8462/03 FG Plastic bowden cable holder long for standard cab
€5.20
Available
Product information "8462/03 FG Plastic bowden cable holder long for standard cab"
Spare part for:
- 6250/01
- 6250/02
- 8450/01
- 8452
- 10450
- 10451
Center hole distance 16 mm.
Content:
- 1 piece
Lebacher Strasse 4
66113 Saarbrücken
Germany
Login
Customers also bought
Genuine MD spare/option part. The red version with a temperature resistant up to 300°C. Directions for use:Clean the surfaces with a cleaner. Apply MD-Sil on one side and press the parts together. Touch-dry in 10 - 20 minutes. Curing speed 3 mm/24 hours. Contents:1 piece / 80 ml
Content: 80 Milliliter (€211.25 / 1000 Milliliter)
Special version for Zenoah / CY crankshaft with larger radius at the shoulder of the inner race.
Steel ball joint 6 mm r/h or l/h thread, 4 mm bore in ball, for steering rods and other applications.This version is for steering rod applications.Sets available:One each with r/h and l/h threadOne x r/h threadOne x l/h thread Please note:We recommend using a nut 4472/03 for locking the r/h thread ball joint to prevent the linkage from loss of adjustment.
Item N° 7439 Alloy gear carrier 52mm - 1pce.For 44T - 39T spur gears.For 10 mm diameter shafts.
Suitable for all 1:5 models. With 63 mm diameter.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.
Genuine FG spare/option part. Rubber pucks for all standard design FG spur gear carriers.Dimensions:Outside diameter: 16 mmInner diameter: 7 mmHeight: 6 mmContents:4 pieces
Customers also viewed
Genuine FG spare/option part. Center hole distance 16 mm.Spare part for:6250/016250/028450/0184521045010451 Content:2 pieces
Gearwheel protection in transpartent polycarbonate for all FG 1:5 scale models with the gear wheels 38, 40, 42 teeth. Protects the driving gear wheels almost from dirt, sand and stones. We recommend the mounting when driving on car parks. Not suitable for Formel 1, Leopard 2 + 4 Competition, Competition and Competition Evolution models.
Genuine FG spare/option part. Suitable for all FG 1:6 2WD Off-Road models except Leopard. For chopping the front axle by using On-Road tires.Dimensions:Bore diameter: 5 mmHeight: 10 mmContents:1 piece