills, no awkward handling, all clean and easy Other:Half round spout for ventilation and visibility suitable also for the smallest tank openingsLarge opening for easy fillingFlow controlled by press-buttonVentilation allows full flowSturdy design with two handlesTransparent 6 litre container with litre indication in the filling and rest positionsContents:1 piece