Genuine HT spare/option part. Soft trim for body shell edges and cut-outs. Use speed glue for installation.Contents:1 piece / 3 metersPainting tips:

Painted body shell, fits Comanche and CPT without any modifications as well! Comes with decal sheet included.Fits: Smartech Monster-Truck, Carson Commanche, CRT und CPT.Measures:Length 655 mmWidth 265 mmHeight 155 mm

Unfortunately, the pin striping lines on the body shell have not been applied very carefully and should be reworked individually, if you place value on it. The body shell is vac-formed from 2 mm Lexan.Measures:Length: 890 mmWidth: 392 mmHeight: 220 mmRequired body mounts:Mount front: FG 7020/16 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 8013 Body mounts Side body mount rear: FG 3014 Body mounts

Genuine Samba spare/option part. The body shell is neither cut nor drilled, clear and can therefore be adopted to all touring cars with a 530/535 mm wheelbase.We have decided to make a new TC bodyshell to offer a new car from the WTTC series for the 5th scale drivers.Currently the most sought after large scale body shell with optimal aerodynamicsMaterial thickness 1 mm. The body shell consists of one part.Precut, the final cutting must be made according to the chassis you use it on.Width front / rear: 392 mm.Contents:1 piece

Complete with mounting kit, side flaps and nuts & bolts. The rear wing comes unpainted (clear). Dimensions wing:Width: 280 mmDepth: 45 mmDimensions wing mounts:Height: 28 mmDimensions side flaps:Width: 50 mmHeight: 30 mmPainting tips:

Painted body shell with decals.Die Karosserie passt auch auf Carson Comanche, Carson Stadium Racer, Stadium Truck, Bigfoot Race und Pickup Truck. Bei individueller Anpassung natürlich an nahezu allen 1:6er und auch vielen 1:8er RC-Cars!Measures:Wheelbase: 400 mmWith between the wheels: approx. 255 mmWith in the middle: approx. 235 mmWidth: ca. 250 mmTotal length: ca. 630 mmHeight: ca. 180 mm

Fits on all standard width touring car chassis' with 530 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan. Replacement parts: 5192 FG Front Porsche 911 GTR3 R clear 5193 FG Rear Wing Porsche 911 GTR3 R clear Required body mounts:Mount front: FG 8418 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 8014 Body mountsSide body mount rear: FG 9014/01 Body mountsDimensions:Length: 940 mmWidth: 415 mmHeight: 230 mmWheelbase: 530 mm Painting tips:

Genuine FG spare/option part. Contents:1 piecePainting tips:

Genuine FG spare/option part. The FG Marder body shell is delivered white and without window gitter or decal set.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

Contents:1 set

Item N° 32496 Rear spoiler - 1pce.Fits for Carson Attack series and FG 1/6 scale Marder and other

Genuine FG spare/option part.The bodyshell is made from colored (not painted!) polycarbonate and will be delivered without rear wing.The original FG decal set is included, ready pasted!Content:1 piece

The flexible rear wing for FG and Carson / Smartech offroad cars, with reinforcement ribs on the underside.

Genuine FG spare/option part. Dimensions:Length: 123 mmWidth: 246 mmHeight: 37 mmContents:1 piece

Genuine FG spare/option part. The body set contents the main part, front body and the rear wing. The body is clear.Required body mounts:Mount front: FG 7020/06 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsDimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mmContents:1 piecePainting tips:

Accessories for FG 58150 body shell Beetle 4WD.Contents:1 piecePainting tips:

Use instead of plastic fastening strip FG # 8418/07 (for FG front bumper # 8418).Dimensions:Width: 95,7 mmHeight: 16,8 mmDistance between holes: 75 mmBore diameter: 8 mmThickness: 2 mm

Genuine Losi spare/option part. Contents:1 piece

Weight-optimized, extremely solid rear spoiler with double wing made of impact-resistant polyamid. The spoiler generates enormous downforce on the rear axle. Suitable for the models 1:6 Off-Road Buggy, Leopard , Marder, 2WD, 4WD and models of other manufacturers.Measures:Length 115 mmWidth 280 mmHeight 40 mm

Genuine Carson spare/option part. Contents:1 set

The Set contains the front body, the main body, the rear body, the spoiler-set and the body screws. The body shell is vac-formed from 2 mm Lexan.The body shell does not come with drilled mounting holes to make it possible to fit any 1/5 car with 530/535 mm wheelbase. The set is delivered as shown.Required body mounts:Mount front: FG 7020/12 Front bumperRear body mount: FG 7152/01 Rear body mount Side body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 890 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm

Extremely flexible 6-piece body shell for Losi 5ive-T, with complete installation hardware.Made of thermoplastic elastomer (TPE), an extremely strong plastic which combines thermoplastic and elastomeric properties! Color black (the decals pictured are not included!). The elastoplastic body set fits the stock Losi 5ive-T roll cage precisely and is almost "unbreakable"! Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells.Of course, the extreme deformability of the elastoplastic body shell, compared to the stock version, is a huge advantage.And there's more with the elastoplastic body shell:Better dirt protection for the 5ive-T through partially closed wheel wells front and rear.Front and rear fenders with large cut-outs prevent contact with the tires.Integrated window nets allow for improved airflow and better engine cooling.The textured surface of the elastoplastic body shell is largely soil-resisting.Please note: This feature also makes the use of highly specialised adhesives for any kind of decals unavoidable if you want them to stay. All decals shown in the pictures for presentation are of the standard version!Even though the elastoplastic body shell is much tougher than the stock Losi 5ive-T body, the weight increase only very moderate from 902 grams to 971 grams. The body shell is a 6-piece design for best flexibility possible.Contents:1 x hood/front fender2 x side panels1 x roof2 x rear fenders1 x complete installation hardware

Genuine HPI spare/option part. Without decalsContents:1 piece

Suitable for all models with a 465 wheelbase. The body consists of the main part, front spoiler and 3-part rear spoiler.The set is delivered not painted.Required body mounts:Mount front: FG 5020/01 Front bumperRear body mount: FG 5152 Rear body mountSide body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 850 mmWidth: front 380 mm / rear 400 mmHeigth: 230 mmWheelbase: 465 mmPainting tips: